From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 00/10] mfd: axp20x: Add support for RSB based AXP223
Date: Fri, 12 Feb 2016 09:01:39 +0000 [thread overview]
Message-ID: <20160212090139.GO20693@x1> (raw)
In-Reply-To: <1455242567-17880-1-git-send-email-wens@csie.org>
On Fri, 12 Feb 2016, Chen-Yu Tsai wrote:
[...]
> Chen-Yu Tsai (10):
> mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings
> mfd: axp20x: Remove second struct device * parameter for
> axp20x_match_device()
> mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device()
> mfd: axp20x: Add missing copyright notice
> mfd: axp20x: Split the driver into core and i2c bits
> mfd: axp20x: Whitespace, open parenthesis alignment code style fixes
> mfd: axp20x: Add support for RSB based AXP223 PMIC
> regulator: axp20x: Support new AXP223 PMIC
> ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator
> nodes
> ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
>
> Documentation/devicetree/bindings/mfd/axp20x.txt | 7 +-
> arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 76 +++++++++++++++-
> arch/arm/boot/dts/sun8i-q8-common.dtsi | 83 +++++++++++++++++-
> drivers/mfd/Kconfig | 25 ++++--
> drivers/mfd/Makefile | 2 +
> drivers/mfd/axp20x-i2c.c | 104 ++++++++++++++++++++++
> drivers/mfd/axp20x-rsb.c | 80 +++++++++++++++++
> drivers/mfd/axp20x.c | 105 ++++++-----------------
> drivers/regulator/axp20x-regulator.c | 3 +
> include/linux/mfd/axp20x.h | 34 +++++++-
> 10 files changed, 425 insertions(+), 94 deletions(-)
> create mode 100644 drivers/mfd/axp20x-i2c.c
> create mode 100644 drivers/mfd/axp20x-rsb.c
Right, I've applied the MFD and Regulator patches and sent out the
required pull-request. You just need to have the arch/arm/ patches
taken care off and you're all set.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v8 00/10] mfd: axp20x: Add support for RSB based AXP223
Date: Fri, 12 Feb 2016 09:01:39 +0000 [thread overview]
Message-ID: <20160212090139.GO20693@x1> (raw)
In-Reply-To: <1455242567-17880-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
On Fri, 12 Feb 2016, Chen-Yu Tsai wrote:
[...]
> Chen-Yu Tsai (10):
> mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings
> mfd: axp20x: Remove second struct device * parameter for
> axp20x_match_device()
> mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device()
> mfd: axp20x: Add missing copyright notice
> mfd: axp20x: Split the driver into core and i2c bits
> mfd: axp20x: Whitespace, open parenthesis alignment code style fixes
> mfd: axp20x: Add support for RSB based AXP223 PMIC
> regulator: axp20x: Support new AXP223 PMIC
> ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator
> nodes
> ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
>
> Documentation/devicetree/bindings/mfd/axp20x.txt | 7 +-
> arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 76 +++++++++++++++-
> arch/arm/boot/dts/sun8i-q8-common.dtsi | 83 +++++++++++++++++-
> drivers/mfd/Kconfig | 25 ++++--
> drivers/mfd/Makefile | 2 +
> drivers/mfd/axp20x-i2c.c | 104 ++++++++++++++++++++++
> drivers/mfd/axp20x-rsb.c | 80 +++++++++++++++++
> drivers/mfd/axp20x.c | 105 ++++++-----------------
> drivers/regulator/axp20x-regulator.c | 3 +
> include/linux/mfd/axp20x.h | 34 +++++++-
> 10 files changed, 425 insertions(+), 94 deletions(-)
> create mode 100644 drivers/mfd/axp20x-i2c.c
> create mode 100644 drivers/mfd/axp20x-rsb.c
Right, I've applied the MFD and Regulator patches and sent out the
required pull-request. You just need to have the arch/arm/ patches
taken care off and you're all set.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v8 00/10] mfd: axp20x: Add support for RSB based AXP223
Date: Fri, 12 Feb 2016 09:01:39 +0000 [thread overview]
Message-ID: <20160212090139.GO20693@x1> (raw)
In-Reply-To: <1455242567-17880-1-git-send-email-wens@csie.org>
On Fri, 12 Feb 2016, Chen-Yu Tsai wrote:
[...]
> Chen-Yu Tsai (10):
> mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings
> mfd: axp20x: Remove second struct device * parameter for
> axp20x_match_device()
> mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device()
> mfd: axp20x: Add missing copyright notice
> mfd: axp20x: Split the driver into core and i2c bits
> mfd: axp20x: Whitespace, open parenthesis alignment code style fixes
> mfd: axp20x: Add support for RSB based AXP223 PMIC
> regulator: axp20x: Support new AXP223 PMIC
> ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator
> nodes
> ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
>
> Documentation/devicetree/bindings/mfd/axp20x.txt | 7 +-
> arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 76 +++++++++++++++-
> arch/arm/boot/dts/sun8i-q8-common.dtsi | 83 +++++++++++++++++-
> drivers/mfd/Kconfig | 25 ++++--
> drivers/mfd/Makefile | 2 +
> drivers/mfd/axp20x-i2c.c | 104 ++++++++++++++++++++++
> drivers/mfd/axp20x-rsb.c | 80 +++++++++++++++++
> drivers/mfd/axp20x.c | 105 ++++++-----------------
> drivers/regulator/axp20x-regulator.c | 3 +
> include/linux/mfd/axp20x.h | 34 +++++++-
> 10 files changed, 425 insertions(+), 94 deletions(-)
> create mode 100644 drivers/mfd/axp20x-i2c.c
> create mode 100644 drivers/mfd/axp20x-rsb.c
Right, I've applied the MFD and Regulator patches and sent out the
required pull-request. You just need to have the arch/arm/ patches
taken care off and you're all set.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-02-12 9:01 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-12 2:02 [PATCH v8 00/10] mfd: axp20x: Add support for RSB based AXP223 Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 01/10] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 02/10] mfd: axp20x: Remove second struct device * parameter for axp20x_match_device() Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 03/10] mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device() Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 04/10] mfd: axp20x: Add missing copyright notice Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 05/10] mfd: axp20x: Split the driver into core and i2c bits Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 06/10] mfd: axp20x: Whitespace, open parenthesis alignment code style fixes Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 07/10] mfd: axp20x: Add support for RSB based AXP223 PMIC Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 08/10] regulator: axp20x: Support new " Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 09/10] ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` [PATCH v8 10/10] ARM: dts: sun8i: q8-common: " Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 2:02 ` Chen-Yu Tsai
2016-02-12 9:00 ` [GIT PULL] Immutable branch between MFD and Regulator Lee Jones
2016-02-12 9:00 ` Lee Jones
2016-02-12 9:00 ` Lee Jones
2016-02-12 9:01 ` Lee Jones [this message]
2016-02-12 9:01 ` [PATCH v8 00/10] mfd: axp20x: Add support for RSB based AXP223 Lee Jones
2016-02-12 9:01 ` Lee Jones
2016-02-16 8:07 ` Maxime Ripard
2016-02-16 8:07 ` Maxime Ripard
2016-02-16 8:07 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160212090139.GO20693@x1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.