All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: Deepak M <m.deepak@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 3/6] drm/i915: abstract get config for cpu transcoder
Date: Fri, 18 Mar 2016 17:31:16 +0200	[thread overview]
Message-ID: <20160318153116.GJ4329@intel.com> (raw)
In-Reply-To: <c473a73d69dcd61584419d85ff7908a8717b0594.1458313400.git.jani.nikula@intel.com>

On Fri, Mar 18, 2016 at 05:05:41PM +0200, Jani Nikula wrote:
> Makes it neater to add the same for DSI transcoder. No functional
> changes.
> 
> v2: rename to hsw_get_transcoder_state and add a comment about grabbing
>     power reference (Ville)
> 
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 87 +++++++++++++++++++++---------------
>  1 file changed, 51 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index eece50ed3ea6..98d8b563b9a1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9910,6 +9910,53 @@ static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
>  	pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
>  }
>  
> +static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
> +				     struct intel_crtc_state *pipe_config,
> +				     unsigned long *power_domain_mask)
> +{
> +	struct drm_device *dev = crtc->base.dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	enum intel_display_power_domain power_domain;
> +	u32 tmp;
> +
> +	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
> +
> +	/*
> +	 * XXX: Do intel_display_power_get_if_enabled before reading this (for
> +	 * consistency and less surprising code; it's in always on power).
> +	 */
> +	tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
> +	if (tmp & TRANS_DDI_FUNC_ENABLE) {
> +		enum pipe trans_edp_pipe;
> +		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
> +		default:
> +			WARN(1, "unknown pipe linked to edp transcoder\n");
> +		case TRANS_DDI_EDP_INPUT_A_ONOFF:
> +		case TRANS_DDI_EDP_INPUT_A_ON:
> +			trans_edp_pipe = PIPE_A;
> +			break;
> +		case TRANS_DDI_EDP_INPUT_B_ONOFF:
> +			trans_edp_pipe = PIPE_B;
> +			break;
> +		case TRANS_DDI_EDP_INPUT_C_ONOFF:
> +			trans_edp_pipe = PIPE_C;
> +			break;
> +		}
> +
> +		if (trans_edp_pipe == crtc->pipe)
> +			pipe_config->cpu_transcoder = TRANSCODER_EDP;
> +	}
> +
> +	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
> +	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> +		return false;
> +	*power_domain_mask |= BIT(power_domain);
> +
> +	tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
> +
> +	return tmp & PIPECONF_ENABLE;
> +}
> +
>  static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
>  				       struct intel_crtc_state *pipe_config)
>  {
> @@ -9960,48 +10007,18 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	enum intel_display_power_domain power_domain;
>  	unsigned long power_domain_mask;
> -	uint32_t tmp;
> -	bool ret;
> +	bool active;
>  
>  	power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
>  	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
>  		return false;
>  	power_domain_mask = BIT(power_domain);
>  
> -	ret = false;
> -
> -	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
>  	pipe_config->shared_dpll = NULL;
>  
> -	tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
> -	if (tmp & TRANS_DDI_FUNC_ENABLE) {
> -		enum pipe trans_edp_pipe;
> -		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
> -		default:
> -			WARN(1, "unknown pipe linked to edp transcoder\n");
> -		case TRANS_DDI_EDP_INPUT_A_ONOFF:
> -		case TRANS_DDI_EDP_INPUT_A_ON:
> -			trans_edp_pipe = PIPE_A;
> -			break;
> -		case TRANS_DDI_EDP_INPUT_B_ONOFF:
> -			trans_edp_pipe = PIPE_B;
> -			break;
> -		case TRANS_DDI_EDP_INPUT_C_ONOFF:
> -			trans_edp_pipe = PIPE_C;
> -			break;
> -		}
> -
> -		if (trans_edp_pipe == crtc->pipe)
> -			pipe_config->cpu_transcoder = TRANSCODER_EDP;
> -	}
> +	active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_mask);
>  
> -	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
> -	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> -		goto out;
> -	power_domain_mask |= BIT(power_domain);
> -
> -	tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
> -	if (!(tmp & PIPECONF_ENABLE))
> +	if (!active)
>  		goto out;
>  
>  	haswell_get_ddi_port_state(crtc, pipe_config);
> @@ -10038,13 +10055,11 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>  		pipe_config->pixel_multiplier = 1;
>  	}
>  
> -	ret = true;
> -
>  out:
>  	for_each_power_domain(power_domain, power_domain_mask)
>  		intel_display_power_put(dev_priv, power_domain);
>  
> -	return ret;
> +	return active;
>  }
>  
>  static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
> -- 
> 2.1.4

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-03-18 15:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-18 15:05 [PATCH v2 0/6] drm/i915/bxt: add dsi transcoders Jani Nikula
2016-03-18 15:05 ` [PATCH v2 1/6] drm/i915: split get/set pipe timings to timings and src size Jani Nikula
2016-03-18 15:25   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 2/6] drm/i915: split set pipeconf to pipeconf, pipemisc, pipe_gamma Jani Nikula
2016-03-18 15:29   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 3/6] drm/i915: abstract get config for cpu transcoder Jani Nikula
2016-03-18 15:31   ` Ville Syrjälä [this message]
2016-03-18 15:05 ` [PATCH v2 4/6] drm/i915/bxt: add dsi transcoders Jani Nikula
2016-03-18 15:38   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 5/6] drm/i915/dsi: use the BIT macro for clarity Jani Nikula
2016-03-18 15:38   ` Ville Syrjälä
2016-03-18 15:05 ` [PATCH v2 6/6] drm/i915/bxt: allow dsi on any pipe Jani Nikula
2016-03-18 15:39   ` Ville Syrjälä
2016-03-21  9:59 ` ✗ Fi.CI.BAT: failure for drm/i915/bxt: add dsi transcoders (rev2) Patchwork
2016-03-21 13:04   ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160318153116.GJ4329@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=m.deepak@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.