[Qemu-trivial] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Qemu-trivial] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Sitsofe Wheeler]

Bring the qemu-nbd man page up to date with options and fix some styling and
grammar issues along the way.

Changes from v1:
- Add disconnect usage to synopsis.
- Add styling to synopsis usage.
- Fix up the grammar in the description.
- Move filename variable description out of the option table.
- Add a description of the NBD dev variable.
- Add reference to qemu man page to see also section.
- Fix sentence capitalisation in options section.

Sitsofe Wheeler (3):
  qemu-nbd: Fix unintended texi verbatim formatting
  qemu-nbd: Minor texi updates
  qemu-nbd: Fix texi sentence capitalisation

 qemu-nbd.texi | 80 +++++++++++++++++++++++++++++++++--------------------------
 1 file changed, 45 insertions(+), 35 deletions(-)

-- 
2.4.3

[Qemu-devel] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Sitsofe Wheeler]

Bring the qemu-nbd man page up to date with options and fix some styling and
grammar issues along the way.

Changes from v1:
- Add disconnect usage to synopsis.
- Add styling to synopsis usage.
- Fix up the grammar in the description.
- Move filename variable description out of the option table.
- Add a description of the NBD dev variable.
- Add reference to qemu man page to see also section.
- Fix sentence capitalisation in options section.

Sitsofe Wheeler (3):
  qemu-nbd: Fix unintended texi verbatim formatting
  qemu-nbd: Minor texi updates
  qemu-nbd: Fix texi sentence capitalisation

 qemu-nbd.texi | 80 +++++++++++++++++++++++++++++++++--------------------------
 1 file changed, 45 insertions(+), 35 deletions(-)

-- 
2.4.3

[Qemu-trivial] [PATCH v2 1/3] qemu-nbd: Fix unintended texi verbatim formatting

[Sitsofe Wheeler]

Indented lines in the texi meant the perlpod produced interpreted the
paragraph as being verbatim (thus formatting codes were not
interpreted). Fix this by un-indenting problem lines.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
---
 qemu-nbd.texi | 58 +++++++++++++++++++++++++++++-----------------------------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 46fd483..26cc985 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -13,56 +13,56 @@ Export QEMU disk image using NBD protocol.
 @c man begin OPTIONS
 @table @option
 @item @var{filename}
- is a disk image filename
+is a disk image filename
 @item -p, --port=@var{port}
-  port to listen on (default @samp{10809})
+port to listen on (default @samp{10809})
 @item -o, --offset=@var{offset}
-  offset into the image
+offset into the image
 @item -b, --bind=@var{iface}
-  interface to bind to (default @samp{0.0.0.0})
+interface to bind to (default @samp{0.0.0.0})
 @item -k, --socket=@var{path}
-  Use a unix socket with path @var{path}
+Use a unix socket with path @var{path}
 @item -f, --format=@var{format}
-  Set image format as @var{format}
+Set image format as @var{format}
 @item -r, --read-only
-  export read-only
+export read-only
 @item -P, --partition=@var{num}
-  only expose partition @var{num}
+only expose partition @var{num}
 @item -s, --snapshot
-  use @var{filename} as an external snapshot, create a temporary
-  file with backing_file=@var{filename}, redirect the write to
-  the temporary one
+use @var{filename} as an external snapshot, create a temporary
+file with backing_file=@var{filename}, redirect the write to
+the temporary one
 @item -l, --load-snapshot=@var{snapshot_param}
-  load an internal snapshot inside @var{filename} and export it
-  as an read-only device, @var{snapshot_param} format is
-  'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
+load an internal snapshot inside @var{filename} and export it
+as an read-only device, @var{snapshot_param} format is
+'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
 @item -n, --nocache
 @itemx --cache=@var{cache}
-  set cache mode to be used with the file.  See the documentation of
-  the emulator's @code{-drive cache=...} option for allowed values.
+set cache mode to be used with the file.  See the documentation of
+the emulator's @code{-drive cache=...} option for allowed values.
 @item --aio=@var{aio}
-  choose asynchronous I/O mode between @samp{threads} (the default)
-  and @samp{native} (Linux only).
+choose asynchronous I/O mode between @samp{threads} (the default)
+and @samp{native} (Linux only).
 @item --discard=@var{discard}
-  toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
-  requests are ignored or passed to the filesystem.  The default is no
-  (@samp{--discard=ignore}).
+toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+requests are ignored or passed to the filesystem.  The default is no
+(@samp{--discard=ignore}).
 @item -c, --connect=@var{dev}
-  connect @var{filename} to NBD device @var{dev}
+connect @var{filename} to NBD device @var{dev}
 @item -d, --disconnect
-  disconnect the specified device
+disconnect the specified device
 @item -e, --shared=@var{num}
-  device can be shared by @var{num} clients (default @samp{1})
+device can be shared by @var{num} clients (default @samp{1})
 @item -f, --format=@var{fmt}
-  force block driver for format @var{fmt} instead of auto-detecting
+force block driver for format @var{fmt} instead of auto-detecting
 @item -t, --persistent
-  don't exit on the last connection
+don't exit on the last connection
 @item -v, --verbose
-  display extra debugging information
+display extra debugging information
 @item -h, --help
-  display this help and exit
+display this help and exit
 @item -V, --version
-  output version information and exit
+output version information and exit
 @end table
 
