[PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Kedareswara rao Appana]

This patch series adds basic clock support for AXI DMAS
This patch series is created on top of the
"dmaengine: vdma: AXI DMA's enhancments" patch series.

Kedareswara rao Appana (3):
  dmaengine: vdma: Add config structure to differentiate dmas
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add clock support

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt |  15 +
 drivers/dma/xilinx/xilinx_vdma.c                   | 307 ++++++++++++++++++---
 2 files changed, 289 insertions(+), 33 deletions(-)

-- 
2.1.2

[PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Kedareswara rao Appana]

This patch series adds basic clock support for AXI DMAS
This patch series is created on top of the
"dmaengine: vdma: AXI DMA's enhancments" patch series.

Kedareswara rao Appana (3):
  dmaengine: vdma: Add config structure to differentiate dmas
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add clock support

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt |  15 +
 drivers/dma/xilinx/xilinx_vdma.c                   | 307 ++++++++++++++++++---
 2 files changed, 289 insertions(+), 33 deletions(-)

-- 
2.1.2

[PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Kedareswara rao Appana]

This patch series adds basic clock support for AXI DMAS
This patch series is created on top of the
"dmaengine: vdma: AXI DMA's enhancments" patch series.

Kedareswara rao Appana (3):
  dmaengine: vdma: Add config structure to differentiate dmas
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add clock support

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt |  15 +
 drivers/dma/xilinx/xilinx_vdma.c                   | 307 ++++++++++++++++++---
 2 files changed, 289 insertions(+), 33 deletions(-)

-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] dmaengine: vdma: Add config structure to differentiate dmas

[Kedareswara rao Appana]

This patch adds config structure in the driver to differentiate
AXI DMA's and to add more features(clock support etc..) to these DMA's.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> None.
Changes for v3:
---> New patch.

 drivers/dma/xilinx/xilinx_vdma.c | 83 ++++++++++++++++++++++++----------------
 1 file changed, 51 insertions(+), 32 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index 70caea6..255cdca 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -342,6 +342,10 @@ struct xilinx_dma_chan {
 	void (*start_transfer)(struct xilinx_dma_chan *chan);
 };
 
+struct dma_config {
+	enum xdma_ip_type dmatype;
+};
+
 /**
  * struct xilinx_dma_device - DMA device structure
  * @regs: I/O mapped base address
@@ -351,7 +355,7 @@ struct xilinx_dma_chan {
  * @has_sg: Specifies whether Scatter-Gather is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
- * @dmatype: DMA ip type
+ * @dma_config: DMA config structure
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -361,7 +365,7 @@ struct xilinx_dma_device {
 	bool has_sg;
 	u32 flush_on_fsync;
 	bool ext_addr;
-	enum xdma_ip_type dmatype;
+	const struct dma_config *dma_config;
 };
 
 /* Macros */
@@ -573,12 +577,12 @@ xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
 	if (!desc)
 		return;
 
-	if (chan->xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		list_for_each_entry_safe(segment, next, &desc->segments, node) {
 			list_del(&segment->node);
 			xilinx_vdma_free_tx_segment(chan, segment);
 		}
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		list_for_each_entry_safe(cdma_segment, cdma_next,
 					 &desc->segments, node) {
 			list_del(&cdma_segment->node);
@@ -641,7 +645,7 @@ static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
 	dev_dbg(chan->dev, "Free all channel resources.\n");
 
 	xilinx_dma_free_descriptors(chan);
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		xilinx_dma_free_tx_segment(chan, chan->seg_v);
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
@@ -711,13 +715,13 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 	 * We need the descriptor to be aligned to 64bytes
 	 * for meeting Xilinx VDMA specification requirement.
 	 */
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		chan->desc_pool = dma_pool_create("xilinx_dma_desc_pool",
 				   chan->dev,
 				   sizeof(struct xilinx_axidma_tx_segment),
 				   __alignof__(struct xilinx_axidma_tx_segment),
 				   0);
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
 				   chan->dev,
 				   sizeof(struct xilinx_cdma_tx_segment),
@@ -738,7 +742,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 		return -ENOMEM;
 	}
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		/*
 		 * For AXI DMA case after submitting a pending_list, keep
 		 * an extra segment allocated so that the "next descriptor"
@@ -751,7 +755,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 
 	dma_cookie_init(dchan);
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		/* For AXI DMA resetting once channel will reset the
 		 * other channel as well so enable the interrupts here.
 		 */
@@ -759,7 +763,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 			      XILINX_DMA_DMAXR_ALL_IRQ_MASK);
 	}
 
