* [PATCH v4 1/3] dmaengine: sun6i: Simplify lli setting
2016-04-02 9:49 [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers Jean-Francois Moine
@ 2016-04-02 9:24 ` Jean-Francois Moine
2016-04-04 21:13 ` Maxime Ripard
2016-04-02 9:27 ` [PATCH v4 2/3] dmaengine: sun6i: Set default maxburst size and bus width Jean-Francois Moine
` (2 subsequent siblings)
3 siblings, 1 reply; 7+ messages in thread
From: Jean-Francois Moine @ 2016-04-02 9:24 UTC (permalink / raw)
To: linux-arm-kernel
Checking the DMA config before setting the lli list avoids to do tests
inside the setting loop.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/dma/sun6i-dma.c | 102 ++++++++++++++++++++++--------------------------
1 file changed, 47 insertions(+), 55 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 3579ee7..b08245e 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -276,45 +276,6 @@ static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
return next;
}
-static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
- dma_addr_t src,
- dma_addr_t dst, u32 len,
- struct dma_slave_config *config)
-{
- s8 src_width, dst_width, src_burst, dst_burst;
-
- if (!config)
- return -EINVAL;
-
- src_burst = convert_burst(config->src_maxburst);
- if (src_burst < 0)
- return src_burst;
-
- dst_burst = convert_burst(config->dst_maxburst);
- if (dst_burst < 0)
- return dst_burst;
-
- src_width = convert_buswidth(config->src_addr_width);
- if (src_width < 0)
- return src_width;
-
- dst_width = convert_buswidth(config->dst_addr_width);
- if (dst_width < 0)
- return dst_width;
-
- lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
- DMA_CHAN_CFG_SRC_WIDTH(src_width) |
- DMA_CHAN_CFG_DST_BURST(dst_burst) |
- DMA_CHAN_CFG_DST_WIDTH(dst_width);
-
- lli->src = src;
- lli->dst = dst;
- lli->len = len;
- lli->para = NORMAL_WAIT;
-
- return 0;
-}
-
static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan,
struct sun6i_dma_lli *lli)
{
@@ -502,6 +463,35 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
return ret;
}
+static int set_config(struct sun6i_dma_dev *sdev,
+ struct dma_slave_config *sconfig,
+ enum dma_transfer_direction direction,
+ u32 *p_cfg)
+{
+ s8 src_width, dst_width, src_burst, dst_burst;
+
+ src_burst = convert_burst(sconfig->src_maxburst);
+ src_width = convert_buswidth(sconfig->src_addr_width);
+ dst_burst = convert_burst(sconfig->dst_maxburst);
+ dst_width = convert_buswidth(sconfig->dst_addr_width);
+
+ if (src_burst < 0)
+ return src_burst;
+ if (src_width < 0)
+ return src_width;
+ if (dst_burst < 0)
+ return dst_burst;
+ if (dst_width < 0)
+ return dst_width;
+
+ *p_cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
+ DMA_CHAN_CFG_SRC_WIDTH(src_width) |
+ DMA_CHAN_CFG_DST_BURST(dst_burst) |
+ DMA_CHAN_CFG_DST_WIDTH(dst_width);
+
+ return 0;
+}
+
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
@@ -569,6 +559,7 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
struct sun6i_desc *txd;
struct scatterlist *sg;
dma_addr_t p_lli;
+ u32 lli_cfg;
int i, ret;
if (!sgl)
@@ -579,6 +570,12 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
return NULL;
}
+ ret = set_config(sdev, sconfig, dir, &lli_cfg);
+ if (ret) {
+ dev_err(chan2dev(chan), "Invalid DMA configuration\n");
+ return NULL;
+ }
+
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (!txd)
return NULL;
@@ -588,14 +585,14 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
if (!v_lli)
goto err_lli_free;
