* [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error
@ 2016-02-03 6:45 박재홍
2016-02-03 7:33 ` Gilles Chanteperdrix
2016-02-03 7:41 ` Gilles Chanteperdrix
0 siblings, 2 replies; 4+ messages in thread
From: 박재홍 @ 2016-02-03 6:45 UTC (permalink / raw)
To: xenomai
hello
after ipipe patched, build error
# cd linux-3.18.20
# ../xenomai-3.0.1/scripts/prepare-kernel.sh --arch=x86_64 --ipipe=../ipipe-core-3.18.20-x86-4.patch
# make menuconfig
-> "Power Management and ACPI options" -- "CPU Frequency scaling" -- "CPU Frequency scaling"
-> "Power Management and ACPI options" -- "ACPI(~) Support" -- "Processor"
-> "Power Management and ACPI options" -- "Cpuidle Driver for Intel Processors"
-> "Power Management and ACPI options" -- "CPU idle PM Support"
-> "Bus options(PCI etc.)" -- "Message Signaled Interrupts (MSI and MSI-X)"
-> "Device Drivers" -- "Input device support" -- "Miscellaneous devices" -- "PC Speaker support"
all disabled
#make
##################error###############################################3
CC [M] drivers/net/wireless/rtlwifi/rtl8192ee/trx.o
CC [M] drivers/staging/unisys/uislib/uisutils.o
CC [M] drivers/usb/misc/lvstest.o
CC [M] drivers/uwb/umc-drv.o
CC [M] drivers/staging/speakup/thread.o
CC [M] drivers/uwb/whci.o
CC [M] drivers/net/wireless/rtlwifi/rtl8192se/sw.o
drivers/staging/unisys/uislib/uisutils.c: In function ‘uisctrl_register_req_handler’:
drivers/staging/unisys/uislib/uisutils.c:101:8: error: ‘VERSION’ undeclared (first use in this function)
VERSION, NULL);
^
drivers/staging/unisys/uislib/uisutils.c:101:8: note: each undeclared identifier is reported only once for each function it appears in
drivers/staging/unisys/uislib/uisutils.c: In function ‘uisctrl_register_req_handler_ex’:
drivers/staging/unisys/uislib/uisutils.c:154:19: error: ‘VERSION’ undeclared (first use in this function)
"uislib", VERSION, NULL);
^
scripts/Makefile.build:257: recipe for target 'drivers/staging/unisys/uislib/uisutils.o' failed
make[5]: *** [drivers/staging/unisys/uislib/uisutils.o] Error 1
scripts/Makefile.build:402: recipe for target 'drivers/staging/unisys/uislib' failed
make[4]: *** [drivers/staging/unisys/uislib] Error 2
scripts/Makefile.build:402: recipe for target 'drivers/staging/unisys' failed
make[3]: *** [drivers/staging/unisys] Error 2
make[3]: *** 끝나지 않은 작업을 기다리고 있습니다....
CC [M] drivers/net/wireless/rtlwifi/rtl8192se/table.o
CC [M] drivers/staging/speakup/varhandlers.o
CC [M] drivers/staging/rtl8723au/os_dep/usb_intf.o
CC [M] drivers/usb/misc/sisusbvga/sisusb.o
LD [M] drivers/net/wireless/rtlwifi/rtl8192ee/rtl8192ee.o
CC [M] drivers/usb/misc/sisusbvga/sisusb_init.o
CC [M] drivers/usb/misc/sisusbvga/sisusb_con.o
########################################################################################
help me please
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error
2016-02-03 6:45 [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error 박재홍
@ 2016-02-03 7:33 ` Gilles Chanteperdrix
2016-02-03 7:41 ` Gilles Chanteperdrix
1 sibling, 0 replies; 4+ messages in thread
From: Gilles Chanteperdrix @ 2016-02-03 7:33 UTC (permalink / raw)
To: 박재홍; +Cc: xenomai
On Wed, Feb 03, 2016 at 03:45:05PM +0900, 박재홍 wrote:
> hello
>
> after ipipe patched, build error
>
>
> # cd linux-3.18.20
>
> # ../xenomai-3.0.1/scripts/prepare-kernel.sh --arch=x86_64 --ipipe=../ipipe-core-3.18.20-x86-4.patch
>
> # make menuconfig
> -> "Power Management and ACPI options" -- "CPU Frequency scaling" -- "CPU Frequency scaling"
> -> "Power Management and ACPI options" -- "ACPI(~) Support" -- "Processor"
> -> "Power Management and ACPI options" -- "Cpuidle Driver for Intel Processors"
> -> "Power Management and ACPI options" -- "CPU idle PM Support"
> -> "Bus options(PCI etc.)" -- "Message Signaled Interrupts (MSI and MSI-X)"
> -> "Device Drivers" -- "Input device support" -- "Miscellaneous devices" -- "PC Speaker support"
> all disabled
>
> #make
>
> ##################error###############################################3
>
> CC [M] drivers/net/wireless/rtlwifi/rtl8192ee/trx.o
> CC [M] drivers/staging/unisys/uislib/uisutils.o
> CC [M] drivers/usb/misc/lvstest.o
> CC [M] drivers/uwb/umc-drv.o
> CC [M] drivers/staging/speakup/thread.o
> CC [M] drivers/uwb/whci.o
> CC [M] drivers/net/wireless/rtlwifi/rtl8192se/sw.o
> drivers/staging/unisys/uislib/uisutils.c: In function ‘uisctrl_register_req_handler’:
> drivers/staging/unisys/uislib/uisutils.c:101:8: error: ‘VERSION’ undeclared (first use in this function)
> VERSION, NULL);
> ^
> drivers/staging/unisys/uislib/uisutils.c:101:8: note: each undeclared identifier is reported only once for each function it appears in
> drivers/staging/unisys/uislib/uisutils.c: In function ‘uisctrl_register_req_handler_ex’:
> drivers/staging/unisys/uislib/uisutils.c:154:19: error: ‘VERSION’ undeclared (first use in this function)
> "uislib", VERSION, NULL);
> ^
> scripts/Makefile.build:257: recipe for target 'drivers/staging/unisys/uislib/uisutils.o' failed
> make[5]: *** [drivers/staging/unisys/uislib/uisutils.o] Error 1
> scripts/Makefile.build:402: recipe for target 'drivers/staging/unisys/uislib' failed
> make[4]: *** [drivers/staging/unisys/uislib] Error 2
> scripts/Makefile.build:402: recipe for target 'drivers/staging/unisys' failed
> make[3]: *** [drivers/staging/unisys] Error 2
> make[3]: *** 끝나지 않은 작업을 기다리고 있습니다....
