* arago build failed with errors
@ 2016-02-21 23:55 Mike Brainerd
2016-02-25 0:16 ` Denys Dmytriyenko
0 siblings, 1 reply; 2+ messages in thread
From: Mike Brainerd @ 2016-02-21 23:55 UTC (permalink / raw)
To: meta-arago@arago-project.org
[-- Attachment #1.1: Type: text/plain, Size: 2 bytes --]
[-- Attachment #1.2: Type: text/html, Size: 2815 bytes --]
[-- Attachment #2: error-tisdk-amsdk-08.00.00.00-config.txt --]
[-- Type: text/plain, Size: 32643 bytes --]
$ ./oe-layertool-setup.sh -f configs/amsdk/amsdk-08.00.00.00-config.txt
/home/mbrainerd/tisdk
cloning repo bitbake
Cloning into '/home/mbrainerd/tisdk/sources/bitbake'...
remote: Counting objects: 41124, done.
remote: Compressing objects: 100% (11705/11705), done.
remote: Total 41124 (delta 30364), reused 38178 (delta 27997)
Receiving objects: 100% (41124/41124), 8.62 MiB | 2.19 MiB/s, done.
Resolving deltas: 100% (30364/30364), done.
Checking connectivity... done.
Branch 1.22 set up to track remote branch 1.22 from origin.
Switched to a new branch '1.22'
Already up-to-date.
Note: checking out '8e386a710023e000a504e05c13da0106df0c7f3a'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 8e386a7... codeparser: Fix to better catch all getVar references
cloning repo meta-arago
Cloning into '/home/mbrainerd/tisdk/sources/meta-arago'...
remote: Counting objects: 19744, done.
remote: Compressing objects: 100% (10166/10166), done.
remote: Total 19744 (delta 14023), reused 13850 (delta 9105)
Receiving objects: 100% (19744/19744), 10.20 MiB | 3.21 MiB/s, done.
Resolving deltas: 100% (14023/14023), done.
Checking connectivity... done.
Branch amsdk-08.00.00.00-integration set up to track remote branch amsdk-08.00.00.00-integration from origin.
Switched to a new branch 'amsdk-08.00.00.00-integration'
Already up-to-date.
cloning repo meta-qt5
Cloning into '/home/mbrainerd/tisdk/sources/meta-qt5'...
remote: Counting objects: 6337, done.
remote: Compressing objects: 100% (127/127), done.
remote: Total 6337 (delta 80), reused 0 (delta 0), pack-reused 6210
Receiving objects: 100% (6337/6337), 1.80 MiB | 0 bytes/s, done.
Resolving deltas: 100% (3851/3851), done.
Checking connectivity... done.
Already on 'master'
Your branch is up-to-date with 'origin/master'.
Already up-to-date.
Note: checking out '37e921db22689131144b453d53a8cce4a314aa48'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 37e921d... qtwebengine: Include resources in main package and add rdep on qmlplugins
cloning repo meta-openembedded
Cloning into '/home/mbrainerd/tisdk/sources/meta-openembedded'...
remote: Counting objects: 57239, done.
remote: Compressing objects: 100% (20907/20907), done.
remote: Total 57239 (delta 34571), reused 56037 (delta 33606)
Receiving objects: 100% (57239/57239), 23.16 MiB | 3.49 MiB/s, done.
Resolving deltas: 100% (34571/34571), done.
Checking connectivity... done.
Branch daisy set up to track remote branch daisy from origin.
Switched to a new branch 'daisy'
Already up-to-date.
Note: checking out 'd3d14d3fcca7fcde362cf0b31411dc4eea6d20aa'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at d3d14d3... gdal: fix sqlite, expat and libtiff detection
cloning repo meta-ti
Cloning into '/home/mbrainerd/tisdk/sources/meta-ti'...
remote: Counting objects: 14823, done.
remote: Compressing objects: 100% (6936/6936), done.
remote: Total 14823 (delta 8511), reused 12954 (delta 7142)
Receiving objects: 100% (14823/14823), 7.14 MiB | 2.71 MiB/s, done.