 @c man end
-- 
2.4.3

[Qemu-devel] [PATCH v2 1/3] qemu-nbd: Fix unintended texi verbatim formatting

[Sitsofe Wheeler]

Indented lines in the texi meant the perlpod produced interpreted the
paragraph as being verbatim (thus formatting codes were not
interpreted). Fix this by un-indenting problem lines.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
---
 qemu-nbd.texi | 58 +++++++++++++++++++++++++++++-----------------------------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 46fd483..26cc985 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -13,56 +13,56 @@ Export QEMU disk image using NBD protocol.
 @c man begin OPTIONS
 @table @option
 @item @var{filename}
- is a disk image filename
+is a disk image filename
 @item -p, --port=@var{port}
-  port to listen on (default @samp{10809})
+port to listen on (default @samp{10809})
 @item -o, --offset=@var{offset}
-  offset into the image
+offset into the image
 @item -b, --bind=@var{iface}
-  interface to bind to (default @samp{0.0.0.0})
+interface to bind to (default @samp{0.0.0.0})
 @item -k, --socket=@var{path}
-  Use a unix socket with path @var{path}
+Use a unix socket with path @var{path}
 @item -f, --format=@var{format}
-  Set image format as @var{format}
+Set image format as @var{format}
 @item -r, --read-only
-  export read-only
+export read-only
 @item -P, --partition=@var{num}
-  only expose partition @var{num}
+only expose partition @var{num}
 @item -s, --snapshot
-  use @var{filename} as an external snapshot, create a temporary
-  file with backing_file=@var{filename}, redirect the write to
-  the temporary one
+use @var{filename} as an external snapshot, create a temporary
+file with backing_file=@var{filename}, redirect the write to
+the temporary one
 @item -l, --load-snapshot=@var{snapshot_param}
-  load an internal snapshot inside @var{filename} and export it
-  as an read-only device, @var{snapshot_param} format is
-  'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
+load an internal snapshot inside @var{filename} and export it
+as an read-only device, @var{snapshot_param} format is
+'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
 @item -n, --nocache
 @itemx --cache=@var{cache}
-  set cache mode to be used with the file.  See the documentation of
-  the emulator's @code{-drive cache=...} option for allowed values.
+set cache mode to be used with the file.  See the documentation of
+the emulator's @code{-drive cache=...} option for allowed values.
 @item --aio=@var{aio}
-  choose asynchronous I/O mode between @samp{threads} (the default)
-  and @samp{native} (Linux only).
+choose asynchronous I/O mode between @samp{threads} (the default)
+and @samp{native} (Linux only).
 @item --discard=@var{discard}
-  toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
-  requests are ignored or passed to the filesystem.  The default is no
-  (@samp{--discard=ignore}).
+toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+requests are ignored or passed to the filesystem.  The default is no
+(@samp{--discard=ignore}).
 @item -c, --connect=@var{dev}
-  connect @var{filename} to NBD device @var{dev}
+connect @var{filename} to NBD device @var{dev}
 @item -d, --disconnect
-  disconnect the specified device
+disconnect the specified device
 @item -e, --shared=@var{num}
-  device can be shared by @var{num} clients (default @samp{1})
+device can be shared by @var{num} clients (default @samp{1})
 @item -f, --format=@var{fmt}
-  force block driver for format @var{fmt} instead of auto-detecting
+force block driver for format @var{fmt} instead of auto-detecting
 @item -t, --persistent
-  don't exit on the last connection
+don't exit on the last connection
 @item -v, --verbose
-  display extra debugging information
+display extra debugging information
 @item -h, --help
-  display this help and exit
+display this help and exit
 @item -V, --version
-  output version information and exit
+output version information and exit
 @end table
 
