From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7] ARM: dts: sun8i: Add leds and switches on Orangepi Plus boards
Date: Mon, 21 Mar 2016 08:59:30 +0100 [thread overview]
Message-ID: <20160321075930.GA30977@lukather> (raw)
In-Reply-To: <1458500102-11071-1-git-send-email-hdegoede@redhat.com>
Hi,
On Sun, Mar 20, 2016 at 07:55:02PM +0100, Hans de Goede wrote:
> From: Krzysztof Adamski <k@japko.eu>
>
> OrangePi Plus board has two leds - green ("pwr") and red ("status")
> and two switches ("sw4" and "sw2"). This patch describes them in
> devicetree.
>
> Signed-off-by: Krzysztof Adamski <k@japko.eu>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An earlier version has already been sent for 4.6, please base your
changes on top of this one.
And there's a bunch of things I didn't catch at that time :/
> ---
> Changes in v6 (hdegoede):
> -Merge leds and r_leds nodes into one
> -Fix led labels to be in <board>:<colour>:<role> form
> -Alphabetically sort the added nodes
> -Add support for sw2 (this is the small reset-like button)
> Changes in v7 (hdegoede):
> -Use PL3 / PL4 in the pinctrl node, not PL03 / PL04
> ---
> arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 63 ++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> index a680b1f..9d8c038 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> @@ -45,6 +45,7 @@
> #include "sunxi-common-regulators.dtsi"
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/sun4i-a10.h>
>
> / {
> @@ -59,6 +60,43 @@
> stdout-path = "serial0:115200n8";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + input-name = "sw4";
This is an undocumented (and apparently unused) property
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sw_r_opc>;
> +
> + sw2 at 0 {
You shouldn't have a unit-address here
> + label = "sw2";
> + linux,code = <BTN_1>;
> + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + sw4 at 0 {
Ditto.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160321/90d11ec6/attachment-0001.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Krzysztof Adamski <k@japko.eu>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v7] ARM: dts: sun8i: Add leds and switches on Orangepi Plus boards
Date: Mon, 21 Mar 2016 08:59:30 +0100 [thread overview]
Message-ID: <20160321075930.GA30977@lukather> (raw)
In-Reply-To: <1458500102-11071-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 2014 bytes --]
Hi,
On Sun, Mar 20, 2016 at 07:55:02PM +0100, Hans de Goede wrote:
> From: Krzysztof Adamski <k@japko.eu>
>
> OrangePi Plus board has two leds - green ("pwr") and red ("status")
> and two switches ("sw4" and "sw2"). This patch describes them in
> devicetree.
>
> Signed-off-by: Krzysztof Adamski <k@japko.eu>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
An earlier version has already been sent for 4.6, please base your
changes on top of this one.
And there's a bunch of things I didn't catch at that time :/
> ---
> Changes in v6 (hdegoede):
> -Merge leds and r_leds nodes into one
> -Fix led labels to be in <board>:<colour>:<role> form
> -Alphabetically sort the added nodes
> -Add support for sw2 (this is the small reset-like button)
> Changes in v7 (hdegoede):
> -Use PL3 / PL4 in the pinctrl node, not PL03 / PL04
> ---
> arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 63 ++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> index a680b1f..9d8c038 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
> @@ -45,6 +45,7 @@
> #include "sunxi-common-regulators.dtsi"
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/sun4i-a10.h>
>
> / {
> @@ -59,6 +60,43 @@
> stdout-path = "serial0:115200n8";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + input-name = "sw4";
This is an undocumented (and apparently unused) property
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sw_r_opc>;
> +
> + sw2@0 {
You shouldn't have a unit-address here
> + label = "sw2";
> + linux,code = <BTN_1>;
> + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + sw4@0 {
Ditto.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-03-21 7:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-20 18:55 [PATCH v7] ARM: dts: sun8i: Add leds and switches on Orangepi Plus boards Hans de Goede
2016-03-20 18:55 ` Hans de Goede
2016-03-21 7:59 ` Maxime Ripard [this message]
2016-03-21 7:59 ` Maxime Ripard
2016-03-21 11:57 ` [linux-sunxi] " Hans de Goede
2016-03-21 11:57 ` Hans de Goede
2016-03-21 22:16 ` Hans de Goede
2016-03-21 22:16 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160321075930.GA30977@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.