Resolving deltas: 100% (8511/8511), done.
Checking connectivity... done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Branch amsdk-08.00.00.00-integration set up to track remote branch amsdk-08.00.00.00-integration from origin.
Switched to a new branch 'amsdk-08.00.00.00-integration'
Already up-to-date.
cloning repo meta-linaro
Cloning into '/home/mbrainerd/tisdk/sources/meta-linaro'...
remote: Counting objects: 7906, done.
remote: Compressing objects: 100% (3529/3529), done.
remote: Total 7906 (delta 4101), reused 7659 (delta 3932)
Receiving objects: 100% (7906/7906), 2.36 MiB | 0 bytes/s, done.
Resolving deltas: 100% (4101/4101), done.
Checking connectivity... done.
Branch daisy set up to track remote branch daisy from origin.
Switched to a new branch 'daisy'
Already up-to-date.
Note: checking out 'bc63e777ad2748b8bfa7fa70ffd74700fa21a567'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at bc63e77... bootwrapper: fix dependencies and compile flags
cloning repo oe-core
Cloning into '/home/mbrainerd/tisdk/sources/oe-core'...
remote: Counting objects: 242896, done.
remote: Compressing objects: 100% (65982/65982), done.
remote: Total 242896 (delta 173699), reused 240933 (delta 172180)
Receiving objects: 100% (242896/242896), 90.17 MiB | 2.85 MiB/s, done.
Resolving deltas: 100% (173699/173699), done.
Checking connectivity... done.
Branch daisy set up to track remote branch daisy from origin.
Switched to a new branch 'daisy'
Already up-to-date.
Note: checking out 'f34de2175f1d6a443f219b8ceaaf796cfbc6efd5'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at f34de21... beaglebone: enable the nowayout option for the watchdog
################################################################################
The bblayers.conf configuration file has been created for you with some
default values. Please verify the contents of your conf/bblayers.conf
file for correctness.
NOTE: Any additional entries to this file will be lost if the ./oe-layertool-setup.sh
script is run again. To add entries permanently to this file
please add them to the config file used and rerun the
./oe-layertool-setup.sh script.
################################################################################
The local.conf configuration file has been created for you with some
default values. Please verify the contents of your conf/local.conf
file for correctness.
By default the number of threads used by the build is set to the number
of CPUs found on your system.
NOTE: You will probably want to change the default MACHINE setting in the
local.conf file to the machine you are trying to build.
################################################################################
A setenv file has been created for you in the conf directory. Please verify
The contents of this file. Once you have verified the contents please source
this file to configure your environment for building:
. conf/setenv
You can then start building using the bitbake command. You will likely want
to set the MACHINE option if you have not done so in your local.conf file.