 @c man end
-- 
2.4.3

[Qemu-trivial] [PATCH v2 2/3] qemu-nbd: Minor texi updates

[Sitsofe Wheeler]

- Change some spacing.
- Add disconnect usage to synopsis.
- Highlight the command and its options in the synopsis.
- Fix up the grammar in the description.
- Move filename variable description out of the option table.
- Add a description of the dev variable.
- Remove duplicate entry for --format.
- Reword --discard documentation.
- Add --detect-zeroes documentation.
- Add reference to qemu man page to see also section.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
---
 qemu-nbd.texi | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 26cc985..5331d69 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -1,19 +1,23 @@
 @example
 @c man begin SYNOPSIS
-usage: qemu-nbd [OPTION]...  @var{filename}
+@command{qemu-nbd} [OPTION]... @var{filename}
+
+@command{qemu-nbd} @option{-d} @var{dev}
 @c man end
 @end example
 
 @c man begin DESCRIPTION
 
-Export QEMU disk image using NBD protocol.
+Export a QEMU disk image using the NBD protocol.
 
 @c man end
 
 @c man begin OPTIONS
+@var{filename} is a disk image filename.
+
+@var{dev} is an NBD device.
+
 @table @option
-@item @var{filename}
-is a disk image filename
 @item -p, --port=@var{port}
 port to listen on (default @samp{10809})
 @item -o, --offset=@var{offset}
@@ -22,8 +26,9 @@ offset into the image
 interface to bind to (default @samp{0.0.0.0})
 @item -k, --socket=@var{path}
 Use a unix socket with path @var{path}
-@item -f, --format=@var{format}
-Set image format as @var{format}
+@item -f, --format=@var{fmt}
+force the use of the block driver for format @var{fmt} instead of
+auto-detecting
 @item -r, --read-only
 export read-only
 @item -P, --partition=@var{num}
@@ -44,17 +49,22 @@ the emulator's @code{-drive cache=...} option for allowed values.
 choose asynchronous I/O mode between @samp{threads} (the default)
 and @samp{native} (Linux only).
 @item --discard=@var{discard}
-toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
-requests are ignored or passed to the filesystem.  The default is no
-(@samp{--discard=ignore}).
+controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+requests are ignored or passed to the filesystem.  @var{discard} is one of
+@samp{ignore} (or @samp{off}), @samp{unmap} (or @samp{on}).  The default is
+@samp{ignore}.
+@item --detect-zeroes=@var{detect-zeroes}
+enables the automatic conversion of plain zero writes by the OS to
+driver-specific optimized zero write commands.  @var{detect-zeroes} is one of
+@samp{off}, @samp{on} or @samp{unmap}.  @samp{unmap}
+converts a zero write to an unmap operation and can only be used if
+@var{discard} is set to @samp{unmap}.  The default is @samp{off}.
 @item -c, --connect=@var{dev}
 connect @var{filename} to NBD device @var{dev}
 @item -d, --disconnect
 disconnect the specified device
 @item -e, --shared=@var{num}
 device can be shared by @var{num} clients (default @samp{1})
-@item -f, --format=@var{fmt}
-force block driver for format @var{fmt} instead of auto-detecting
 @item -t, --persistent
 don't exit on the last connection
 @item -v, --verbose
@@ -79,7 +89,7 @@ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 @c man end
 
