From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 07/10] mfd: axp20x: Add support for RSB based AXP223 PMIC
Date: Mon, 25 Jan 2016 16:04:09 +0000 [thread overview]
Message-ID: <20160125160409.GU3368@x1> (raw)
In-Reply-To: <1452655854-1528-8-git-send-email-wens@csie.org>
On Wed, 13 Jan 2016, Chen-Yu Tsai wrote:
> The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
> It is functionally identical to AXP221; only the regulator default
> voltage/status and the external host interface are different.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>
> Changes since v6:
>
> - Drop filename from file header
> - Use generic dev_set_drvdata()
> - Properly sort #include statements
> - Add copyright notice
>
> ---
> drivers/mfd/Kconfig | 11 +++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/axp20x-rsb.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mfd/axp20x.c | 2 ++
> include/linux/mfd/axp20x.h | 1 +
> 5 files changed, 95 insertions(+)
> create mode 100644 drivers/mfd/axp20x-rsb.c
Acked-by: Lee Jones <lee@kernel.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 804cd3dcce32..13c565103e96 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -107,6 +107,17 @@ config MFD_AXP20X_I2C
> components like regulators or the PEK (Power Enable Key) under the
> corresponding menus.
>
> +config MFD_AXP20X_RSB
> + tristate "X-Powers AXP series PMICs with RSB"
> + select MFD_AXP20X
> + depends on SUNXI_RSB
> + help
> + If you say Y here you get support for the X-Powers AXP series power
> + management ICs (PMICs) controlled with RSB.
> + This driver include only the core APIs. You have to select individual
> + components like regulators or the PEK (Power Enable Key) under the
> + corresponding menus.
> +
> config MFD_CROS_EC
> tristate "ChromeOS Embedded Controller"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index a6913007d667..caea6637d5e8 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -108,6 +108,7 @@ obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> obj-$(CONFIG_MFD_AXP20X) += axp20x.o
> obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
> +obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
>
> obj-$(CONFIG_MFD_LP3943) += lp3943.o
> obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> new file mode 100644
> index 000000000000..28c20247c112
> --- /dev/null
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -0,0 +1,80 @@
> +/*
> + * RSB driver for the X-Powers' Power Management ICs
> + *
> + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
> + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
> + * as well as configurable GPIOs.
> + *
> + * This driver supports the RSB variants.
> + *
> + * Copyright (C) 2015 Chen-Yu Tsai
> + *
> + * Author: Chen-Yu Tsai <wens@csie.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/err.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/sunxi-rsb.h>
> +
> +static int axp20x_rsb_probe(struct sunxi_rsb_device *rdev)
> +{
> + struct axp20x_dev *axp20x;
> + int ret;
> +
> + axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL);
> + if (!axp20x)
> + return -ENOMEM;
> +
> + axp20x->dev = &rdev->dev;
> + axp20x->irq = rdev->irq;
> + dev_set_drvdata(&rdev->dev, axp20x);
> +
> + ret = axp20x_match_device(axp20x);
> + if (ret)
> + return ret;
> +
> + axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg);
> + if (IS_ERR(axp20x->regmap)) {
> + ret = PTR_ERR(axp20x->regmap);
> + dev_err(&rdev->dev, "regmap init failed: %d\n", ret);
> + return ret;
> + }
> +
> + return axp20x_device_probe(axp20x);
> +}
> +
> +static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
> +{
> + struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev);
> +
> + return axp20x_device_remove(axp20x);
> +}
> +
> +static const struct of_device_id axp20x_rsb_of_match[] = {
> + { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
> +
> +static struct sunxi_rsb_driver axp20x_rsb_driver = {
> + .driver = {
> + .name = "axp20x-rsb",
> + .of_match_table = of_match_ptr(axp20x_rsb_of_match),
> + },
> + .probe = axp20x_rsb_probe,
> + .remove = axp20x_rsb_remove,
> +};
> +module_sunxi_rsb_driver(axp20x_rsb_driver);
> +
> +MODULE_DESCRIPTION("PMIC MFD sunXi RSB driver for AXP20X");
> +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 3054ea4b95e8..a57d6e940610 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -35,6 +35,7 @@ static const char * const axp20x_model_names[] = {
> "AXP202",
> "AXP209",
> "AXP221",
> + "AXP223",
> "AXP288",
> };
>
> @@ -618,6 +619,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
> axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
> break;
> case AXP221_ID:
> + case AXP223_ID:
> axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
> axp20x->cells = axp22x_cells;
> axp20x->regmap_cfg = &axp22x_regmap_config;
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 00697c6ad8b0..d82e7d51372b 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -18,6 +18,7 @@ enum {
> AXP202_ID,
> AXP209_ID,
> AXP221_ID,
> + AXP223_ID,
> AXP288_ID,
> NR_AXP20X_VARIANTS,
> };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Andy Shevchenko
<andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: Re: [PATCH v7 07/10] mfd: axp20x: Add support for RSB based AXP223 PMIC
Date: Mon, 25 Jan 2016 16:04:09 +0000 [thread overview]
Message-ID: <20160125160409.GU3368@x1> (raw)
In-Reply-To: <1452655854-1528-8-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
On Wed, 13 Jan 2016, Chen-Yu Tsai wrote:
> The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
> It is functionally identical to AXP221; only the regulator default
> voltage/status and the external host interface are different.