For example:
MACHINE=xxxxx bitbake <target>
Common targets are:
core-image-minimal
core-image-sato
meta-toolchain
meta-toolchain-sdk
adt-installer
meta-ide-support
$ cd build
$ la
total 4
drwxrwxr-x 2 mbrainerd mbrainerd 4096 Feb 21 17:26 conf
$ . conf/setenv
$ export PATH=$HOME/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin:$PATH
$ MACHINE=am335x-evm bitbake core-image-minimal
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x7facf08e54d0>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x7facf16e5450>)
IndexError: list index out of range
Parsing recipes: 100% |###################################################| Time: 00:00:41
Parsing of 1762 .bb files complete (0 cached, 1762 parsed). 2198 targets, 204 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.22.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "arm-oe-linux-gnueabi"
MACHINE = "am335x-evm"
DISTRO = "arago"
DISTRO_VERSION = "2015.02"
TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard cortexa8"
TARGET_FPU = "vfp-neon"
meta-arago-distro
meta-arago-extras = "amsdk-08.00.00.00-integration:2d15e7da62646c907d24942483cbfddc03a6310b"
meta-qt5 = "(detachedfrom37e921d):37e921db22689131144b453d53a8cce4a314aa48"
toolchain-layer
meta-networking
meta-ruby
meta-oe = "(detachedfromd3d14d3):d3d14d3fcca7fcde362cf0b31411dc4eea6d20aa"
meta-ti = "amsdk-08.00.00.00-integration:4fc5c40602d9a826661934a94a8a7e5e5864c88f"
meta-linaro-toolchain = "(detachedfrombc63e77):bc63e777ad2748b8bfa7fa70ffd74700fa21a567"
meta = "(detachedfromf34de21):f34de2175f1d6a443f219b8ceaaf796cfbc6efd5"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x7f7687924590>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x7f768a732b90>)
IndexError: list index out of range
WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.1.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.2.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/d/dpkg/dpkg_1.17.4.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://ftp.de.debian.org/debian/pool/main/m/mklibs/mklibs_0.1.38.tar.gz, attempting MIRRORS if available
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x7fc4976ae5d0>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x7fc49a33dbd0>)
IndexError: list index out of range
WARNING: The recipe external-linaro-toolchain is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/include/uapi/.install
Matched in manifest-am335x-evm-linux-libc-headers.populate_sysroot
Please verify which package should provide the above files.
ERROR: Function failed: do_compile (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.9233)
ERROR: Logfile of failure stored in: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.9233
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 -e MAKEFLAGS=
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -c -o example.o test/example.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o adler32.o adler32.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o crc32.o crc32.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o deflate.o deflate.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o infback.o infback.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o inffast.o inffast.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o inflate.o inflate.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o inftrees.o inftrees.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o trees.o trees.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o zutil.o zutil.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o compress.o compress.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o uncompr.o uncompr.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzclose.o gzclose.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzlib.o gzlib.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzread.o gzread.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzwrite.o gzwrite.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -c -o minigzip.o test/minigzip.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
| arm-linux-gnueabihf-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o example example.o -L. libz.a
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o minigzip minigzip.o -L. libz.a
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o example64 example64.o -L. libz.a
| arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o minigzip64 minigzip64.o -L. libz.a
| /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
| collect2: error: ld returned 1 exit status
| make: *** [example] Error 1
| make: *** Waiting for unfinished jobs....
| /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
| collect2: error: ld returned 1 exit status
| make: *** [minigzip] Error 1
| /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
| collect2: error: ld returned 1 exit status
| make: *** [example64] Error 1
| /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
| collect2: error: ld returned 1 exit status
| make: *** [minigzip64] Error 1
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.9233)
ERROR: Task 835 (/home/mbrainerd/tisdk/sources/oe-core/meta/recipes-core/zlib/zlib_1.2.8.bb, do_compile) failed with exit code '1'
ERROR: Function failed: do_configure (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/temp/log.do_configure.7237)
ERROR: Logfile of failure stored in: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/temp/log.do_configure.7237
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_copy_aclocals
| DEBUG: Python function autotools_copy_aclocals finished
| DEBUG: Executing shell function do_configure
| automake (GNU automake) 1.14
| Copyright (C) 2013 Free Software Foundation, Inc.
| License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
|
| Written by Tom Tromey <tromey@redhat.com>
| and Alexandre Duret-Lutz <adl@gnu.org>.
| AUTOV is 1
| NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/build/aclocal-copy/" autoreconf --verbose --install --force --exclude=libtoolize -I /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/
| autoreconf: Entering directory `.'
| autoreconf: configure.ac: not using Gettext
| autoreconf: running: aclocal --system-acdir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/build/aclocal-copy/ -I /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ -I /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force -I libltdl/m4
| autoreconf: configure.ac: tracing
| autoreconf: running: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf --include=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force
| autoreconf: running: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader --include=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force
| autoreconf: running: automake --foreign --add-missing --copy --force-missing
| parallel-tests: installing 'libltdl/config/test-driver'
| autoreconf: running: gnu-configize
| autoreconf: Leaving directory `.'
