From: Pavel Machek <pavel@ucw.cz>
To: Tony Lindgren <tony@atomide.com>
Cc: pali.rohar@gmail.com, sre@kernel.org,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
patrikbachan@gmail.com, serge@hallyn.com
Subject: Re: N900 sleep mode (in 4.5-rc0, if that matters)
Date: Wed, 23 Mar 2016 15:37:11 +0100 [thread overview]
Message-ID: <20160323143711.GA5459@amd> (raw)
In-Reply-To: <20160211010818.GQ19432@atomide.com>
On Wed 2016-02-10 17:08:18, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [160209 09:26]:
> > * Pavel Machek <pavel@ucw.cz> [160207 13:24]:
> >
> > > ffdffebd 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200042
> > > 0000000d 48004a28 (fa004a28) cm_idlest3_core
> >
> > Bit 21 in cm_idlest1_core is for MCSPI4 so WLAN. Does that go
> > down if do sleep 5; cat /sys/kernel/debug/pm_debug/count ?
> >
> > If not, the're PM runtime missing or broken somewhere.
>
> Just tested n900 wlan here and it's working for me with Emil's
> patch from the "" thread and the PM runtime regression fix for
> hsmmc I posted earlier today. Looks like n900 is hitting off
> mode just fine with wlan0 configured.
Emil's patch, would that be:
commit fb724ed5c6175a2407b256d506c9e703c6bb62d4
Author: Emil Goode <emil.fsw@goode.io>
Date: Wed Feb 10 02:22:16 2016 +0100
wlcore: Fix regression in wlcore_set_partition()
The commit 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio")
introduced a
regression causing the wlcore to time out and go into
recovery. Reverting the
changes regarding write of the last partition size brings the
module back to
it's functional state.
Fixes: 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio")
?
Hsmmc regression, that's
Date: Wed, 10 Feb 2016 15:02:44 -0800
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Subject: [PATCH 1/7] mmc: omap_hsmmc: Fix PM regression with deferred probe for pm_runtime_reinit
? Aha, but the patch this regression fixes does not seem to be in 4.4,
so I should be fine unless I go to 4.5.
> It does not wake up to pings from outside from off mode though
> until the system wakes up.
Ok, I guess I'm trying to get it to sleep, first, then we can talk
about wakeup ;-).
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: N900 sleep mode (in 4.5-rc0, if that matters)
Date: Wed, 23 Mar 2016 15:37:11 +0100 [thread overview]
Message-ID: <20160323143711.GA5459@amd> (raw)
In-Reply-To: <20160211010818.GQ19432@atomide.com>
On Wed 2016-02-10 17:08:18, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [160209 09:26]:
> > * Pavel Machek <pavel@ucw.cz> [160207 13:24]:
> >
> > > ffdffebd 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200042
> > > 0000000d 48004a28 (fa004a28) cm_idlest3_core
> >
> > Bit 21 in cm_idlest1_core is for MCSPI4 so WLAN. Does that go
> > down if do sleep 5; cat /sys/kernel/debug/pm_debug/count ?
> >
> > If not, the're PM runtime missing or broken somewhere.
>
> Just tested n900 wlan here and it's working for me with Emil's
> patch from the "" thread and the PM runtime regression fix for
> hsmmc I posted earlier today. Looks like n900 is hitting off
> mode just fine with wlan0 configured.
Emil's patch, would that be:
commit fb724ed5c6175a2407b256d506c9e703c6bb62d4
Author: Emil Goode <emil.fsw@goode.io>
Date: Wed Feb 10 02:22:16 2016 +0100
wlcore: Fix regression in wlcore_set_partition()
The commit 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio")
introduced a
regression causing the wlcore to time out and go into
recovery. Reverting the
changes regarding write of the last partition size brings the
module back to
it's functional state.
Fixes: 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio")
?
Hsmmc regression, that's
Date: Wed, 10 Feb 2016 15:02:44 -0800
From: Tony Lindgren <tony@atomide.com>
To: linux-omap at vger.kernel.org
Subject: [PATCH 1/7] mmc: omap_hsmmc: Fix PM regression with deferred probe for pm_runtime_reinit
? Aha, but the patch this regression fixes does not seem to be in 4.4,
so I should be fine unless I go to 4.5.
> It does not wake up to pings from outside from off mode though
> until the system wakes up.
Ok, I guess I'm trying to get it to sleep, first, then we can talk
about wakeup ;-).
