[PATCH 3/5] EDAC, altera: Addition of Arria10 L2 Cache ECC

[bp@alien8.de (Borislav Petkov)]

On Tue, Mar 01, 2016 at 10:38:19AM -0600, tthayer at opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Addition of the Arria10 L2 Cache ECC handling. The major
> changes affect the L2 ECC registers not being grouped
> together. The Arria10 IRQ status needs to be mapped into
> a different region. The mapping occurs in the L2 specific
> function.
> Important changes include:

> 1) Move private data structure definition to altera_edac.h
> 2) Move Cyclone5 device defines to altera_edac.h

This should be a separate patch.

> 3) Split IRQ status and ECC enable/control into separate
>    memory areas.

Ditto.

> 4) Add IRQ status mapping in L2 ECC dependency checks
>    function.

Ditto...

> 5) Addition of register offsets in private data structure.
> 6) Changes to code to use register offset define.
> 7) Addition of Arria10 L2 cache private data.
> 8) Add IRQ flags to indicate Exclusive/Shared.

Do you see where I'm going with this?

Each patch should countain one logical change: add defines and move
struct, change functionality A, change functionality B, ...

The fact that you have to make a list of 8 important changes should
already give you a hint that it needs to be split.

As always, I'm going to need ACKs for the ARM stuff.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.