| NOTE: Running /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/configure --build=x86_64-linux --host=arm-oe-linux-gnueabi --target=arm-oe-linux-gnueabi --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib/libtool --datadir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/share/info --mandir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm
| configure: loading site script /home/mbrainerd/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
| configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/endian-little
| configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/arm-common
| configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/common-linux
| configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/common-glibc
| configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/arm-linux
| configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/common
| ## ------------------------- ##
| ## Configuring libtool 2.4.2 ##
| ## ------------------------- ##
|
| checking for a BSD-compatible install... /usr/bin/install -c
| checking whether build environment is sane... yes
| checking for arm-oe-linux-gnueabi-strip... arm-linux-gnueabihf-strip
| checking for a thread-safe mkdir -p... /bin/mkdir -p
| checking for gawk... gawk
| checking whether make sets $(MAKE)... yes
| checking whether make supports nested variables... yes
| checking build system type... x86_64-pc-linux-gnu
| checking host system type... arm-oe-linux-gnueabi
| configure: autobuild project... GNU Libtool
| configure: autobuild revision... 2.4.2 ()
| configure: autobuild hostname... oscar
| configure: autobuild mode... default
| configure: autobuild timestamp... 20160221T233606Z
| checking for arm-oe-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm
| checking whether the C compiler works... no
| configure: error: in `/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/build':
| configure: error: C compiler cannot create executables
| See `config.log' for more details
| Configure failed. The contents of all config.log files follows to aid debugging
| ERROR: oe_runconf failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/temp/log.do_configure.7237)
ERROR: Task 371 (/home/mbrainerd/tisdk/sources/oe-core/meta/recipes-devtools/libtool/libtool-cross_2.4.2.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 652 tasks of which 1 didn't need to be rerun and 2 failed.
Waiting for 0 running tasks to finish:
Summary: 2 tasks failed:
/home/mbrainerd/tisdk/sources/oe-core/meta/recipes-core/zlib/zlib_1.2.8.bb, do_compile
/home/mbrainerd/tisdk/sources/oe-core/meta/recipes-devtools/libtool/libtool-cross_2.4.2.bb, do_configure
Summary: There were 6 WARNING messages shown.
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
$
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: arago build failed with errors
2016-02-21 23:55 arago build failed with errors Mike Brainerd
@ 2016-02-25 0:16 ` Denys Dmytriyenko
0 siblings, 0 replies; 2+ messages in thread
From: Denys Dmytriyenko @ 2016-02-25 0:16 UTC (permalink / raw)
To: Mike Brainerd; +Cc: meta-arago@arago-project.org
IIRC, AMSDK 8 was Daisy based, so you'd need to use Linaro 2013.03 gcc-4.7
toolchain. Also, what is your Linux distro version?
--
Denys
On Sun, Feb 21, 2016 at 11:55:43PM +0000, Mike Brainerd wrote:
>
> $ ./oe-layertool-setup.sh -f configs/amsdk/amsdk-08.00.00.00-config.txt
> /home/mbrainerd/tisdk
>
>
> cloning repo bitbake
>
> Cloning into '/home/mbrainerd/tisdk/sources/bitbake'...
> remote: Counting objects: 41124, done.
> remote: Compressing objects: 100% (11705/11705), done.
> remote: Total 41124 (delta 30364), reused 38178 (delta 27997)
> Receiving objects: 100% (41124/41124), 8.62 MiB | 2.19 MiB/s, done.
> Resolving deltas: 100% (30364/30364), done.
> Checking connectivity... done.
> Branch 1.22 set up to track remote branch 1.22 from origin.
> Switched to a new branch '1.22'
> Already up-to-date.
> Note: checking out '8e386a710023e000a504e05c13da0106df0c7f3a'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. Example:
>
> git checkout -b new_branch_name
>
> HEAD is now at 8e386a7... codeparser: Fix to better catch all getVar references
>
>
> cloning repo meta-arago
>
> Cloning into '/home/mbrainerd/tisdk/sources/meta-arago'...