>
> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
> ---
>
> Changes since v6:
>
> - Drop filename from file header
> - Use generic dev_set_drvdata()
> - Properly sort #include statements
> - Add copyright notice
>
> ---
> drivers/mfd/Kconfig | 11 +++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/axp20x-rsb.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mfd/axp20x.c | 2 ++
> include/linux/mfd/axp20x.h | 1 +
> 5 files changed, 95 insertions(+)
> create mode 100644 drivers/mfd/axp20x-rsb.c
Acked-by: Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 804cd3dcce32..13c565103e96 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -107,6 +107,17 @@ config MFD_AXP20X_I2C
> components like regulators or the PEK (Power Enable Key) under the
> corresponding menus.
>
> +config MFD_AXP20X_RSB
> + tristate "X-Powers AXP series PMICs with RSB"
> + select MFD_AXP20X
> + depends on SUNXI_RSB
> + help
> + If you say Y here you get support for the X-Powers AXP series power
> + management ICs (PMICs) controlled with RSB.
> + This driver include only the core APIs. You have to select individual
> + components like regulators or the PEK (Power Enable Key) under the
> + corresponding menus.
> +
> config MFD_CROS_EC
> tristate "ChromeOS Embedded Controller"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index a6913007d667..caea6637d5e8 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -108,6 +108,7 @@ obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> obj-$(CONFIG_MFD_AXP20X) += axp20x.o
> obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
> +obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
>
> obj-$(CONFIG_MFD_LP3943) += lp3943.o
> obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> new file mode 100644
> index 000000000000..28c20247c112
> --- /dev/null
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -0,0 +1,80 @@
> +/*
> + * RSB driver for the X-Powers' Power Management ICs
> + *
> + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
> + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
> + * as well as configurable GPIOs.
> + *
> + * This driver supports the RSB variants.
> + *
> + * Copyright (C) 2015 Chen-Yu Tsai
> + *
> + * Author: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/err.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/sunxi-rsb.h>
> +
> +static int axp20x_rsb_probe(struct sunxi_rsb_device *rdev)
> +{
> + struct axp20x_dev *axp20x;
> + int ret;
> +
> + axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL);
> + if (!axp20x)
> + return -ENOMEM;
> +
> + axp20x->dev = &rdev->dev;
> + axp20x->irq = rdev->irq;
> + dev_set_drvdata(&rdev->dev, axp20x);
> +
> + ret = axp20x_match_device(axp20x);
> + if (ret)
> + return ret;
> +
> + axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg);
> + if (IS_ERR(axp20x->regmap)) {
> + ret = PTR_ERR(axp20x->regmap);
> + dev_err(&rdev->dev, "regmap init failed: %d\n", ret);
> + return ret;
> + }
> +
> + return axp20x_device_probe(axp20x);
> +}
> +
> +static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
> +{
> + struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev);
> +
> + return axp20x_device_remove(axp20x);
> +}
> +
> +static const struct of_device_id axp20x_rsb_of_match[] = {
> + { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
> +
> +static struct sunxi_rsb_driver axp20x_rsb_driver = {
> + .driver = {
> + .name = "axp20x-rsb",
> + .of_match_table = of_match_ptr(axp20x_rsb_of_match),
> + },
> + .probe = axp20x_rsb_probe,
> + .remove = axp20x_rsb_remove,
> +};
> +module_sunxi_rsb_driver(axp20x_rsb_driver);
> +
> +MODULE_DESCRIPTION("PMIC MFD sunXi RSB driver for AXP20X");