-	if ((chan->xdev->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
+	if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
 		dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
 			     XILINX_CDMA_CR_SGMODE);
 
@@ -790,7 +794,7 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 	if (ret == DMA_COMPLETE || !txstate)
 		return ret;
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		spin_lock_irqsave(&chan->lock, flags);
 
 		desc = list_last_entry(&chan->active_list,
@@ -1332,12 +1336,12 @@ static void append_desc_queue(struct xilinx_dma_chan *chan,
 	 */
 	tail_desc = list_last_entry(&chan->pending_list,
 				    struct xilinx_dma_tx_descriptor, node);
-	if (chan->xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		tail_segment = list_last_entry(&tail_desc->segments,
 					       struct xilinx_vdma_tx_segment,
 					       node);
 		tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		cdma_tail_segment = list_last_entry(&tail_desc->segments,
 						struct xilinx_cdma_tx_segment,
 						node);
@@ -1357,8 +1361,8 @@ append:
 	list_add_tail(&desc->node, &chan->pending_list);
 	chan->desc_pendingcount++;
 
-	if (chan->has_sg && (chan->xdev->dmatype == XDMA_TYPE_VDMA) &&
-	    unlikely(chan->desc_pendingcount > chan->num_frms)) {
+	if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
+	    && unlikely(chan->desc_pendingcount > chan->num_frms)) {
 		dev_dbg(chan->dev, "desc pendingcount is too high\n");
 		chan->desc_pendingcount = chan->num_frms;
 	}
@@ -1811,7 +1815,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		chan->id = 0;
 
 		chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
-		if (xdev->dmatype == XDMA_TYPE_VDMA) {
+		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 			chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
 
 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
@@ -1824,7 +1828,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		chan->id = 1;
 
 		chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
-		if (xdev->dmatype == XDMA_TYPE_VDMA) {
+		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 			chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
 
 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
@@ -1845,9 +1849,9 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		return err;
 	}
 
-	if (xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		chan->start_transfer = xilinx_dma_start_transfer;
-	else if (xdev->dmatype == XDMA_TYPE_CDMA)
+	else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
 		chan->start_transfer = xilinx_cdma_start_transfer;
 	else
 		chan->start_transfer = xilinx_vdma_start_transfer;
@@ -1894,13 +1898,22 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);
 }
 
+static const struct dma_config axidma_config = {
+	.dmatype = XDMA_TYPE_AXIDMA,
+};
+
+static const struct dma_config axicdma_config = {
+	.dmatype = XDMA_TYPE_CDMA,
+};
+
+static const struct dma_config axivdma_config = {
+	.dmatype = XDMA_TYPE_VDMA,
+};
+
 static const struct of_device_id xilinx_dma_of_ids[] = {
-	{ .compatible = "xlnx,axi-dma-1.00.a",
-	  .data = (void *)XDMA_TYPE_AXIDMA },
-	{ .compatible = "xlnx,axi-cdma-1.00.a",
-	  .data = (void *)XDMA_TYPE_CDMA },
-	{ .compatible = "xlnx,axi-vdma-1.00.a",
-	  .data = (void *)XDMA_TYPE_VDMA },
+	{ .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
+	{ .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
+	{ .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
 	{}
 };
 MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
@@ -1915,7 +1928,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	struct xilinx_dma_device *xdev;
-	struct device_node *child;
+	struct device_node *child, *np = pdev->dev.of_node;
 	struct resource *io;
 	u32 num_frames, addr_width;
 	int i, err;
@@ -1926,7 +1939,13 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	xdev->dev = &pdev->dev;
-	xdev->dmatype = (enum xdma_ip_type)of_device_get_match_data(&pdev->dev);
+	if (np) {
+		const struct of_device_id *match;
+
+		match = of_match_node(xilinx_dma_of_ids, np);
+		if (match && match->data)
+			xdev->dma_config = match->data;
+	}
 