> remote: Counting objects: 19744, done.
> remote: Compressing objects: 100% (10166/10166), done.
> remote: Total 19744 (delta 14023), reused 13850 (delta 9105)
> Receiving objects: 100% (19744/19744), 10.20 MiB | 3.21 MiB/s, done.
> Resolving deltas: 100% (14023/14023), done.
> Checking connectivity... done.
> Branch amsdk-08.00.00.00-integration set up to track remote branch amsdk-08.00.00.00-integration from origin.
> Switched to a new branch 'amsdk-08.00.00.00-integration'
> Already up-to-date.
>
>
> cloning repo meta-qt5
>
> Cloning into '/home/mbrainerd/tisdk/sources/meta-qt5'...
> remote: Counting objects: 6337, done.
> remote: Compressing objects: 100% (127/127), done.
> remote: Total 6337 (delta 80), reused 0 (delta 0), pack-reused 6210
> Receiving objects: 100% (6337/6337), 1.80 MiB | 0 bytes/s, done.
> Resolving deltas: 100% (3851/3851), done.
> Checking connectivity... done.
> Already on 'master'
> Your branch is up-to-date with 'origin/master'.
> Already up-to-date.
> Note: checking out '37e921db22689131144b453d53a8cce4a314aa48'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. Example:
>
> git checkout -b new_branch_name
>
> HEAD is now at 37e921d... qtwebengine: Include resources in main package and add rdep on qmlplugins
>
>
> cloning repo meta-openembedded
>
> Cloning into '/home/mbrainerd/tisdk/sources/meta-openembedded'...
> remote: Counting objects: 57239, done.
> remote: Compressing objects: 100% (20907/20907), done.
> remote: Total 57239 (delta 34571), reused 56037 (delta 33606)
> Receiving objects: 100% (57239/57239), 23.16 MiB | 3.49 MiB/s, done.
> Resolving deltas: 100% (34571/34571), done.
> Checking connectivity... done.
> Branch daisy set up to track remote branch daisy from origin.
> Switched to a new branch 'daisy'
> Already up-to-date.
> Note: checking out 'd3d14d3fcca7fcde362cf0b31411dc4eea6d20aa'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. Example:
>
> git checkout -b new_branch_name
>
> HEAD is now at d3d14d3... gdal: fix sqlite, expat and libtiff detection
>
>
> cloning repo meta-ti
>
> Cloning into '/home/mbrainerd/tisdk/sources/meta-ti'...
> remote: Counting objects: 14823, done.
> remote: Compressing objects: 100% (6936/6936), done.
> remote: Total 14823 (delta 8511), reused 12954 (delta 7142)
> Receiving objects: 100% (14823/14823), 7.14 MiB | 2.71 MiB/s, done.
> Resolving deltas: 100% (8511/8511), done.
> Checking connectivity... done.
> warning: remote HEAD refers to nonexistent ref, unable to checkout.
>
> Branch amsdk-08.00.00.00-integration set up to track remote branch amsdk-08.00.00.00-integration from origin.
> Switched to a new branch 'amsdk-08.00.00.00-integration'
> Already up-to-date.
>
>
> cloning repo meta-linaro
>
> Cloning into '/home/mbrainerd/tisdk/sources/meta-linaro'...
> remote: Counting objects: 7906, done.
> remote: Compressing objects: 100% (3529/3529), done.
> remote: Total 7906 (delta 4101), reused 7659 (delta 3932)
> Receiving objects: 100% (7906/7906), 2.36 MiB | 0 bytes/s, done.
> Resolving deltas: 100% (4101/4101), done.
> Checking connectivity... done.
> Branch daisy set up to track remote branch daisy from origin.
> Switched to a new branch 'daisy'
> Already up-to-date.