> +MODULE_AUTHOR("Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 3054ea4b95e8..a57d6e940610 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -35,6 +35,7 @@ static const char * const axp20x_model_names[] = {
> "AXP202",
> "AXP209",
> "AXP221",
> + "AXP223",
> "AXP288",
> };
>
> @@ -618,6 +619,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
> axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
> break;
> case AXP221_ID:
> + case AXP223_ID:
> axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
> axp20x->cells = axp22x_cells;
> axp20x->regmap_cfg = &axp22x_regmap_config;
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 00697c6ad8b0..d82e7d51372b 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -18,6 +18,7 @@ enum {
> AXP202_ID,
> AXP209_ID,
> AXP221_ID,
> + AXP223_ID,
> AXP288_ID,
> NR_AXP20X_VARIANTS,
> };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Hans de Goede <hdegoede@redhat.com>,
Mark Brown <broonie@kernel.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Subject: Re: [PATCH v7 07/10] mfd: axp20x: Add support for RSB based AXP223 PMIC
Date: Mon, 25 Jan 2016 16:04:09 +0000 [thread overview]
Message-ID: <20160125160409.GU3368@x1> (raw)
In-Reply-To: <1452655854-1528-8-git-send-email-wens@csie.org>
On Wed, 13 Jan 2016, Chen-Yu Tsai wrote:
> The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
> It is functionally identical to AXP221; only the regulator default
> voltage/status and the external host interface are different.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>
> Changes since v6:
>
> - Drop filename from file header
> - Use generic dev_set_drvdata()
> - Properly sort #include statements
> - Add copyright notice
>
> ---
> drivers/mfd/Kconfig | 11 +++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/axp20x-rsb.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mfd/axp20x.c | 2 ++
> include/linux/mfd/axp20x.h | 1 +
> 5 files changed, 95 insertions(+)
> create mode 100644 drivers/mfd/axp20x-rsb.c
Acked-by: Lee Jones <lee@kernel.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 804cd3dcce32..13c565103e96 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -107,6 +107,17 @@ config MFD_AXP20X_I2C
> components like regulators or the PEK (Power Enable Key) under the
> corresponding menus.
>
> +config MFD_AXP20X_RSB
> + tristate "X-Powers AXP series PMICs with RSB"
> + select MFD_AXP20X
> + depends on SUNXI_RSB
> + help
> + If you say Y here you get support for the X-Powers AXP series power
> + management ICs (PMICs) controlled with RSB.
> + This driver include only the core APIs. You have to select individual
> + components like regulators or the PEK (Power Enable Key) under the
> + corresponding menus.
> +
> config MFD_CROS_EC
> tristate "ChromeOS Embedded Controller"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index a6913007d667..caea6637d5e8 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -108,6 +108,7 @@ obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> obj-$(CONFIG_MFD_AXP20X) += axp20x.o
> obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
> +obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
>
> obj-$(CONFIG_MFD_LP3943) += lp3943.o
> obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> new file mode 100644
> index 000000000000..28c20247c112
> --- /dev/null
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -0,0 +1,80 @@
> +/*
> + * RSB driver for the X-Powers' Power Management ICs
> + *
> + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
> + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
> + * as well as configurable GPIOs.
> + *
> + * This driver supports the RSB variants.
