From: Dan Carpenter <dan.carpenter@oracle.com>
To: Karsten Keil <isdn@linux-pingi.de>
Cc: Arnd Bergmann <arnd@arndb.de>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch] mISDN: fix a loop count
Date: Tue, 15 Dec 2015 10:07:52 +0000 [thread overview]
Message-ID: <20151215100752.GC20848@mwanda> (raw)
There are two issue here.
1) cnt starts as maxloop + 1 so all these loops iterate one more time
than intended.
2) At the end of the loop we test for "if (maxloop && !cnt)" but for
the first two loops, we end with cnt equal to -1. Changing this to
a pre-op means we end with cnt set to 0.
Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index a77eea5..cb428b9 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -1170,7 +1170,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
if (ipac->type & IPAC_TYPE_IPACX) {
ista = ReadIPAC(ipac, ISACX_ISTA);
- while (ista && cnt--) {
+ while (ista && --cnt) {
pr_debug("%s: ISTA %02x\n", ipac->name, ista);
if (ista & IPACX__ICA)
ipac_irq(&ipac->hscx[0], ista);
@@ -1182,7 +1182,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
}
} else if (ipac->type & IPAC_TYPE_IPAC) {
ista = ReadIPAC(ipac, IPAC_ISTA);
- while (ista && cnt--) {
+ while (ista && --cnt) {
pr_debug("%s: ISTA %02x\n", ipac->name, ista);
if (ista & (IPAC__ICD | IPAC__EXD)) {
istad = ReadISAC(isac, ISAC_ISTA);
@@ -1200,7 +1200,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
ista = ReadIPAC(ipac, IPAC_ISTA);
}
} else if (ipac->type & IPAC_TYPE_HSCX) {
- while (cnt) {
+ while (--cnt) {
ista = ReadIPAC(ipac, IPAC_ISTAB + ipac->hscx[1].off);
pr_debug("%s: B2 ISTA %02x\n", ipac->name, ista);
if (ista)
@@ -1211,7 +1211,6 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
mISDNisac_irq(isac, istad);
if (0 = (ista | istad))
break;
- cnt--;
}
}
if (cnt > maxloop) /* only for ISAC/HSCX without PCI IRQ test */
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Karsten Keil <isdn@linux-pingi.de>
Cc: Arnd Bergmann <arnd@arndb.de>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch] mISDN: fix a loop count
Date: Tue, 15 Dec 2015 13:07:52 +0300 [thread overview]
Message-ID: <20151215100752.GC20848@mwanda> (raw)
There are two issue here.
1) cnt starts as maxloop + 1 so all these loops iterate one more time
than intended.
2) At the end of the loop we test for "if (maxloop && !cnt)" but for
the first two loops, we end with cnt equal to -1. Changing this to
a pre-op means we end with cnt set to 0.
Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index a77eea5..cb428b9 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -1170,7 +1170,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
if (ipac->type & IPAC_TYPE_IPACX) {
ista = ReadIPAC(ipac, ISACX_ISTA);
- while (ista && cnt--) {
+ while (ista && --cnt) {
pr_debug("%s: ISTA %02x\n", ipac->name, ista);
if (ista & IPACX__ICA)
ipac_irq(&ipac->hscx[0], ista);
@@ -1182,7 +1182,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
}
} else if (ipac->type & IPAC_TYPE_IPAC) {
ista = ReadIPAC(ipac, IPAC_ISTA);
- while (ista && cnt--) {
+ while (ista && --cnt) {
pr_debug("%s: ISTA %02x\n", ipac->name, ista);
if (ista & (IPAC__ICD | IPAC__EXD)) {
istad = ReadISAC(isac, ISAC_ISTA);
@@ -1200,7 +1200,7 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
ista = ReadIPAC(ipac, IPAC_ISTA);
}
} else if (ipac->type & IPAC_TYPE_HSCX) {
- while (cnt) {
+ while (--cnt) {
ista = ReadIPAC(ipac, IPAC_ISTAB + ipac->hscx[1].off);
pr_debug("%s: B2 ISTA %02x\n", ipac->name, ista);
if (ista)
@@ -1211,7 +1211,6 @@ mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
mISDNisac_irq(isac, istad);
if (0 == (ista | istad))
break;
- cnt--;
}
}
if (cnt > maxloop) /* only for ISAC/HSCX without PCI IRQ test */
next reply other threads:[~2015-12-15 10:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 10:07 Dan Carpenter [this message]
2015-12-15 10:07 ` [patch] mISDN: fix a loop count Dan Carpenter
2015-12-15 17:51 ` David Miller
2015-12-15 17:51 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151215100752.GC20848@mwanda \
--to=dan.carpenter@oracle.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=isdn@linux-pingi.de \
--cc=kernel-janitors@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.