 @c man begin SEEALSO
-qemu-img(1)
+qemu(1), qemu-img(1)
 @c man end
 
 @end ignore
-- 
2.4.3

[Qemu-devel] [PATCH v2 2/3] qemu-nbd: Minor texi updates

[Sitsofe Wheeler]

- Change some spacing.
- Add disconnect usage to synopsis.
- Highlight the command and its options in the synopsis.
- Fix up the grammar in the description.
- Move filename variable description out of the option table.
- Add a description of the dev variable.
- Remove duplicate entry for --format.
- Reword --discard documentation.
- Add --detect-zeroes documentation.
- Add reference to qemu man page to see also section.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
---
 qemu-nbd.texi | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 26cc985..5331d69 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -1,19 +1,23 @@
 @example
 @c man begin SYNOPSIS
-usage: qemu-nbd [OPTION]...  @var{filename}
+@command{qemu-nbd} [OPTION]... @var{filename}
+
+@command{qemu-nbd} @option{-d} @var{dev}
 @c man end
 @end example
 
 @c man begin DESCRIPTION
 
-Export QEMU disk image using NBD protocol.
+Export a QEMU disk image using the NBD protocol.
 
 @c man end
 
 @c man begin OPTIONS
+@var{filename} is a disk image filename.
+
+@var{dev} is an NBD device.
+
 @table @option
-@item @var{filename}
-is a disk image filename
 @item -p, --port=@var{port}
 port to listen on (default @samp{10809})
 @item -o, --offset=@var{offset}
@@ -22,8 +26,9 @@ offset into the image
 interface to bind to (default @samp{0.0.0.0})
 @item -k, --socket=@var{path}
 Use a unix socket with path @var{path}
-@item -f, --format=@var{format}
-Set image format as @var{format}
+@item -f, --format=@var{fmt}
+force the use of the block driver for format @var{fmt} instead of
+auto-detecting
 @item -r, --read-only
 export read-only
 @item -P, --partition=@var{num}
@@ -44,17 +49,22 @@ the emulator's @code{-drive cache=...} option for allowed values.
 choose asynchronous I/O mode between @samp{threads} (the default)
 and @samp{native} (Linux only).
 @item --discard=@var{discard}
-toggles whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
-requests are ignored or passed to the filesystem.  The default is no
-(@samp{--discard=ignore}).
+controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+requests are ignored or passed to the filesystem.  @var{discard} is one of
+@samp{ignore} (or @samp{off}), @samp{unmap} (or @samp{on}).  The default is
+@samp{ignore}.
+@item --detect-zeroes=@var{detect-zeroes}
+enables the automatic conversion of plain zero writes by the OS to
+driver-specific optimized zero write commands.  @var{detect-zeroes} is one of
+@samp{off}, @samp{on} or @samp{unmap}.  @samp{unmap}
+converts a zero write to an unmap operation and can only be used if
+@var{discard} is set to @samp{unmap}.  The default is @samp{off}.
 @item -c, --connect=@var{dev}
 connect @var{filename} to NBD device @var{dev}
 @item -d, --disconnect
 disconnect the specified device
 @item -e, --shared=@var{num}
 device can be shared by @var{num} clients (default @samp{1})
-@item -f, --format=@var{fmt}
-force block driver for format @var{fmt} instead of auto-detecting
 @item -t, --persistent
 don't exit on the last connection
 @item -v, --verbose
@@ -79,7 +89,7 @@ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 @c man end
 