- if (dir == DMA_MEM_TO_DEV) {
- ret = sun6i_dma_cfg_lli(v_lli, sg_dma_address(sg),
- sconfig->dst_addr, sg_dma_len(sg),
- sconfig);
- if (ret)
- goto err_cur_lli_free;
+ v_lli->len = sg_dma_len(sg);
+ v_lli->para = NORMAL_WAIT;
- v_lli->cfg |= DMA_CHAN_CFG_DST_IO_MODE |
+ if (dir == DMA_MEM_TO_DEV) {
+ v_lli->src = sg_dma_address(sg);
+ v_lli->dst = sconfig->dst_addr;
+ v_lli->cfg = lli_cfg |
+ DMA_CHAN_CFG_DST_IO_MODE |
DMA_CHAN_CFG_SRC_LINEAR_MODE |
DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_DRQ(vchan->port);
@@ -607,13 +604,10 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
sg_dma_len(sg), flags);
} else {
- ret = sun6i_dma_cfg_lli(v_lli, sconfig->src_addr,
- sg_dma_address(sg), sg_dma_len(sg),
- sconfig);
- if (ret)
- goto err_cur_lli_free;
-
- v_lli->cfg |= DMA_CHAN_CFG_DST_LINEAR_MODE |
+ v_lli->src = sconfig->src_addr;
+ v_lli->dst = sg_dma_address(sg);
+ v_lli->cfg = lli_cfg |
+ DMA_CHAN_CFG_DST_LINEAR_MODE |
DMA_CHAN_CFG_SRC_IO_MODE |
DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_SRC_DRQ(vchan->port);
@@ -634,8 +628,6 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
-err_cur_lli_free:
- dma_pool_free(sdev->pool, v_lli, p_lli);
err_lli_free:
for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
dma_pool_free(sdev->pool, prev, virt_to_phys(prev));
--
2.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 2/3] dmaengine: sun6i: Set default maxburst size and bus width
2016-04-02 9:49 [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers Jean-Francois Moine
2016-04-02 9:24 ` [PATCH v4 1/3] dmaengine: sun6i: Simplify lli setting Jean-Francois Moine
@ 2016-04-02 9:27 ` Jean-Francois Moine
2016-04-04 21:16 ` Maxime Ripard
2016-04-02 9:36 ` [PATCH v4 3/3] dmaengine: sun6i: Add cyclic capability Jean-Francois Moine
2016-04-19 15:26 ` [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers Vinod Koul
3 siblings, 1 reply; 7+ messages in thread
From: Jean-Francois Moine @ 2016-04-02 9:27 UTC (permalink / raw)
To: linux-arm-kernel
Some DMA clients, as audio, don't set the maxburst size and bus width
on the memory side when starting DMA transfers.
This patch prevents such transfers to be aborted by providing system
default values to the lacking ones.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/dma/sun6i-dma.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index b08245e..821fc4f 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -470,10 +470,25 @@ static int set_config(struct sun6i_dma_dev *sdev,
{
s8 src_width, dst_width, src_burst, dst_burst;
- src_burst = convert_burst(sconfig->src_maxburst);
- src_width = convert_buswidth(sconfig->src_addr_width);
- dst_burst = convert_burst(sconfig->dst_maxburst);
- dst_width = convert_buswidth(sconfig->dst_addr_width);
+ if (direction == DMA_MEM_TO_DEV) {
+ src_burst = convert_burst(sconfig->src_maxburst ?
+ sconfig->src_maxburst : 8);
+ src_width = convert_buswidth(sconfig->src_addr_width !=
+ DMA_SLAVE_BUSWIDTH_UNDEFINED ?
+ sconfig->src_addr_width :
+ DMA_SLAVE_BUSWIDTH_4_BYTES);
+ dst_burst = convert_burst(sconfig->dst_maxburst);
+ dst_width = convert_buswidth(sconfig->dst_addr_width);
+ } else { /* DMA_DEV_TO_MEM */
+ src_burst = convert_burst(sconfig->src_maxburst);
+ src_width = convert_buswidth(sconfig->src_addr_width);
+ dst_burst = convert_burst(sconfig->dst_maxburst ?
+ sconfig->dst_maxburst : 8);
+ dst_width = convert_buswidth(sconfig->dst_addr_width !=
+ DMA_SLAVE_BUSWIDTH_UNDEFINED ?
