Re: fsl-community-bsp + meta-qt5

Re: fsl-community-bsp + meta-qt5

[Martin Jansa]

[-- Attachment #1: Type: text/plain, Size: 2403 bytes --]

On Thu, Apr 21, 2016 at 02:46:29AM +0000, ZHOU Yanxin wrote:
> Dear Martin,

Hi Zhou,

> I have built the cross toolchain for qt5 and the rootfs  using: bitbake meta-toolchain-qt5 and bitbake fsl-image-multimedia-full.
> Fsl-community-bsp and meta-qt5 both use Jethro branch.

Use ML for generic questions like this. I'm not actively using FSL

> Following are some of my questions:
> 
> 
> 1.       In the rootfs which I put in the "riotboard", is qt5 library already in it? Do I need to compile the source of qt5 and copy it to the board
> 
> Separately?

I don't know what fsl-image-multimedia-full image contains, but you
probably need to add it to the image like any other packages.

> 2.       I have set up the qtcreator: device, kit, qt version, compiler, debugger, also ssh connection, but when I run the application, qt says
> 
> "This application failed to start because it could not find or load the qt platform plugin xcb, available platform plugin are: eglfs, minimal, minimalegl, offscreen".

Have you tried to set the correct platform?

> 3.       In the Jethro branch of meta-qt5, the qtbase.inc is missing, correct? I found on the internet, that I can modify the PACKAGECONFIG[gles] value, add -qpa eglfs.

qtbase.inc was integrated into qtbase_git.bb.

> 4.       I also found that in the Jethro branch, the serialport is also missing, but in our application, we need this function to handle the serial keyboard.

Why you think it's missing? I see it there.

> Looking forward to your reply.
> 
> Best regards!
> 
> Yanxin ZHOU
> Electronic Product Engineering
> STAUBLI HANGZHOU LTD.
> No 123 Weiken Street Hangzhou Economic & Technological Development Zone
> 310018 Hangzhou / CN
> Phone: +86 40066 70066
> Mobile: +86 18605811677
> mailto: y.zhou@staubli.com<mailto:y.zhou@staubli.com>
> www.staubli.com<http://www.staubli.com>
> This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
> to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
> Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
> the intended recipient is strictly prohibited.

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 188 bytes --]