From: michael@amarulasolutions.com (Michael Trimarchi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
Date: Sat, 20 Feb 2016 18:18:23 +0100 [thread overview]
Message-ID: <20160220171816.GA24064@panicking> (raw)
In-Reply-To: <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ@mail.gmail.com>
Hi Fabio
On Sat, Feb 20, 2016 at 12:02:51PM -0200, Fabio Estevam wrote:
> On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi
> <michael@amarulasolutions.com> wrote:
>
> > +
> > + flexcan1: can at 02090000 {
> > + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
> > + reg = <0x02090000 0x4000>;
> > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
> > + <&clks IMX6UL_CLK_CAN1_SERIAL>;
> > + clock-names = "ipg", "per";
> > + stop-mode = <&gpr 0x10 1 0x10 17>;
>
> This 'stop-mode' property is not handled in mainline, only in NXP
> kernel, so I suggest to drop this.
ok. Can you point me out to a driver in freescale source that use it?
Michael
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
WARNING: multiple messages have this Message-ID (diff)
From: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam
<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Brian Norris
<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: Re: [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
Date: Sat, 20 Feb 2016 18:18:23 +0100 [thread overview]
Message-ID: <20160220171816.GA24064@panicking> (raw)
In-Reply-To: <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Hi Fabio
On Sat, Feb 20, 2016 at 12:02:51PM -0200, Fabio Estevam wrote:
> On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi
> <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote:
>
> > +
> > + flexcan1: can@02090000 {
> > + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
> > + reg = <0x02090000 0x4000>;
> > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
> > + <&clks IMX6UL_CLK_CAN1_SERIAL>;
> > + clock-names = "ipg", "per";
> > + stop-mode = <&gpr 0x10 1 0x10 17>;
>
> This 'stop-mode' property is not handled in mainline, only in NXP
> kernel, so I suggest to drop this.
ok. Can you point me out to a driver in freescale source that use it?
Michael
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-20 17:18 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-20 10:20 [PATCH 0/4] Add support for Engicam IMX6UL module Michael Trimarchi
2016-02-20 10:20 ` Michael Trimarchi
2016-02-20 10:20 ` [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support Michael Trimarchi
2016-02-20 10:20 ` Michael Trimarchi
2016-02-20 14:02 ` Fabio Estevam
2016-02-20 14:02 ` Fabio Estevam
2016-02-20 17:18 ` Michael Trimarchi [this message]
2016-02-20 17:18 ` Michael Trimarchi
2016-02-20 17:29 ` Fabio Estevam
2016-02-20 17:29 ` Fabio Estevam
2016-02-21 11:18 ` [PATCH V2 " Michael Trimarchi
2016-02-21 11:18 ` Michael Trimarchi
2016-02-20 10:20 ` [PATCH 2/4] ARM: dts: imx6ul: Add LCDIF support Michael Trimarchi
2016-02-20 10:20 ` Michael Trimarchi
2016-02-20 10:20 ` [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support Michael Trimarchi
2016-02-20 10:20 ` Michael Trimarchi
2016-02-20 11:57 ` Fabio Estevam
2016-02-20 11:57 ` Fabio Estevam
2016-02-20 17:21 ` Michael Trimarchi
2016-02-20 17:21 ` Michael Trimarchi
2016-02-21 11:29 ` [PATCH V2 " Michael Trimarchi
2016-02-21 11:29 ` Michael Trimarchi
2016-02-22 8:26 ` Lothar Waßmann
2016-02-22 8:26 ` Lothar Waßmann
2016-03-20 8:44 ` Michael Trimarchi
2016-03-20 8:44 ` Michael Trimarchi
2016-03-21 9:47 ` Lothar Waßmann
2016-03-21 9:47 ` Lothar Waßmann
2016-03-22 7:44 ` Michael Trimarchi
2016-03-22 7:44 ` Michael Trimarchi
2016-02-20 10:20 ` [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support Michael Trimarchi
2016-02-20 10:20 ` Michael Trimarchi
2016-02-20 14:11 ` Fabio Estevam
2016-02-20 14:11 ` Fabio Estevam
2016-02-20 17:19 ` Michael Trimarchi
2016-02-20 17:19 ` Michael Trimarchi
2016-02-20 17:30 ` Fabio Estevam
2016-02-20 17:30 ` Fabio Estevam
2016-02-21 15:32 ` [PATCH V2 " Michael Trimarchi
2016-02-21 15:32 ` Michael Trimarchi
2016-03-30 11:47 ` [PATCH 0/4] Add support for Engicam IMX6UL module Shawn Guo
2016-03-30 11:47 ` Shawn Guo
2016-03-30 12:46 ` Michael Trimarchi
2016-03-30 12:46 ` Michael Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160220171816.GA24064@panicking \
--to=michael@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.