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2016-03-23 14:37 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-23 12:10 N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek
2016-01-23 12:10 ` Pavel Machek
2016-01-25 16:33 ` Tony Lindgren
2016-01-25 16:33 ` Tony Lindgren
2016-01-25 22:23 ` Pavel Machek
2016-01-25 22:23 ` Pavel Machek
2016-01-25 22:50 ` Tony Lindgren
2016-01-25 22:50 ` Tony Lindgren
2016-01-26 14:00 ` Pavel Machek
2016-01-26 14:00 ` Pavel Machek
2016-01-26 17:25 ` Tony Lindgren
2016-01-26 17:25 ` Tony Lindgren
2016-01-26 22:51 ` Tony Lindgren
2016-01-26 22:51 ` Tony Lindgren
2016-01-30 20:02 ` Pavel Machek
2016-01-30 20:02 ` Pavel Machek
2016-01-30 20:14 ` Pavel Machek
2016-01-30 20:14 ` Pavel Machek
2016-01-30 22:15 ` Pavel Machek
2016-01-30 22:15 ` Pavel Machek
2016-02-01 18:13 ` Tony Lindgren
2016-02-01 18:13 ` Tony Lindgren
2016-02-01 21:17 ` Pavel Machek
2016-02-01 21:17 ` Pavel Machek
2016-02-01 22:11 ` Tony Lindgren
2016-02-01 22:11 ` Tony Lindgren
2016-02-04 5:35 ` Tony Lindgren
2016-02-04 5:35 ` Tony Lindgren
2016-02-07 21:37 ` Pavel Machek
2016-02-07 21:37 ` Pavel Machek
2016-02-07 21:37 ` Pavel Machek
2016-02-08 8:51 ` Pali Rohár
2016-02-08 8:51 ` Pali Rohár
2016-02-07 21:23 ` Pavel Machek
2016-02-07 21:23 ` Pavel Machek
2016-02-09 17:24 ` Tony Lindgren
2016-02-09 17:24 ` Tony Lindgren
2016-02-09 17:38 ` Tony Lindgren
2016-02-09 17:38 ` Tony Lindgren
2016-03-20 8:38 ` Pavel Machek
2016-03-20 8:38 ` Pavel Machek
2016-02-11 1:08 ` Tony Lindgren
2016-02-11 1:08 ` Tony Lindgren
2016-02-11 1:08 ` Tony Lindgren
2016-03-23 14:37 ` Pavel Machek [this message]
2016-03-23 14:37 ` Pavel Machek
2016-03-20 8:33 ` Pavel Machek
2016-03-20 8:33 ` Pavel Machek
2016-03-23 12:38 ` Pavel Machek
2016-03-23 12:38 ` Pavel Machek
2016-03-30 19:12 ` Tony Lindgren
2016-03-30 19:12 ` Tony Lindgren
2016-04-04 11:09 ` Pali Rohár
2016-04-04 11:09 ` Pali Rohár
2016-04-04 22:31 ` Tony Lindgren
2016-04-04 22:31 ` Tony Lindgren
2016-04-04 21:30 ` Pavel Machek
2016-04-04 21:30 ` Pavel Machek
2016-04-04 22:07 ` Tony Lindgren
2016-04-04 22:07 ` Tony Lindgren
2016-04-05 10:09 ` Pavel Machek
2016-04-05 10:09 ` Pavel Machek
2016-04-05 13:17 ` Pavel Machek
2016-04-05 13:17 ` Pavel Machek
2016-04-05 14:22 ` 4.4: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode) Pavel Machek
2016-04-05 14:22 ` Pavel Machek
2016-04-05 15:29 ` Tony Lindgren
2016-04-05 15:29 ` Tony Lindgren
2016-04-05 20:51 ` Pavel Machek
2016-04-05 20:51 ` Pavel Machek
2016-04-07 17:40 ` Tony Lindgren
2016-04-07 17:40 ` Tony Lindgren
2016-04-07 19:48 ` 4.4, 4.6: " Pavel Machek
2016-04-07 19:48 ` Pavel Machek
2016-04-07 21:32 ` Tony Lindgren
2016-04-07 21:32 ` Tony Lindgren
2016-04-07 23:01 ` Pavel Machek
2016-04-07 23:01 ` Pavel Machek
2016-04-07 23:41 ` Tony Lindgren
2016-04-07 23:41 ` Tony Lindgren
2016-04-08 9:19 ` Pavel Machek
2016-04-08 9:19 ` Pavel Machek
2016-04-11 8:27 ` 4.6-rc2: regression with omap video and lockdep (was Re: 4.4, 4.6: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode)) Pavel Machek
2016-04-11 8:27 ` Pavel Machek
2016-04-11 9:30 ` 4.4, 4.6: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode) Pavel Machek
2016-04-11 9:30 ` Pavel Machek
2016-04-11 9:41 ` Pavel Machek
2016-04-11 9:41 ` Pavel Machek
2016-04-11 21:10 ` Tony Lindgren
2016-04-11 21:10 ` Tony Lindgren
2016-04-12 12:16 ` Nokia N900 retention mode in v4.6, camera buttons fun Pavel Machek
2016-04-12 12:30 ` Pavel Machek
2016-04-12 12:30 ` Pavel Machek
2016-04-12 16:30 ` Tony Lindgren
2016-04-12 16:30 ` Tony Lindgren
2016-04-13 5:52 ` Tomi Valkeinen
2016-04-13 5:52 ` Tomi Valkeinen
2016-04-13 5:52 ` Tomi Valkeinen
2016-04-13 15:15 ` Tony Lindgren
2016-04-13 15:15 ` Tony Lindgren
2016-04-17 17:55 ` Pavel Machek
2016-04-17 17:55 ` Pavel Machek
2016-04-18 23:47 ` Tony Lindgren
2016-04-18 23:47 ` Tony Lindgren
2016-04-21 13:04 ` Pali Rohár
2016-04-21 13:04 ` Pali Rohár
2016-04-21 21:28 ` Pavel Machek
2016-04-21 21:28 ` Pavel Machek
2016-04-22 7:05 ` Pali Rohár
2016-04-22 7:05 ` Pali Rohár
2016-04-29 20:06 ` Sebastian Reichel
2016-04-29 20:06 ` Sebastian Reichel
2016-05-01 8:52 ` Pavel Machek
2016-05-01 8:52 ` Pavel Machek
2016-05-01 15:48 ` Sebastian Reichel
2016-05-01 15:48 ` Sebastian Reichel
2016-05-02 20:12 ` Sebastian Reichel
2016-05-02 20:12 ` Sebastian Reichel
2016-05-28 11:09 ` Pavel Machek
2016-05-28 11:09 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160323143711.GA5459@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=patrikbachan@gmail.com \
--cc=serge@hallyn.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.