From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
To: "GEORGE, Laurent" <laurent.george@esiee.fr>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai] Problem with rt_igb driver for I210 card
Date: Mon, 15 Feb 2016 14:44:37 +0100 [thread overview]
Message-ID: <20160215134437.GE9903@hermes.click-hack.org> (raw)
In-Reply-To: <CAMgLWPk0iR9OgAWOm1EzyHvmGS2O2T98WAtR6YZQv4+HxgugnA@mail.gmail.com>
On Mon, Feb 15, 2016 at 02:37:23PM +0100, GEORGE, Laurent wrote:
> >"It does not work" is a bit vague. Do you wait for the link to be up
> >before sending the solicit? Does it return an error? Does it
> >send a packet but receive no answer? Some other case?
>
> Some precisions on the problem:
>
> 1) I load all the required modules (like rtnet, rt_igb, etc)- No error
> 2) I make the rteth0 interface up - No error
> 3) rtifconfig -a shows rteth0 interface - No error
> 4) I then run ./rtroute solicit ip_address dev rteth0 - No Error
> 5) I then check whether the device is solicited using ./rtroute - Error (It
> doesn't show that IP which I had just solicited - In normal Conditions, it
> shows when there is no error)
Ok, but on the other side, do you see the ARP packet, or not? If
yes, does the other side answer or not? Do the TX and RX packet
counters increase?
--
Gilles.
https://click-hack.org
next prev parent reply other threads:[~2016-02-15 13:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-15 12:48 [Xenomai] Problem with rt_igb driver for I210 card GEORGE, Laurent
2016-02-15 12:59 ` Gilles Chanteperdrix
2016-02-15 13:37 ` GEORGE, Laurent
2016-02-15 13:44 ` Gilles Chanteperdrix [this message]
2016-02-15 18:56 ` Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160215134437.GE9903@hermes.click-hack.org \
--to=gilles.chanteperdrix@xenomai.org \
--cc=laurent.george@esiee.fr \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.