[PATCH v2 2/2] ARM64: dts: add LS1043a-QDS board support

[shawnguo@kernel.org (Shawn Guo)]

On Thu, Dec 24, 2015 at 05:11:38PM +0800, Zhiqiang Hou wrote:
> From: Shaohui Xie <Shaohui.Xie@freescale.com>
> 

Empty commit log is generally not welcomed.  You can have something here
to introduce the board briefly.

We generally use lowercase for arm64 patch subject prefix, i.e.
"arm64: dts: ...".  Yes, this is different from ARM.

> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
> ---
> v2:
>  - add root node compatible property
> 
>  arch/arm64/boot/dts/freescale/Makefile            |   1 +
>  arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 168 ++++++++++++++++++++++
>  2 files changed, 169 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index f3c2516..1423fa4 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb

The list should be sorted alphabetically.  But it's not your fault, as
fsl-ls1043a-rdb.dtb is already wrong.

>   
>  always		:= $(dtb-y)
>  subdir-y	:= $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> new file mode 100644
> index 0000000..d7aae69
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
> @@ -0,0 +1,168 @@
> +/*
> + * Device Tree Include file for Freescale Layerscape-1043A family SoC.
> + *
> + * Copyright 2014-2015, Freescale Semiconductor
> + *
> + * Mingkai Hu <Mingkai.hu@freescale.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +/include/ "fsl-ls1043a.dtsi"
> +
> +/ {
> +	model = "LS1043A QDS Board";
> +	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
> +
> +	aliases {
> +		serial0 = &lpuart0;
> +		serial1 = &lpuart1;
> +		serial2 = &lpuart2;
> +		serial3 = &lpuart3;
> +		serial4 = &lpuart4;
> +		serial5 = &lpuart5;
> +

This new line is not really necessary.

> +		gpio0 = &gpio1;
> +		gpio1 = &gpio2;
> +		gpio2 = &gpio3;
> +		gpio3 = &gpio4;

I suggest to sort all these aliases entries alphabetically.

> +	};
> +};
> +
> +&i2c0 {
> +	status = "okay";

I suggest to have a new line between properties and sub-node.

> +	pca9547 at 77 {
> +		compatible = "philips,pca9547";

I cannot find this compatible string in either binding docs or driver
code.

> +		reg = <0x77>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		i2c at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0>;
> +
> +			rtc at 68 {
> +				compatible = "dallas,ds3232";
> +				reg = <0x68>;
> +				/* IRQ10_B */
> +				interrupts = <0 150 0x4>;
> +			};
> +		};
> +
> +		i2c at 2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x2>;
> +
> +			ina220 at 40 {
> +				compatible = "ti,ina220";
> +				reg = <0x40>;
> +				shunt-resistor = <1000>;
> +			};
> +
> +			ina220 at 41 {
> +				compatible = "ti,ina220";
> +				reg = <0x41>;
> +				shunt-resistor = <1000>;
> +			};
> +		};
> +
> +		i2c at 3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x3>;
> +
> +			eeprom at 56 {
> +				compatible = "at24,24c512";

Unsupported/undocumented compatible?

> +				reg = <0x56>;
> +			};
> +
> +			eeprom at 57 {
> +				compatible = "at24,24c512";
> +				reg = <0x57>;
> +			};
> +
> +			adt7461a at 4c {

temp-sensor should be a better node name, if I understand the device
correctly.

> +				compatible = "adt7461a";

It should be "adi,adt7461a" per
Documentation/devicetree/bindings/hwmon/lm90.txt?

> +				reg = <0x4c>;
> +			};
> +		};
> +	};
> +};
> +
> +&ifc {
> +	status = "okay";

We generally put it at the bottom of the property list.

> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +	/* NOR, NAND Flashes and FPGA on board */
> +	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
> +		  0x1 0x0 0x0 0x7e800000 0x00010000
> +		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
> +
> +	nor at 0,0 {
> +		compatible = "cfi-flash";
> +		reg = <0x0 0x0 0x8000000>;
> +		bank-width = <2>;
> +		device-width = <1>;
> +	};
> +
> +	nand at 1,0 {
> +		compatible = "fsl,ifc-nand";
> +		reg = <0x1 0x0 0x10000>;
> +	};
> +
> +	fpga: board-control at 2,0 {
> +		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
> +		reg = <0x2 0x0 0x0000100>;
> +	};
> +};
> +
> +&lpuart0 {
> +	status = "okay";
> +};
> +
> +&duart0 {
> +	status = "okay";
> +};
> +
> +&duart1 {
> +	status = "okay";
> +};

I suggest you sort these node alphabetically per label name.

Shawn

> -- 
> 2.1.0.27.g96db324
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>