> Note: checking out 'bc63e777ad2748b8bfa7fa70ffd74700fa21a567'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. Example:
>
> git checkout -b new_branch_name
>
> HEAD is now at bc63e77... bootwrapper: fix dependencies and compile flags
>
>
> cloning repo oe-core
>
> Cloning into '/home/mbrainerd/tisdk/sources/oe-core'...
> remote: Counting objects: 242896, done.
> remote: Compressing objects: 100% (65982/65982), done.
> remote: Total 242896 (delta 173699), reused 240933 (delta 172180)
> Receiving objects: 100% (242896/242896), 90.17 MiB | 2.85 MiB/s, done.
> Resolving deltas: 100% (173699/173699), done.
> Checking connectivity... done.
> Branch daisy set up to track remote branch daisy from origin.
> Switched to a new branch 'daisy'
> Already up-to-date.
> Note: checking out 'f34de2175f1d6a443f219b8ceaaf796cfbc6efd5'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. Example:
>
> git checkout -b new_branch_name
>
> HEAD is now at f34de21... beaglebone: enable the nowayout option for the watchdog
>
>
> ################################################################################
> The bblayers.conf configuration file has been created for you with some
> default values. Please verify the contents of your conf/bblayers.conf
> file for correctness.
>
> NOTE: Any additional entries to this file will be lost if the ./oe-layertool-setup.sh
> script is run again. To add entries permanently to this file
> please add them to the config file used and rerun the
> ./oe-layertool-setup.sh script.
>
>
>
> ################################################################################
> The local.conf configuration file has been created for you with some
> default values. Please verify the contents of your conf/local.conf
> file for correctness.
>
> By default the number of threads used by the build is set to the number
> of CPUs found on your system.
>
> NOTE: You will probably want to change the default MACHINE setting in the
> local.conf file to the machine you are trying to build.
>
>
>
> ################################################################################
> A setenv file has been created for you in the conf directory. Please verify
> The contents of this file. Once you have verified the contents please source
> this file to configure your environment for building:
>
> . conf/setenv
>
> You can then start building using the bitbake command. You will likely want
> to set the MACHINE option if you have not done so in your local.conf file.
>
> For example:
> MACHINE=xxxxx bitbake <target>
>
> Common targets are:
> core-image-minimal
> core-image-sato
> meta-toolchain
> meta-toolchain-sdk
> adt-installer
> meta-ide-support
> $ cd build
> $ la
> total 4
> drwxrwxr-x 2 mbrainerd mbrainerd 4096 Feb 21 17:26 conf
> $ . conf/setenv
> $ export PATH=$HOME/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin:$PATH
> $ MACHINE=am335x-evm bitbake core-image-minimal
> ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
> Traceback (most recent call last):
> File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x7facf08e54d0>)
> File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x7facf16e5450>)
> IndexError: list index out of range
>
> Parsing recipes: 100% |###################################################| Time: 00:00:41
> Parsing of 1762 .bb files complete (0 cached, 1762 parsed). 2198 targets, 204 skipped, 0 masked, 0 errors.