> + *
> + * Copyright (C) 2015 Chen-Yu Tsai
> + *
> + * Author: Chen-Yu Tsai <wens@csie.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/err.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/sunxi-rsb.h>
> +
> +static int axp20x_rsb_probe(struct sunxi_rsb_device *rdev)
> +{
> + struct axp20x_dev *axp20x;
> + int ret;
> +
> + axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL);
> + if (!axp20x)
> + return -ENOMEM;
> +
> + axp20x->dev = &rdev->dev;
> + axp20x->irq = rdev->irq;
> + dev_set_drvdata(&rdev->dev, axp20x);
> +
> + ret = axp20x_match_device(axp20x);
> + if (ret)
> + return ret;
> +
> + axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg);
> + if (IS_ERR(axp20x->regmap)) {
> + ret = PTR_ERR(axp20x->regmap);
> + dev_err(&rdev->dev, "regmap init failed: %d\n", ret);
> + return ret;
> + }
> +
> + return axp20x_device_probe(axp20x);
> +}
> +
> +static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
> +{
> + struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev);
> +
> + return axp20x_device_remove(axp20x);
> +}
> +
> +static const struct of_device_id axp20x_rsb_of_match[] = {
> + { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
> +
> +static struct sunxi_rsb_driver axp20x_rsb_driver = {
> + .driver = {
> + .name = "axp20x-rsb",
> + .of_match_table = of_match_ptr(axp20x_rsb_of_match),
> + },
> + .probe = axp20x_rsb_probe,
> + .remove = axp20x_rsb_remove,
> +};
> +module_sunxi_rsb_driver(axp20x_rsb_driver);
> +
> +MODULE_DESCRIPTION("PMIC MFD sunXi RSB driver for AXP20X");
> +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 3054ea4b95e8..a57d6e940610 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -35,6 +35,7 @@ static const char * const axp20x_model_names[] = {
> "AXP202",
> "AXP209",
> "AXP221",
> + "AXP223",
> "AXP288",
> };
>
> @@ -618,6 +619,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
> axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
> break;
> case AXP221_ID:
> + case AXP223_ID:
> axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
> axp20x->cells = axp22x_cells;
> axp20x->regmap_cfg = &axp22x_regmap_config;
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 00697c6ad8b0..d82e7d51372b 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -18,6 +18,7 @@ enum {
> AXP202_ID,
> AXP209_ID,
> AXP221_ID,
> + AXP223_ID,
> AXP288_ID,
> NR_AXP20X_VARIANTS,
> };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-01-25 16:04 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 3:30 [PATCH v7 00/10] mfd: axp20x: Add support for RSB based AXP223 Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 01/10] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 02/10] mfd: axp20x: Remove second struct device * parameter for axp20x_match_device() Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 03/10] mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device() Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 04/10] mfd: axp20x: Add missing copyright notice Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 8:36 ` Carlo Caione
2016-01-13 8:36 ` Carlo Caione
2016-01-13 8:36 ` Carlo Caione
2016-01-25 14:39 ` Lee Jones
2016-01-25 14:39 ` Lee Jones
2016-01-25 14:39 ` Lee Jones
2016-01-25 15:29 ` Maxime Ripard
2016-01-25 15:29 ` Maxime Ripard
2016-01-25 15:29 ` Maxime Ripard
2016-02-10 16:14 ` Lee Jones
2016-02-10 16:14 ` Lee Jones
2016-02-10 16:14 ` Lee Jones
2016-01-26 1:34 ` Chen-Yu Tsai
2016-01-26 1:34 ` Chen-Yu Tsai
2016-01-26 1:34 ` Chen-Yu Tsai
2016-01-26 8:37 ` Lee Jones
2016-01-26 8:37 ` Lee Jones
2016-01-26 8:37 ` Lee Jones
2016-02-11 15:24 ` Lee Jones
2016-02-11 15:24 ` Lee Jones
2016-02-11 15:24 ` Lee Jones
2016-02-12 2:04 ` [linux-sunxi] " Chen-Yu Tsai
2016-02-12 2:04 ` Chen-Yu Tsai
2016-02-12 2:04 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 05/10] mfd: axp20x: Split the driver into core and i2c bits Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-25 16:03 ` Lee Jones
2016-01-25 16:03 ` Lee Jones
2016-01-25 16:03 ` Lee Jones
2016-01-13 3:30 ` [PATCH v7 06/10] mfd: axp20x: Whitespace, open parenthesis alignment code style fixes Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 07/10] mfd: axp20x: Add support for RSB based AXP223 PMIC Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-25 16:04 ` Lee Jones [this message]
2016-01-25 16:04 ` Lee Jones
2016-01-25 16:04 ` Lee Jones
2016-01-13 3:30 ` [PATCH v7 08/10] regulator: axp20x: Support new " Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 09/10] ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` [PATCH v7 10/10] ARM: dts: sun8i: q8-common: " Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
2016-01-13 3:30 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160125160409.GU3368@x1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.