[rtc-linux] Re: [PATCH v2] rtc: s3c: Document in binding that only s3c6410 needs a src clk

[Alexandre Belloni <alexandre.belloni@free-electrons.com>]

Hi Rob,

On 18/02/2016 at 08:38:53 -0600, Rob Herring wrote :
> On Mon, Feb 15, 2016 at 11:11:06AM -0300, Javier Martinez Canillas wrote:
> > The S3C binding doc says that the RTC and RTC source clocks are required
> > but the S3C driver supports different HW IP and only the s3c6410 needs a
> > source clock.
> > 
> > Fix the binding explaining that the source clock is only needed for the
> > s3c6410-rtc compatible controller.
> > 
> > Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > 
> > ---
> > Hello,
> > 
> > This patch depends on a previous one that was picked by Rob Herring so
> > this one has to go through his tree again and not through the RTC tree
> > to avoid conflicts.
> 
> Ugg, sent pull request today. It should be in Linus' tree now.
> 
> This can go thru rtc tree if you prefer. Otherwise, I'll queue it up for 
> 4.6.
> 

Do you plan to send that one to Linus for 4.6? Else, I still have a few
patches to send before the end of the merge window.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.