 @c man begin SEEALSO
-qemu-img(1)
+qemu(1), qemu-img(1)
 @c man end
 
 @end ignore
-- 
2.4.3

Re: [Qemu-trivial] [PATCH v2 2/3] qemu-nbd: Minor texi updates

[Paolo Bonzini]

On 05/01/2016 08:33, Sitsofe Wheeler wrote:
>  @example
>  @c man begin SYNOPSIS
> -usage: qemu-nbd [OPTION]...  @var{filename}
> +@command{qemu-nbd} [OPTION]... @var{filename}

Could you send another patch that does this change (add @command, remove
"usage:") for the other man pages as well?

Paolo

Re: [Qemu-devel] [PATCH v2 2/3] qemu-nbd: Minor texi updates

[Paolo Bonzini]

On 05/01/2016 08:33, Sitsofe Wheeler wrote:
>  @example
>  @c man begin SYNOPSIS
> -usage: qemu-nbd [OPTION]...  @var{filename}
> +@command{qemu-nbd} [OPTION]... @var{filename}

Could you send another patch that does this change (add @command, remove
"usage:") for the other man pages as well?

Paolo

Re: [Qemu-trivial] [PATCH v2 2/3] qemu-nbd: Minor texi updates

[Sitsofe Wheeler]

On Thu, Jan 07, 2016 at 01:41:53PM +0100, Paolo Bonzini wrote:
> 
> On 05/01/2016 08:33, Sitsofe Wheeler wrote:
> >  @example
> >  @c man begin SYNOPSIS
> > -usage: qemu-nbd [OPTION]...  @var{filename}
> > +@command{qemu-nbd} [OPTION]... @var{filename}
> 
> Could you send another patch that does this change (add @command, remove
> "usage:") for the other man pages as well?

OK I'll see what I can do.

-- 
Sitsofe | http://sucs.org/~sits/

Re: [Qemu-devel] [PATCH v2 2/3] qemu-nbd: Minor texi updates

[Sitsofe Wheeler]

On Thu, Jan 07, 2016 at 01:41:53PM +0100, Paolo Bonzini wrote:
> 
> On 05/01/2016 08:33, Sitsofe Wheeler wrote:
> >  @example
> >  @c man begin SYNOPSIS
> > -usage: qemu-nbd [OPTION]...  @var{filename}
> > +@command{qemu-nbd} [OPTION]... @var{filename}
> 
> Could you send another patch that does this change (add @command, remove
> "usage:") for the other man pages as well?

OK I'll see what I can do.

-- 
Sitsofe | http://sucs.org/~sits/

[Qemu-trivial] [PATCH v2 3/3] qemu-nbd: Fix texi sentence capitalisation

[Sitsofe Wheeler]

Capitalise the first letter of sentences (and reword for grammar) the
options section of qemu-nbd.texi.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
---
 qemu-nbd.texi | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 5331d69..0027841 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -19,60 +19,60 @@ Export a QEMU disk image using the NBD protocol.
 
