[PATCH] clk: tango4: rename ARCH_TANGOX to ARCH_TANGO

[PATCH] clk: tango4: rename ARCH_TANGOX to ARCH_TANGO

[Marc Gonzalez]

Requested by arm-soc maintainer Kevin Hilman in v9 review.
http://article.gmane.org/gmane.linux.ports.arm.kernel/456331

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
---
IIUC, the merge window is now closed, but this patch might be
accepted in the clk-fixes branch, so that the corresponding
platform code successfully builds its clk driver.

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/mach-tango
---
 drivers/clk/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f4165bb9a270..f50cb257e0ba 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -42,7 +42,7 @@ obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
-obj-$(CONFIG_ARCH_TANGOX)		+= clk-tango4.o
+obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
-- 
2.6.3

Re: [PATCH] clk: tango4: rename ARCH_TANGOX to ARCH_TANGO

[Stephen Boyd]

On 01/29, Marc Gonzalez wrote:
> Requested by arm-soc maintainer Kevin Hilman in v9 review.
> http://article.gmane.org/gmane.linux.ports.arm.kernel/456331
> 
> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
> ---

Applied to clk-fixes

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH] clk: tango4: rename ARCH_TANGOX to ARCH_TANGO

[Marc Gonzalez]

Requested by arm-soc maintainer Kevin Hilman in v9 review.
http://article.gmane.org/gmane.linux.ports.arm.kernel/456331

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
---
 drivers/clk/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f4165bb9a270..f50cb257e0ba 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -42,7 +42,7 @@ obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
-obj-$(CONFIG_ARCH_TANGOX)		+= clk-tango4.o
+obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
-- 
2.6.3

Re: [PATCH] clk: tango4: rename ARCH_TANGOX to ARCH_TANGO

[Marc Gonzalez]

On 15/01/2016 14:25, Marc Gonzalez wrote:

> Requested by arm-soc maintainer Kevin Hilman in v9 review.
> http://article.gmane.org/gmane.linux.ports.arm.kernel/456331
> 
> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
> ---
>  drivers/clk/Makefile | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

If I understand correctly, Linux maintainers are currently busy
pushing their trees into 4.5-rc1 ?

Can this trivial fix be included in 4.5-rc2 in order to match the
platform code that will go in 4.5-rc1 ?

https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arm/mach-tango/Kconfig

Regards.