Re: [PATCH 1/2] ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma

[Tony Lindgren <tony@atomide.com>]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [160202 06:28]:
> OMAP1 can not boot in DT mode and to be able to clean up the driver
> regarding to the dmaengine API use (switching to the new API) the
> device/slave -> filter mapping needs to be provided to the omap-dma driver.

Aaro, care to ack this one?

Regards,

Tony

> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  arch/arm/mach-omap1/dma.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
> index 7b02ed218a42..f6ba589cd312 100644
> --- a/arch/arm/mach-omap1/dma.c
> +++ b/arch/arm/mach-omap1/dma.c
> @@ -25,6 +25,7 @@
>  #include <linux/device.h>
>  #include <linux/io.h>
>  #include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
>  #include <linux/omap-dma.h>
>  #include <mach/tc.h>
>  
> @@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = {
>  	.num_res = 1,
>  };
>  
> +/* OMAP730, OMAP850 */
> +static const struct dma_slave_map omap7xx_sdma_map[] = {
> +	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
> +	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
> +	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
> +	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
> +	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
> +	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
> +	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
> +	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
> +	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
> +	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
> +	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
> +	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
> +};
> +
> +/* OMAP1510, OMAP1610*/
> +static const struct dma_slave_map omap1xxx_sdma_map[] = {
> +	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
> +	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
> +	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
> +	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
> +	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
> +	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
> +	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
> +	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
> +	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
> +	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
> +	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
> +	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
> +	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
> +	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
> +	{ "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
> +	{ "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
> +};
> +
>  static struct omap_system_dma_plat_info dma_plat_info __initdata = {
>  	.reg_map	= reg_map,
>  	.channel_stride	= 0x40,
> @@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void)
>  	p.dma_attr = d;
>  	p.errata = configure_dma_errata();
>  
> +	if (cpu_is_omap7xx()) {
> +		p.slave_map = omap7xx_sdma_map;
> +		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
> +	} else {
> +		p.slave_map = omap1xxx_sdma_map;
> +		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
> +	}
> +
>  	ret = platform_device_add_data(pdev, &p, sizeof(p));
>  	if (ret) {
>  		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
> -- 
> 2.7.0
>