> NOTE: Resolving any missing task queue dependencies
>
> Build Configuration:
> BB_VERSION = "1.22.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-14.04"
> TARGET_SYS = "arm-oe-linux-gnueabi"
> MACHINE = "am335x-evm"
> DISTRO = "arago"
> DISTRO_VERSION = "2015.02"
> TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard cortexa8"
> TARGET_FPU = "vfp-neon"
> meta-arago-distro
> meta-arago-extras = "amsdk-08.00.00.00-integration:2d15e7da62646c907d24942483cbfddc03a6310b"
> meta-qt5 = "(detachedfrom37e921d):37e921db22689131144b453d53a8cce4a314aa48"
> toolchain-layer
> meta-networking
> meta-ruby
> meta-oe = "(detachedfromd3d14d3):d3d14d3fcca7fcde362cf0b31411dc4eea6d20aa"
> meta-ti = "amsdk-08.00.00.00-integration:4fc5c40602d9a826661934a94a8a7e5e5864c88f"
> meta-linaro-toolchain = "(detachedfrombc63e77):bc63e777ad2748b8bfa7fa70ffd74700fa21a567"
> meta = "(detachedfromf34de21):f34de2175f1d6a443f219b8ceaaf796cfbc6efd5"
>
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
> Traceback (most recent call last):
> File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x7f7687924590>)
> File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x7f768a732b90>)
> IndexError: list index out of range
>
> WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.1.tar.gz, attempting MIRRORS if available
> WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
> WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/n/netbase/netbase_5.2.tar.gz, attempting MIRRORS if available
> WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/d/dpkg/dpkg_1.17.4.tar.xz, attempting MIRRORS if available
> WARNING: Failed to fetch URL http://ftp.de.debian.org/debian/pool/main/m/mklibs/mklibs_0.1.38.tar.gz, attempting MIRRORS if available
> ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
> Traceback (most recent call last):
> File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x7fc4976ae5d0>)
> File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x7fc49a33dbd0>)
> IndexError: list index out of range
>
> WARNING: The recipe external-linaro-toolchain is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
> /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/include/uapi/.install
> Matched in manifest-am335x-evm-linux-libc-headers.populate_sysroot
> Please verify which package should provide the above files.
> ERROR: Function failed: do_compile (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.9233)
> ERROR: Logfile of failure stored in: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.9233
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 8 -e MAKEFLAGS=
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -c -o example.o test/example.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o adler32.o adler32.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o crc32.o crc32.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o deflate.o deflate.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o infback.o infback.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o inffast.o inffast.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o inflate.o inflate.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o inftrees.o inftrees.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o trees.o trees.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o zutil.o zutil.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o compress.o compress.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o uncompr.o uncompr.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzclose.o gzclose.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzlib.o gzlib.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzread.o gzread.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -c -o gzwrite.o gzwrite.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -c -o minigzip.o test/minigzip.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c
> | arm-linux-gnueabihf-ar rc libz.a adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o example example.o -L. libz.a
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o minigzip minigzip.o -L. libz.a
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o example64 example64.o -L. libz.a
> | arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm -isystem/home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/arm-linux-gnueabihf/include -fstack-protector -O2 -pipe -g -feliminate-unused-debug-types -o minigzip64 minigzip64.o -L. libz.a
> | /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
> | collect2: error: ld returned 1 exit status
> | make: *** [example] Error 1
> | make: *** Waiting for unfinished jobs....
> | /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
> | collect2: error: ld returned 1 exit status
> | make: *** [minigzip] Error 1
> | /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
> | collect2: error: ld returned 1 exit status
> | make: *** [example64] Error 1
> | /home/mbrainerd/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/4.9.3/../../../../arm-linux-gnueabihf/bin/ld: cannot find ../../lib/ld-linux-armhf.so.3
> | collect2: error: ld returned 1 exit status
> | make: *** [minigzip64] Error 1
> | ERROR: oe_runmake failed
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_compile (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.9233)
> ERROR: Task 835 (/home/mbrainerd/tisdk/sources/oe-core/meta/recipes-core/zlib/zlib_1.2.8.bb, do_compile) failed with exit code '1'
> ERROR: Function failed: do_configure (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/temp/log.do_configure.7237)
> ERROR: Logfile of failure stored in: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/temp/log.do_configure.7237
> Log data follows:
> | DEBUG: Executing python function sysroot_cleansstate
> | DEBUG: Python function sysroot_cleansstate finished
> | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
> | DEBUG: Executing shell function autotools_preconfigure
> | DEBUG: Shell function autotools_preconfigure finished
> | DEBUG: Executing python function autotools_copy_aclocals
> | DEBUG: Python function autotools_copy_aclocals finished
> | DEBUG: Executing shell function do_configure
> | automake (GNU automake) 1.14
> | Copyright (C) 2013 Free Software Foundation, Inc.
