Re: Bypass at packet-page level (Was: Optimizing instruction-cache, more packets at each stage)

[Jesper Dangaard Brouer <brouer@redhat.com>]

On Wed, 27 Jan 2016 13:56:03 -0800
Alexei Starovoitov <alexei.starovoitov@gmail.com> wrote:

> On Wed, Jan 27, 2016 at 09:47:50PM +0100, Jesper Dangaard Brouer wrote:
> >  Sum: 18.75 % => calc: 30.0 ns (sum: 30.0 ns) => Total: 159.9 ns
> > 
> > To get around the cache-miss in eth_type_trans(), I created a
> > "icache-loop" in mlx5e_poll_rx_cq() and pull all RX-ring packets "out",
> > before calling eth_type_trans(), reducing cost to 2.45%.
> > 
> > To mitigate the SLUB slowpath, I used my slab + SKB-napi bulk API .  And
> > also tuned SLUB (with slub_nomerge slub_min_objects=128) to get bigger
> > slab-pages, thus bigger bulk opportunities.
> > 
> > This helped a lot, I can now drop 12Mpps (12,088,767 => 82.7 ns).  
> 
> great stuff. I think such batching loop will reduce the cost of
> eth_type_trans() for all use cases.
> Only unfortunate that it would need to be implemented in every driver,
> but there is only a handful that people care about in high performance
> setups, so I think it's worth getting this patch in for mlx5 and
> the other drivers will catch up.

I'm still in flux/undecided how long we should delay the first touching
of pkt-data, which happens when calling eth_type_trans().  Should it
stay in the driver or not(?).

In the extreme case, for optimize for RPS sending to remote CPUs, delay
calling eth_type_trans() as long as possible.

1. In driver only start prefetch data to L2/L3 cache
2. Stack calls get_rps_cpu() and assume skb_get_hash() have HW hash
3. (Bulk) enqueue on remote_cpu->sd->input_pkt_queue
4. On remote CPU in process_backlog call eth_type_trans() on sd->input_pkt_queue


On the other hand, if the HW desc can provide skb->proto, and we can
lazy eval skb->pkt_type, then it is okay to keep that responsibility in
the driver (as the call to eth_type_trans() basically disappears).

-- 
Best regards,
  Jesper Dangaard Brouer
  MSc.CS, Principal Kernel Engineer at Red Hat
  Author of http://www.iptv-analyzer.org
  LinkedIn: http://www.linkedin.com/in/brouer