[PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff
@ 2016-04-13  8:44 Marcin Niestroj
       [not found] ` <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
  0 siblings, 1 reply; 5+ messages in thread
From: Marcin Niestroj @ 2016-04-13  8:44 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA
  Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson,
	Tony Lindgren, Rob Herring, Pawel Moll, Marcin Niestroj

Hi,

These patches move board-specific device-tree nodes from ChiliSOM to
ChiliBoard dts files. These include uart and ethernet configuration.
Additionally add poweroff support for all ChiliSOM devices.

Developed and tested on ChiliBoard using v4.6-rc3.

Marcin Niestroj (3):
  ARM: dts: am335x-chili*: Move uart0 description from SOM to board
  ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to
    board
  ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC
    signal

 arch/arm/boot/dts/am335x-chiliboard.dts | 75 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am335x-chilisom.dtsi  | 76 +--------------------------------
 2 files changed, 77 insertions(+), 74 deletions(-)

-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 5+ messages in thread

[parent not found: <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>]

* [PATCH 1/3] ARM: dts: am335x-chili*: Move uart0 description from SOM to board
       [not found] ` <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
@ 2016-04-13  8:44   ` Marcin Niestroj
  2016-04-13  8:44   ` [PATCH 2/3] ARM: dts: am335x-chili*: Move Ethernet MAC " Marcin Niestroj
                     ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Marcin Niestroj @ 2016-04-13  8:44 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA
  Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson,
	Tony Lindgren, Rob Herring, Pawel Moll, Marcin Niestroj

uart0 configuration code has been in SOM. However, it is possible to
use all (or none) of 6 uart's of AM335x processor present on ChiliSOM.

This fix moves declaration of uart0 from ChiliSOM to ChiliBoard, because
use of uart is strictly board-specific.

Signed-off-by: Marcin Niestroj <m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
---
 arch/arm/boot/dts/am335x-chiliboard.dts | 14 ++++++++++++++
 arch/arm/boot/dts/am335x-chilisom.dtsi  | 14 --------------
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 15d47ab..4aae702 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -35,6 +35,13 @@
 };
 
 &am33xx_pinmux {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
@@ -61,6 +68,13 @@
 	};
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
 &ldo4_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 95461a2..986f96c 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -35,13 +35,6 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -109,13 +102,6 @@
 	};
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 2/3] ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board
       [not found] ` <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
  2016-04-13  8:44   ` [PATCH 1/3] ARM: dts: am335x-chili*: Move uart0 description from SOM to board Marcin Niestroj
@ 2016-04-13  8:44   ` Marcin Niestroj
  2016-04-13  8:44   ` [PATCH 3/3] ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal Marcin Niestroj
  2016-04-14 20:41   ` [PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff Tony Lindgren
  3 siblings, 0 replies; 5+ messages in thread
From: Marcin Niestroj @ 2016-04-13  8:44 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA
  Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson,
	Tony Lindgren, Rob Herring, Pawel Moll, Marcin Niestroj

ChiliSOM has 2 Ethernet subsystems with different types of possibly used
PHY interfaces (i.e. MII, RMII, GMII, RGMII). Current code configured
pinmux for RMII on 1st Ethernet subsystem and enabled Ethernet MAC with
1 slave for all boards which use ChiliSOM.

This change moves pinmux configuration of 1st Ethernet subsystem to
ChiliBoard description, as this is board-specific.

Signed-off-by: Marcin Niestroj <m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
---
 arch/arm/boot/dts/am335x-chiliboard.dts | 61 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am335x-chilisom.dtsi  | 62 ---------------------------------
 2 files changed, 61 insertions(+), 62 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 4aae702..2a624b3 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -42,6 +42,52 @@
 		>;
 	};
 
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
@@ -81,6 +127,21 @@
 };
 
 /* Ethernet */
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 986f96c..5276399 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -35,52 +35,6 @@
 		>;
 	};
 
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
 	nandflash_pins: nandflash_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
@@ -168,22 +122,6 @@
 	};
 };
 
-/* Ethernet MAC */
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
 /* NAND Flash */
 &elm {
 	status = "okay";
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 3/3] ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal
       [not found] ` <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
  2016-04-13  8:44   ` [PATCH 1/3] ARM: dts: am335x-chili*: Move uart0 description from SOM to board Marcin Niestroj
  2016-04-13  8:44   ` [PATCH 2/3] ARM: dts: am335x-chili*: Move Ethernet MAC " Marcin Niestroj
@ 2016-04-13  8:44   ` Marcin Niestroj
  2016-04-14 20:41   ` [PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff Tony Lindgren
  3 siblings, 0 replies; 5+ messages in thread
From: Marcin Niestroj @ 2016-04-13  8:44 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA
  Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson,
	Tony Lindgren, Rob Herring, Pawel Moll, Marcin Niestroj

ChiliSOM has TPS65217's PWR_EN pin connected to AM335x PMIC_POWER_EN
pin. Processor's PMIC_POWER_EN is controlled by it's internal RTC, hence
RTC subsystem is responsible for proper board poweroff sequence.

This change enables complete poweroff sequence for ChiliBoard, switching
PMIC's state from ACTIVE to SLEEP.

Signed-off-by: Marcin Niestroj <m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
---
 arch/arm/boot/dts/am335x-chilisom.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 5276399..bc0880d 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -122,6 +122,10 @@
 	};
 };
 
+&rtc {
+	system-power-controller;
+};
+
 /* NAND Flash */
 &elm {
 	status = "okay";
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff
       [not found] ` <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
                     ` (2 preceding siblings ...)
  2016-04-13  8:44   ` [PATCH 3/3] ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal Marcin Niestroj
@ 2016-04-14 20:41   ` Tony Lindgren
  3 siblings, 0 replies; 5+ messages in thread
From: Tony Lindgren @ 2016-04-14 20:41 UTC (permalink / raw)
  To: Marcin Niestroj
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-omap-u79uwXL29TY76Z2rM5mHXA, Benoît Cousson,
	Rob Herring, Pawel Moll

* Marcin Niestroj <m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org> [160413 01:45]:
> Hi,
> 
> These patches move board-specific device-tree nodes from ChiliSOM to
> ChiliBoard dts files. These include uart and ethernet configuration.
> Additionally add poweroff support for all ChiliSOM devices.
> 
> Developed and tested on ChiliBoard using v4.6-rc3.

Applying into omap-for-v4.7/dt thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2016-04-14 20:41 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-13  8:44 [PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff Marcin Niestroj
     [not found] ` <1460537057-23513-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
2016-04-13  8:44   ` [PATCH 1/3] ARM: dts: am335x-chili*: Move uart0 description from SOM to board Marcin Niestroj
2016-04-13  8:44   ` [PATCH 2/3] ARM: dts: am335x-chili*: Move Ethernet MAC " Marcin Niestroj
2016-04-13  8:44   ` [PATCH 3/3] ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal Marcin Niestroj
2016-04-14 20:41   ` [PATCH 0/3] ARM: dts: am335x-chili*: Move nodes to proper place and add poweroff Tony Lindgren

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.