+ sconfig->dst_addr_width :
+ DMA_SLAVE_BUSWIDTH_4_BYTES);
+ }
if (src_burst < 0)
return src_burst;
--
2.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 3/3] dmaengine: sun6i: Add cyclic capability
2016-04-02 9:49 [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers Jean-Francois Moine
2016-04-02 9:24 ` [PATCH v4 1/3] dmaengine: sun6i: Simplify lli setting Jean-Francois Moine
2016-04-02 9:27 ` [PATCH v4 2/3] dmaengine: sun6i: Set default maxburst size and bus width Jean-Francois Moine
@ 2016-04-02 9:36 ` Jean-Francois Moine
2016-04-19 15:26 ` [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers Vinod Koul
3 siblings, 0 replies; 7+ messages in thread
From: Jean-Francois Moine @ 2016-04-02 9:36 UTC (permalink / raw)
To: linux-arm-kernel
DMA cyclic transfers are required by audio streaming.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
drivers/dma/sun6i-dma.c | 129 +++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 122 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 821fc4f..0c1ea8b 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -146,6 +146,8 @@ struct sun6i_vchan {
struct dma_slave_config cfg;
struct sun6i_pchan *phy;
u8 port;
+ u8 irq_type;
+ bool cyclic;
};
struct sun6i_dma_dev {
@@ -254,6 +256,30 @@ static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
return addr_width >> 1;
}
+static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
+{
+ struct sun6i_desc *txd = pchan->desc;
+ struct sun6i_dma_lli *lli;
+ size_t bytes;
+ dma_addr_t pos;
+
+ pos = readl(pchan->base + DMA_CHAN_LLI_ADDR);
+ bytes = readl(pchan->base + DMA_CHAN_CUR_CNT);
+
+ if (pos == LLI_LAST_ITEM)
+ return bytes;
+
+ for (lli = txd->v_lli; lli; lli = lli->v_lli_next) {
+ if (lli->p_lli_next == pos) {
+ for (lli = lli->v_lli_next; lli; lli = lli->v_lli_next)
+ bytes += lli->len;
+ break;
+ }
+ }
+
+ return bytes;
+}
+
static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
struct sun6i_dma_lli *next,
dma_addr_t next_phy,
@@ -342,8 +368,12 @@ static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
irq_reg = pchan->idx / DMA_IRQ_CHAN_NR;
irq_offset = pchan->idx % DMA_IRQ_CHAN_NR;
+ vchan->irq_type = vchan->cyclic ? DMA_IRQ_PKG : DMA_IRQ_QUEUE;
+
irq_val = readl(sdev->base + DMA_IRQ_EN(irq_reg));
- irq_val |= DMA_IRQ_QUEUE << (irq_offset * DMA_IRQ_CHAN_WIDTH);
+ irq_val &= ~((DMA_IRQ_HALF | DMA_IRQ_PKG | DMA_IRQ_QUEUE) <<
+ (irq_offset * DMA_IRQ_CHAN_WIDTH));
+ irq_val |= vchan->irq_type << (irq_offset * DMA_IRQ_CHAN_WIDTH);
writel(irq_val, sdev->base + DMA_IRQ_EN(irq_reg));
writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR);
@@ -440,11 +470,12 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
writel(status, sdev->base + DMA_IRQ_STAT(i));
for (j = 0; (j < DMA_IRQ_CHAN_NR) && status; j++) {
- if (status & DMA_IRQ_QUEUE) {
- pchan = sdev->pchans + j;
- vchan = pchan->vchan;
-
- if (vchan) {
+ pchan = sdev->pchans + j;
+ vchan = pchan->vchan;
+ if (vchan && (status & vchan->irq_type)) {
+ if (vchan->cyclic) {
+ vchan_cyclic_callback(&pchan->desc->vd);
+ } else {
spin_lock(&vchan->vc.lock);
vchan_cookie_complete(&pchan->desc->vd);
pchan->done = pchan->desc;
@@ -650,6 +681,78 @@ err_lli_free:
return NULL;
}
+static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic(
+ struct dma_chan *chan,
+ dma_addr_t buf_addr,
+ size_t buf_len,
+ size_t period_len,
+ enum dma_transfer_direction dir,
+ unsigned long flags)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct dma_slave_config *sconfig = &vchan->cfg;
+ struct sun6i_dma_lli *v_lli, *prev = NULL;
+ struct sun6i_desc *txd;
+ dma_addr_t p_lli;
+ u32 lli_cfg;
+ unsigned int i, periods = buf_len / period_len;
+ int ret;
+
+ ret = set_config(sdev, sconfig, dir, &lli_cfg);
+ if (ret) {
+ dev_err(chan2dev(chan), "Invalid DMA configuration\n");
+ return NULL;
+ }
+
+ txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+ if (!txd)
+ return NULL;
+
+ for (i = 0; i < periods; i++){
+ v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+ if (!v_lli) {
+ dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
+ goto err_lli_free;
+ }
+
+ v_lli->len = period_len;
+ v_lli->para = NORMAL_WAIT;
+
+ if (dir == DMA_MEM_TO_DEV) {
+ v_lli->src = buf_addr + period_len * i;
+ v_lli->dst = sconfig->dst_addr;
+ v_lli->cfg = lli_cfg |
+ DMA_CHAN_CFG_DST_IO_MODE |
+ DMA_CHAN_CFG_SRC_LINEAR_MODE |
+ DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
+ DMA_CHAN_CFG_DST_DRQ(vchan->port);
+ } else {
+ v_lli->src = sconfig->src_addr;
+ v_lli->dst = buf_addr + period_len * i;
+ v_lli->cfg = lli_cfg |
+ DMA_CHAN_CFG_DST_LINEAR_MODE |
+ DMA_CHAN_CFG_SRC_IO_MODE |
+ DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
+ DMA_CHAN_CFG_SRC_DRQ(vchan->port);
+ }
+
+ prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
+ }
+
+ prev->p_lli_next = txd->p_lli; /* cyclic list */
+
+ vchan->cyclic = true;
+
+ return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
+
+err_lli_free:
+ for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
+ dma_pool_free(sdev->pool, prev, virt_to_phys(prev));
+ kfree(txd);
+ return NULL;
+}
+
static int sun6i_dma_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
@@ -719,6 +822,16 @@ static int sun6i_dma_terminate_all(struct dma_chan *chan)
spin_lock_irqsave(&vchan->vc.lock, flags);
+ if (vchan->cyclic) {
+ vchan->cyclic = false;
+ if (pchan && pchan->desc) {
+ struct virt_dma_desc *vd = &pchan->desc->vd;
+ struct virt_dma_chan *vc = &vchan->vc;
+
+ list_add_tail(&vd->node, &vc->desc_completed);
+ }
+ }
+
vchan_get_all_descriptors(&vchan->vc, &head);
if (pchan) {
@@ -766,7 +879,7 @@ static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan,
} else if (!pchan || !pchan->desc) {
bytes = 0;
} else {
- bytes = readl(pchan->base + DMA_CHAN_CUR_CNT);
+ bytes = sun6i_get_chan_size(pchan);
}
spin_unlock_irqrestore(&vchan->vc.lock, flags);
@@ -970,6 +1083,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask);
dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask);
dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask);
+ dma_cap_set(DMA_CYCLIC, sdc->slave.cap_mask);
INIT_LIST_HEAD(&sdc->slave.channels);
sdc->slave.device_free_chan_resources = sun6i_dma_free_chan_resources;
@@ -977,6 +1091,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
sdc->slave.device_issue_pending = sun6i_dma_issue_pending;
sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg;
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
+ sdc->slave.device_prep_dma_cyclic = sun6i_dma_prep_dma_cyclic;
sdc->slave.copy_align = DMAENGINE_ALIGN_4_BYTES;
sdc->slave.device_config = sun6i_dma_config;
sdc->slave.device_pause = sun6i_dma_pause;
--
2.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers
2016-04-02 9:49 [PATCH v4 0/3] dmaengine: sun6i: Upgrade for audio transfers Jean-Francois Moine
` (2 preceding siblings ...)
2016-04-02 9:36 ` [PATCH v4 3/3] dmaengine: sun6i: Add cyclic capability Jean-Francois Moine
@ 2016-04-19 15:26 ` Vinod Koul
3 siblings, 0 replies; 7+ messages in thread
From: Vinod Koul @ 2016-04-19 15:26 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Apr 02, 2016 at 11:49:13AM +0200, Jean-Francois Moine wrote:
> This patch series contains most of the required changes to
> the sun6i DMA driver for audio streaming (tested in
> a Allwinner H3 - Orange PI 2).
> It is based on the previous series 'dmaengine: sun6i: Fixes'
> (2016-03-18).
The series looks good but had one checkpatch error :(
I dont seem to have these fixes which explains why this fails for me. Can
you please resend the fixes one and rebase this and fix the checkpatch for
this and send me
Thanks
--
~Vinod
^ permalink raw reply [flat|nested] 7+ messages in thread