* Please add git tree @ 2016-03-07 3:06 Matthew Wilcox 2016-03-07 5:01 ` Philip Li 0 siblings, 1 reply; 6+ messages in thread From: Matthew Wilcox @ 2016-03-07 3:06 UTC (permalink / raw) To: lkp [-- Attachment #1: Type: text/plain, Size: 229 bytes --] Please add git://git.infradead.org/users/willy/linux-dax.git to the list of repos to test. The current branch I want tested is dax-pud-2015-03-05 but there will be other branches to test in the future. Thank you! ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please add git tree 2016-03-07 3:06 Please add git tree Matthew Wilcox @ 2016-03-07 5:01 ` Philip Li 2016-03-10 15:40 ` Matthew Wilcox 0 siblings, 1 reply; 6+ messages in thread From: Philip Li @ 2016-03-07 5:01 UTC (permalink / raw) To: lkp [-- Attachment #1: Type: text/plain, Size: 513 bytes --] On Sun, Mar 06, 2016 at 10:06:42PM -0500, Matthew Wilcox wrote: > > Please add > > git://git.infradead.org/users/willy/linux-dax.git sure, this is added, and build status will be notified. > > to the list of repos to test. The current branch I want tested is > dax-pud-2015-03-05 but there will be other branches to test in the future. > > Thank you! > > _______________________________________________ > LKP mailing list > LKP(a)lists.01.org > https://lists.01.org/mailman/listinfo/lkp ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please add git tree 2016-03-07 5:01 ` Philip Li @ 2016-03-10 15:40 ` Matthew Wilcox 2016-03-11 8:08 ` Philip Li 2016-03-11 8:54 ` Fengguang Wu 0 siblings, 2 replies; 6+ messages in thread From: Matthew Wilcox @ 2016-03-10 15:40 UTC (permalink / raw) To: lkp [-- Attachment #1: Type: text/plain, Size: 765 bytes --] On Mon, Mar 07, 2016 at 01:01:53PM +0800, Philip Li wrote: > On Sun, Mar 06, 2016 at 10:06:42PM -0500, Matthew Wilcox wrote: > > > > Please add > > > > git://git.infradead.org/users/willy/linux-dax.git > > sure, this is added, and build status will be notified. I found some build errors in this tree. Is it possible that 0day is failing to test some x86-32 configs? Combinations of Kconfig symbols that I want to see tested: 64BIT X86_PAE HIGHMEM HIGHMEM4G HIGHMEM64G NOHIGHMEM TRANSPARENT_HUGEPAGE DAX (some of these interact with each other in fun ways, so it's fewer than 2^8 different configs) Is there a way to see what configs were tested against a particular branch? I'd also like to know whether pSeries was tested. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please add git tree 2016-03-10 15:40 ` Matthew Wilcox @ 2016-03-11 8:08 ` Philip Li 2016-03-11 8:50 ` Fengguang Wu 2016-03-11 8:54 ` Fengguang Wu 1 sibling, 1 reply; 6+ messages in thread From: Philip Li @ 2016-03-11 8:08 UTC (permalink / raw) To: lkp [-- Attachment #1: Type: text/plain, Size: 1246 bytes --] On Thu, Mar 10, 2016 at 10:40:48AM -0500, Matthew Wilcox wrote: > On Mon, Mar 07, 2016 at 01:01:53PM +0800, Philip Li wrote: > > On Sun, Mar 06, 2016 at 10:06:42PM -0500, Matthew Wilcox wrote: > > > > > > Please add > > > > > > git://git.infradead.org/users/willy/linux-dax.git > > > > sure, this is added, and build status will be notified. > > I found some build errors in this tree. Is it possible that 0day is > failing to test some x86-32 configs? do you mean you receive 0day report, and it shows failure? > > Combinations of Kconfig symbols that I want to see tested: > > 64BIT > X86_PAE > HIGHMEM > HIGHMEM4G > HIGHMEM64G > NOHIGHMEM > TRANSPARENT_HUGEPAGE > DAX currently 0day will do a lot randconfig besides some standard one like allyes, allmodule. it will have possibility to cover the combination here. > > (some of these interact with each other in fun ways, so it's fewer than > 2^8 different configs) > > Is there a way to see what configs were tested against a particular > branch? I'd also like to know whether pSeries was tested. > usually for a build notification mail, 0day will list all the configs tested again which commit/branch. and what is pSeries here? thanks ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please add git tree 2016-03-11 8:08 ` Philip Li @ 2016-03-11 8:50 ` Fengguang Wu 0 siblings, 0 replies; 6+ messages in thread From: Fengguang Wu @ 2016-03-11 8:50 UTC (permalink / raw) To: lkp [-- Attachment #1: Type: text/plain, Size: 1711 bytes --] Hi Philip, It looks the dax tree is not tested at all: wfg(a)inn /kbuild-tests/build-complete% ll dax* ls: cannot access dax*: No such file or directory Thanks, Fengguang On Fri, Mar 11, 2016 at 04:08:08PM +0800, Philip Li wrote: > On Thu, Mar 10, 2016 at 10:40:48AM -0500, Matthew Wilcox wrote: > > On Mon, Mar 07, 2016 at 01:01:53PM +0800, Philip Li wrote: > > > On Sun, Mar 06, 2016 at 10:06:42PM -0500, Matthew Wilcox wrote: > > > > > > > > Please add > > > > > > > > git://git.infradead.org/users/willy/linux-dax.git > > > > > > sure, this is added, and build status will be notified. > > > > I found some build errors in this tree. Is it possible that 0day is > > failing to test some x86-32 configs? > do you mean you receive 0day report, and it shows failure? > > > > > Combinations of Kconfig symbols that I want to see tested: > > > > 64BIT > > X86_PAE > > HIGHMEM > > HIGHMEM4G > > HIGHMEM64G > > NOHIGHMEM > > TRANSPARENT_HUGEPAGE > > DAX > > currently 0day will do a lot randconfig besides some standard one like allyes, allmodule. > it will have possibility to cover the combination here. > > > > > (some of these interact with each other in fun ways, so it's fewer than > > 2^8 different configs) > > > > Is there a way to see what configs were tested against a particular > > branch? I'd also like to know whether pSeries was tested. > > > usually for a build notification mail, 0day will list all the configs tested again which commit/branch. > and what is pSeries here? > > thanks > > _______________________________________________ > LKP mailing list > LKP(a)lists.01.org > https://lists.01.org/mailman/listinfo/lkp ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Please add git tree 2016-03-10 15:40 ` Matthew Wilcox 2016-03-11 8:08 ` Philip Li @ 2016-03-11 8:54 ` Fengguang Wu 1 sibling, 0 replies; 6+ messages in thread From: Fengguang Wu @ 2016-03-11 8:54 UTC (permalink / raw) To: lkp [-- Attachment #1: Type: text/plain, Size: 286 bytes --] Hi Matthew, > Is there a way to see what configs were tested against a particular > branch? I'd also like to know whether pSeries was tested. The tested config names will show up in the below dir: http://bee.sh.intel.com/~lkp/build-complete/links/dax/ Thanks, Fengguang ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-03-11 8:54 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-03-07 3:06 Please add git tree Matthew Wilcox 2016-03-07 5:01 ` Philip Li 2016-03-10 15:40 ` Matthew Wilcox 2016-03-11 8:08 ` Philip Li 2016-03-11 8:50 ` Fengguang Wu 2016-03-11 8:54 ` Fengguang Wu
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.