> CC [M] drivers/net/wireless/rtlwifi/rtl8192se/table.o
> CC [M] drivers/staging/speakup/varhandlers.o
> CC [M] drivers/staging/rtl8723au/os_dep/usb_intf.o
> CC [M] drivers/usb/misc/sisusbvga/sisusb.o
> LD [M] drivers/net/wireless/rtlwifi/rtl8192ee/rtl8192ee.o
> CC [M] drivers/usb/misc/sisusbvga/sisusb_init.o
> CC [M] drivers/usb/misc/sisusbvga/sisusb_con.o
>
> ########################################################################################
>
> help me please
Hi,
assuming you do not need it, could you try and disable the option:
CONFIG_UNISYSSPAR
?
Regards.
--
Gilles.
https://click-hack.org
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error
2016-02-03 6:45 [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error 박재홍
2016-02-03 7:33 ` Gilles Chanteperdrix
@ 2016-02-03 7:41 ` Gilles Chanteperdrix
2016-02-04 6:55 ` Gilles Chanteperdrix
1 sibling, 1 reply; 4+ messages in thread
From: Gilles Chanteperdrix @ 2016-02-03 7:41 UTC (permalink / raw)
To: 박재홍; +Cc: xenomai
On Wed, Feb 03, 2016 at 03:45:05PM +0900, 박재홍 wrote:
> hello
>
> after ipipe patched, build error
>
>
> # cd linux-3.18.20
>
> # ../xenomai-3.0.1/scripts/prepare-kernel.sh --arch=x86_64 --ipipe=../ipipe-core-3.18.20-x86-4.patch
>
> # make menuconfig
> -> "Power Management and ACPI options" -- "CPU Frequency scaling" -- "CPU Frequency scaling"
> -> "Power Management and ACPI options" -- "ACPI(~) Support" -- "Processor"
> -> "Power Management and ACPI options" -- "Cpuidle Driver for Intel Processors"
> -> "Power Management and ACPI options" -- "CPU idle PM Support"
> -> "Bus options(PCI etc.)" -- "Message Signaled Interrupts (MSI and MSI-X)"
Enabling MSI/MSI-X is recommended, as it helps avoiding irqs lines
to be shared between real-time and non real-time drivers.
--
Gilles.
https://click-hack.org
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error
2016-02-03 7:41 ` Gilles Chanteperdrix
@ 2016-02-04 6:55 ` Gilles Chanteperdrix
0 siblings, 0 replies; 4+ messages in thread
From: Gilles Chanteperdrix @ 2016-02-04 6:55 UTC (permalink / raw)
To: 박재홍; +Cc: xenomai
On Wed, Feb 03, 2016 at 08:41:50AM +0100, Gilles Chanteperdrix wrote:
> On Wed, Feb 03, 2016 at 03:45:05PM +0900, 박재홍 wrote:
> > hello
> >
> > after ipipe patched, build error
> >
> >
> > # cd linux-3.18.20
> >
> > # ../xenomai-3.0.1/scripts/prepare-kernel.sh --arch=x86_64 --ipipe=../ipipe-core-3.18.20-x86-4.patch
> >
> > # make menuconfig
> > -> "Power Management and ACPI options" -- "CPU Frequency scaling" -- "CPU Frequency scaling"
> > -> "Power Management and ACPI options" -- "ACPI(~) Support" -- "Processor"
> > -> "Power Management and ACPI options" -- "Cpuidle Driver for Intel Processors"
> > -> "Power Management and ACPI options" -- "CPU idle PM Support"
> > -> "Bus options(PCI etc.)" -- "Message Signaled Interrupts (MSI and MSI-X)"
>
> Enabling MSI/MSI-X is recommended, as it helps avoiding irqs lines
> to be shared between real-time and non real-time drivers.
If you are interesting in testing rapidly xenomai on an x86 machine,
you could try the live cd:
http://xenomai.org/~gch/xeno-live.iso
--
Gilles.
https://click-hack.org
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-04 6:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-03 6:45 [Xenomai] ubuntu15.04 - xenomai3.0.1 - kernel 3.18.20 - build error 박재홍
2016-02-03 7:33 ` Gilles Chanteperdrix
2016-02-03 7:41 ` Gilles Chanteperdrix
2016-02-04 6:55 ` Gilles Chanteperdrix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.