From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: Deepak M <m.deepak@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 2/6] drm/i915: split set pipeconf to pipeconf, pipemisc, pipe_gamma
Date: Fri, 18 Mar 2016 17:29:42 +0200 [thread overview]
Message-ID: <20160318152942.GI4329@intel.com> (raw)
In-Reply-To: <981252d5d5f82d009d73e1b2ae93d9ab7bee8de8.1458313400.git.jani.nikula@intel.com>
On Fri, Mar 18, 2016 at 05:05:40PM +0200, Jani Nikula wrote:
> Prep work for DSI transcoders. No functional changes.
>
> v2: call split functions at a higher level (Ville)
>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 32 ++++++++++++++++++++++----------
> 1 file changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index a356a0a78b82..eece50ed3ea6 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -102,6 +102,8 @@ static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
> struct intel_link_m_n *m2_n2);
> static void ironlake_set_pipeconf(struct drm_crtc *crtc);
> static void haswell_set_pipeconf(struct drm_crtc *crtc);
> +static void haswell_set_pipe_gamma(struct drm_crtc *crtc);
> +static void haswell_set_pipemisc(struct drm_crtc *crtc);
> static void intel_set_pipe_csc(struct drm_crtc *crtc);
> static void vlv_prepare_pll(struct intel_crtc *crtc,
> const struct intel_crtc_state *pipe_config);
> @@ -4928,6 +4930,8 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> }
>
> haswell_set_pipeconf(crtc);
> + haswell_set_pipe_gamma(crtc);
> + haswell_set_pipemisc(crtc);
>
> intel_set_pipe_csc(crtc);
>
> @@ -8764,16 +8768,12 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc)
>
> static void haswell_set_pipeconf(struct drm_crtc *crtc)
> {
> - struct drm_device *dev = crtc->dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_private *dev_priv = crtc->dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - enum pipe pipe = intel_crtc->pipe;
> enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
> - uint32_t val;
> + u32 val = 0;
>
> - val = 0;
> -
> - if (IS_HASWELL(dev) && intel_crtc->config->dither)
> + if (IS_HASWELL(dev_priv) && intel_crtc->config->dither)
> val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
>
> if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
> @@ -8783,12 +8783,24 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc)
>
> I915_WRITE(PIPECONF(cpu_transcoder), val);
> POSTING_READ(PIPECONF(cpu_transcoder));
> +}
> +
> +static void haswell_set_pipe_gamma(struct drm_crtc *crtc)
> +{
> + struct drm_i915_private *dev_priv = crtc->dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>
> I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
> POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
> +}
> +
> +static void haswell_set_pipemisc(struct drm_crtc *crtc)
As a followuo could perhaps name this broadwell_... and move the gen
check outside? Not sure it would be any nicer though.
Anyways, your way results in a more minimal patch which is nice for
this series.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> +{
> + struct drm_i915_private *dev_priv = crtc->dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>
> - if (IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
> - val = 0;
> + if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
> + u32 val = 0;
>
> switch (intel_crtc->config->pipe_bpp) {
> case 18:
> @@ -8811,7 +8823,7 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc)
> if (intel_crtc->config->dither)
> val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
>
> - I915_WRITE(PIPEMISC(pipe), val);
> + I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
> }
> }
>
> --
> 2.1.4
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-03-18 15:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 15:05 [PATCH v2 0/6] drm/i915/bxt: add dsi transcoders Jani Nikula
2016-03-18 15:05 ` [PATCH v2 1/6] drm/i915: split get/set pipe timings to timings and src size Jani Nikula
2016-03-18 15:25 ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 2/6] drm/i915: split set pipeconf to pipeconf, pipemisc, pipe_gamma Jani Nikula
2016-03-18 15:29 ` Ville Syrjälä [this message]
2016-03-18 15:05 ` [PATCH v2 3/6] drm/i915: abstract get config for cpu transcoder Jani Nikula
2016-03-18 15:31 ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 4/6] drm/i915/bxt: add dsi transcoders Jani Nikula
2016-03-18 15:38 ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 5/6] drm/i915/dsi: use the BIT macro for clarity Jani Nikula
2016-03-18 15:38 ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 6/6] drm/i915/bxt: allow dsi on any pipe Jani Nikula
2016-03-18 15:39 ` Ville Syrjälä
2016-03-21 9:59 ` ✗ Fi.CI.BAT: failure for drm/i915/bxt: add dsi transcoders (rev2) Patchwork
2016-03-21 13:04 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160318152942.GI4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=m.deepak@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.