> | License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
> | This is free software: you are free to change and redistribute it.
> | There is NO WARRANTY, to the extent permitted by law.
> |
> | Written by Tom Tromey <tromey@redhat.com>
> | and Alexandre Duret-Lutz <adl@gnu.org>.
> | AUTOV is 1
> | NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/build/aclocal-copy/" autoreconf --verbose --install --force --exclude=libtoolize -I /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/
> | autoreconf: Entering directory `.'
> | autoreconf: configure.ac: not using Gettext
> | autoreconf: running: aclocal --system-acdir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/build/aclocal-copy/ -I /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ -I /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force -I libltdl/m4
> | autoreconf: configure.ac: tracing
> | autoreconf: running: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoconf --include=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force
> | autoreconf: running: /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/autoheader --include=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force
> | autoreconf: running: automake --foreign --add-missing --copy --force-missing
> | parallel-tests: installing 'libltdl/config/test-driver'
> | autoreconf: running: gnu-configize
> | autoreconf: Leaving directory `.'
> | NOTE: Running /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/libtool-2.4.2/configure --build=x86_64-linux --host=arm-oe-linux-gnueabi --target=arm-oe-linux-gnueabi --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib/libtool --datadir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/share/info --mandir=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/
> sysroots/am335x-evm
> | configure: loading site script /home/mbrainerd/tisdk/sources/meta-openembedded/meta-oe/site/endian-little
> | configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/endian-little
> | configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/arm-common
> | configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/common-linux
> | configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/common-glibc
> | configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/arm-linux
> | configure: loading site script /home/mbrainerd/tisdk/sources/oe-core/meta/site/common
> | ## ------------------------- ##
> | ## Configuring libtool 2.4.2 ##
> | ## ------------------------- ##
> |
> | checking for a BSD-compatible install... /usr/bin/install -c
> | checking whether build environment is sane... yes
> | checking for arm-oe-linux-gnueabi-strip... arm-linux-gnueabihf-strip
> | checking for a thread-safe mkdir -p... /bin/mkdir -p
> | checking for gawk... gawk
> | checking whether make sets $(MAKE)... yes
> | checking whether make supports nested variables... yes
> | checking build system type... x86_64-pc-linux-gnu
> | checking host system type... arm-oe-linux-gnueabi
> | configure: autobuild project... GNU Libtool
> | configure: autobuild revision... 2.4.2 ()
> | configure: autobuild hostname... oscar
> | configure: autobuild mode... default
> | configure: autobuild timestamp... 20160221T233606Z
> | checking for arm-oe-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a8 --sysroot=/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am335x-evm
> | checking whether the C compiler works... no
> | configure: error: in `/home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/build':
> | configure: error: C compiler cannot create executables
> | See `config.log' for more details
> | Configure failed. The contents of all config.log files follows to aid debugging
> | ERROR: oe_runconf failed
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_configure (log file is located at /home/mbrainerd/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa8t2hf-vfp-neon-oe-linux-gnueabi/libtool-cross/2.4.2-r6.1/temp/log.do_configure.7237)
> ERROR: Task 371 (/home/mbrainerd/tisdk/sources/oe-core/meta/recipes-devtools/libtool/libtool-cross_2.4.2.bb, do_configure) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 652 tasks of which 1 didn't need to be rerun and 2 failed.
> Waiting for 0 running tasks to finish:
>
> Summary: 2 tasks failed:
> /home/mbrainerd/tisdk/sources/oe-core/meta/recipes-core/zlib/zlib_1.2.8.bb, do_compile
> /home/mbrainerd/tisdk/sources/oe-core/meta/recipes-devtools/libtool/libtool-cross_2.4.2.bb, do_configure
> Summary: There were 6 WARNING messages shown.
> Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
> $
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-02-25 0:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-21 23:55 arago build failed with errors Mike Brainerd
2016-02-25 0:16 ` Denys Dmytriyenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.