 @table @option
 @item -p, --port=@var{port}
-port to listen on (default @samp{10809})
+The TCP port to listen on (default @samp{10809})
 @item -o, --offset=@var{offset}
-offset into the image
+The offset into the image
 @item -b, --bind=@var{iface}
-interface to bind to (default @samp{0.0.0.0})
+The interface to bind to (default @samp{0.0.0.0})
 @item -k, --socket=@var{path}
 Use a unix socket with path @var{path}
 @item -f, --format=@var{fmt}
-force the use of the block driver for format @var{fmt} instead of
+Force the use of the block driver for format @var{fmt} instead of
 auto-detecting
 @item -r, --read-only
-export read-only
+Export the disk as read-only
 @item -P, --partition=@var{num}
-only expose partition @var{num}
+Only expose partition @var{num}
 @item -s, --snapshot
-use @var{filename} as an external snapshot, create a temporary
+Use @var{filename} as an external snapshot, create a temporary
 file with backing_file=@var{filename}, redirect the write to
 the temporary one
 @item -l, --load-snapshot=@var{snapshot_param}
-load an internal snapshot inside @var{filename} and export it
+Load an internal snapshot inside @var{filename} and export it
 as an read-only device, @var{snapshot_param} format is
 'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
 @item -n, --nocache
 @itemx --cache=@var{cache}
-set cache mode to be used with the file.  See the documentation of
+The cache mode to be used with the file.  See the documentation of
 the emulator's @code{-drive cache=...} option for allowed values.
 @item --aio=@var{aio}
-choose asynchronous I/O mode between @samp{threads} (the default)
+Set the asynchronous I/O mode between @samp{threads} (the default)
 and @samp{native} (Linux only).
 @item --discard=@var{discard}
-controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+Control whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
 requests are ignored or passed to the filesystem.  @var{discard} is one of
 @samp{ignore} (or @samp{off}), @samp{unmap} (or @samp{on}).  The default is
 @samp{ignore}.
 @item --detect-zeroes=@var{detect-zeroes}
-enables the automatic conversion of plain zero writes by the OS to
+Control the automatic conversion of plain zero writes by the OS to
 driver-specific optimized zero write commands.  @var{detect-zeroes} is one of
 @samp{off}, @samp{on} or @samp{unmap}.  @samp{unmap}
 converts a zero write to an unmap operation and can only be used if
 @var{discard} is set to @samp{unmap}.  The default is @samp{off}.
 @item -c, --connect=@var{dev}
-connect @var{filename} to NBD device @var{dev}
+Connect @var{filename} to NBD device @var{dev}
 @item -d, --disconnect
-disconnect the specified device
+Disconnect the device @var{dev}
 @item -e, --shared=@var{num}
-device can be shared by @var{num} clients (default @samp{1})
+Allow up to @var{num} clients to share the device (default @samp{1})
 @item -t, --persistent
-don't exit on the last connection
+Don't exit on the last connection
 @item -v, --verbose
-display extra debugging information
+Display extra debugging information
 @item -h, --help
-display this help and exit
+Display this help and exit
 @item -V, --version
-output version information and exit
+Display version information and exit
 @end table
 
 @c man end
-- 
2.4.3

[Qemu-devel] [PATCH v2 3/3] qemu-nbd: Fix texi sentence capitalisation

[Sitsofe Wheeler]

Capitalise the first letter of sentences (and reword for grammar) the
options section of qemu-nbd.texi.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
---
 qemu-nbd.texi | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 5331d69..0027841 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -19,60 +19,60 @@ Export a QEMU disk image using the NBD protocol.
 
 @table @option
 @item -p, --port=@var{port}
-port to listen on (default @samp{10809})
+The TCP port to listen on (default @samp{10809})
 @item -o, --offset=@var{offset}
-offset into the image
+The offset into the image
 @item -b, --bind=@var{iface}
-interface to bind to (default @samp{0.0.0.0})
+The interface to bind to (default @samp{0.0.0.0})
 @item -k, --socket=@var{path}
 Use a unix socket with path @var{path}
 @item -f, --format=@var{fmt}
-force the use of the block driver for format @var{fmt} instead of
+Force the use of the block driver for format @var{fmt} instead of
 auto-detecting
 @item -r, --read-only
-export read-only
+Export the disk as read-only
 @item -P, --partition=@var{num}
-only expose partition @var{num}
+Only expose partition @var{num}
 @item -s, --snapshot
-use @var{filename} as an external snapshot, create a temporary
+Use @var{filename} as an external snapshot, create a temporary
 file with backing_file=@var{filename}, redirect the write to
 the temporary one
 @item -l, --load-snapshot=@var{snapshot_param}
-load an internal snapshot inside @var{filename} and export it
+Load an internal snapshot inside @var{filename} and export it
 as an read-only device, @var{snapshot_param} format is
 'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
 @item -n, --nocache
 @itemx --cache=@var{cache}
-set cache mode to be used with the file.  See the documentation of
+The cache mode to be used with the file.  See the documentation of
 the emulator's @code{-drive cache=...} option for allowed values.
 @item --aio=@var{aio}
-choose asynchronous I/O mode between @samp{threads} (the default)
+Set the asynchronous I/O mode between @samp{threads} (the default)
 and @samp{native} (Linux only).
 @item --discard=@var{discard}
-controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
+Control whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
 requests are ignored or passed to the filesystem.  @var{discard} is one of
 @samp{ignore} (or @samp{off}), @samp{unmap} (or @samp{on}).  The default is
 @samp{ignore}.
 @item --detect-zeroes=@var{detect-zeroes}
-enables the automatic conversion of plain zero writes by the OS to
+Control the automatic conversion of plain zero writes by the OS to
 driver-specific optimized zero write commands.  @var{detect-zeroes} is one of
 @samp{off}, @samp{on} or @samp{unmap}.  @samp{unmap}
 converts a zero write to an unmap operation and can only be used if
 @var{discard} is set to @samp{unmap}.  The default is @samp{off}.
 @item -c, --connect=@var{dev}
-connect @var{filename} to NBD device @var{dev}
+Connect @var{filename} to NBD device @var{dev}
 @item -d, --disconnect
-disconnect the specified device
+Disconnect the device @var{dev}
 @item -e, --shared=@var{num}
-device can be shared by @var{num} clients (default @samp{1})
+Allow up to @var{num} clients to share the device (default @samp{1})
 @item -t, --persistent
-don't exit on the last connection
+Don't exit on the last connection
 @item -v, --verbose
-display extra debugging information
+Display extra debugging information
 @item -h, --help
-display this help and exit
+Display this help and exit
 @item -V, --version
-output version information and exit
+Display version information and exit
 @end table
 
 @c man end
-- 
2.4.3

Re: [Qemu-trivial] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Paolo Bonzini]

On 05/01/2016 08:33, Sitsofe Wheeler wrote:
> Bring the qemu-nbd man page up to date with options and fix some styling and
> grammar issues along the way.
> 
> Changes from v1:
> - Add disconnect usage to synopsis.
> - Add styling to synopsis usage.
> - Fix up the grammar in the description.
> - Move filename variable description out of the option table.
> - Add a description of the NBD dev variable.
> - Add reference to qemu man page to see also section.
> - Fix sentence capitalisation in options section.
> 
> Sitsofe Wheeler (3):
>   qemu-nbd: Fix unintended texi verbatim formatting
>   qemu-nbd: Minor texi updates
>   qemu-nbd: Fix texi sentence capitalisation
> 
>  qemu-nbd.texi | 80 +++++++++++++++++++++++++++++++++--------------------------
>  1 file changed, 45 insertions(+), 35 deletions(-)
> 

Thanks, queued.  Will send a pull request some time next week.

Paolo

Re: [Qemu-devel] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Paolo Bonzini]

On 05/01/2016 08:33, Sitsofe Wheeler wrote:
> Bring the qemu-nbd man page up to date with options and fix some styling and
> grammar issues along the way.
> 
> Changes from v1:
> - Add disconnect usage to synopsis.
> - Add styling to synopsis usage.
> - Fix up the grammar in the description.
> - Move filename variable description out of the option table.
> - Add a description of the NBD dev variable.
> - Add reference to qemu man page to see also section.
> - Fix sentence capitalisation in options section.
> 
> Sitsofe Wheeler (3):
>   qemu-nbd: Fix unintended texi verbatim formatting
>   qemu-nbd: Minor texi updates
>   qemu-nbd: Fix texi sentence capitalisation
> 
>  qemu-nbd.texi | 80 +++++++++++++++++++++++++++++++++--------------------------
>  1 file changed, 45 insertions(+), 35 deletions(-)
> 

Thanks, queued.  Will send a pull request some time next week.

Paolo

Re: [Qemu-trivial] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Sitsofe Wheeler]

Hi,

On Thu, Jan 07, 2016 at 01:42:17PM +0100, Paolo Bonzini wrote:
> 
> On 05/01/2016 08:33, Sitsofe Wheeler wrote:
> > Bring the qemu-nbd man page up to date with options and fix some styling and
> > grammar issues along the way.
> > 
> > Changes from v1:
> > - Add disconnect usage to synopsis.
> > - Add styling to synopsis usage.
> > - Fix up the grammar in the description.
> > - Move filename variable description out of the option table.
> > - Add a description of the NBD dev variable.
> > - Add reference to qemu man page to see also section.
> > - Fix sentence capitalisation in options section.
> > 
> > Sitsofe Wheeler (3):
> >   qemu-nbd: Fix unintended texi verbatim formatting
> >   qemu-nbd: Minor texi updates
> >   qemu-nbd: Fix texi sentence capitalisation
> > 
> >  qemu-nbd.texi | 80 +++++++++++++++++++++++++++++++++--------------------------
> >  1 file changed, 45 insertions(+), 35 deletions(-)
> > 
> 
> Thanks, queued.  Will send a pull request some time next week.

Just checking - did this one get lost? Nothing's popped up in the QEMU
git repos yet...

-- 
Sitsofe | http://sucs.org/~sits/

Re: [Qemu-devel] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Sitsofe Wheeler]

Hi,

On Thu, Jan 07, 2016 at 01:42:17PM +0100, Paolo Bonzini wrote:
> 
> On 05/01/2016 08:33, Sitsofe Wheeler wrote:
> > Bring the qemu-nbd man page up to date with options and fix some styling and
> > grammar issues along the way.
> > 
> > Changes from v1:
> > - Add disconnect usage to synopsis.
> > - Add styling to synopsis usage.
> > - Fix up the grammar in the description.
> > - Move filename variable description out of the option table.
> > - Add a description of the NBD dev variable.
> > - Add reference to qemu man page to see also section.
> > - Fix sentence capitalisation in options section.
> > 
> > Sitsofe Wheeler (3):
> >   qemu-nbd: Fix unintended texi verbatim formatting
> >   qemu-nbd: Minor texi updates
> >   qemu-nbd: Fix texi sentence capitalisation
> > 
> >  qemu-nbd.texi | 80 +++++++++++++++++++++++++++++++++--------------------------
> >  1 file changed, 45 insertions(+), 35 deletions(-)
> > 
> 
> Thanks, queued.  Will send a pull request some time next week.

Just checking - did this one get lost? Nothing's popped up in the QEMU
git repos yet...

-- 
Sitsofe | http://sucs.org/~sits/

Re: [Qemu-trivial] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Paolo Bonzini]

On 31/01/2016 14:25, Sitsofe Wheeler wrote:
>> > Thanks, queued.  Will send a pull request some time next week.
> Just checking - did this one get lost? Nothing's popped up in the QEMU
> git repos yet...

Hmm, yes.  Thanks for telling me.

Paolo

Re: [Qemu-devel] [PATCH v2 0/3] qemu-nbd.texi formatting, grammar and completeness fixes

[Paolo Bonzini]

On 31/01/2016 14:25, Sitsofe Wheeler wrote:
>> > Thanks, queued.  Will send a pull request some time next week.
> Just checking - did this one get lost? Nothing's popped up in the QEMU
> git repos yet...

Hmm, yes.  Thanks for telling me.

Paolo