 	/* Request and map I/O memory */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1937,7 +1956,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
 
-	if (xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		err = of_property_read_u32(node, "xlnx,num-fstores",
 					   &num_frames);
 		if (err < 0) {
@@ -1969,7 +1988,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&xdev->common.channels);
-	if (!(xdev->dmatype == XDMA_TYPE_CDMA)) {
+	if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
 		dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
 		dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
 	}
@@ -1981,12 +2000,12 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.device_terminate_all = xilinx_dma_terminate_all;
 	xdev->common.device_tx_status = xilinx_dma_tx_status;
 	xdev->common.device_issue_pending = xilinx_dma_issue_pending;
-	if (xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
 		/* Residue calculation is supported by only AXI DMA */
 		xdev->common.residue_granularity =
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
-	} else if (xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
 		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
 	} else {
@@ -2003,7 +2022,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 			goto error;
 	}
 
-	if (xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
 			if (xdev->chan[i])
 				xdev->chan[i]->num_frms = num_frames;
-- 
2.1.2

[PATCH v4 1/3] dmaengine: vdma: Add config structure to differentiate dmas

[Kedareswara rao Appana]

This patch adds config structure in the driver to differentiate
AXI DMA's and to add more features(clock support etc..) to these DMA's.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> None.
Changes for v3:
---> New patch.

 drivers/dma/xilinx/xilinx_vdma.c | 83 ++++++++++++++++++++++++----------------
 1 file changed, 51 insertions(+), 32 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index 70caea6..255cdca 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -342,6 +342,10 @@ struct xilinx_dma_chan {
 	void (*start_transfer)(struct xilinx_dma_chan *chan);
 };
 
+struct dma_config {
+	enum xdma_ip_type dmatype;
+};
+
 /**
  * struct xilinx_dma_device - DMA device structure
  * @regs: I/O mapped base address
@@ -351,7 +355,7 @@ struct xilinx_dma_chan {
  * @has_sg: Specifies whether Scatter-Gather is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
- * @dmatype: DMA ip type
+ * @dma_config: DMA config structure
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -361,7 +365,7 @@ struct xilinx_dma_device {
 	bool has_sg;
 	u32 flush_on_fsync;
 	bool ext_addr;
-	enum xdma_ip_type dmatype;
+	const struct dma_config *dma_config;
 };
 
 /* Macros */
@@ -573,12 +577,12 @@ xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
 	if (!desc)
 		return;
 
-	if (chan->xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		list_for_each_entry_safe(segment, next, &desc->segments, node) {
 			list_del(&segment->node);
 			xilinx_vdma_free_tx_segment(chan, segment);
 		}
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		list_for_each_entry_safe(cdma_segment, cdma_next,
 					 &desc->segments, node) {
 			list_del(&cdma_segment->node);
@@ -641,7 +645,7 @@ static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
 	dev_dbg(chan->dev, "Free all channel resources.\n");
 
 	xilinx_dma_free_descriptors(chan);
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		xilinx_dma_free_tx_segment(chan, chan->seg_v);
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
@@ -711,13 +715,13 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 	 * We need the descriptor to be aligned to 64bytes
 	 * for meeting Xilinx VDMA specification requirement.
 	 */
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		chan->desc_pool = dma_pool_create("xilinx_dma_desc_pool",
 				   chan->dev,
 				   sizeof(struct xilinx_axidma_tx_segment),
 				   __alignof__(struct xilinx_axidma_tx_segment),
 				   0);
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
 				   chan->dev,
 				   sizeof(struct xilinx_cdma_tx_segment),
@@ -738,7 +742,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 		return -ENOMEM;
 	}
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		/*
 		 * For AXI DMA case after submitting a pending_list, keep
 		 * an extra segment allocated so that the "next descriptor"
@@ -751,7 +755,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 
 	dma_cookie_init(dchan);
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		/* For AXI DMA resetting once channel will reset the
 		 * other channel as well so enable the interrupts here.
 		 */
@@ -759,7 +763,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 			      XILINX_DMA_DMAXR_ALL_IRQ_MASK);
 	}
 
-	if ((chan->xdev->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
+	if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
 		dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
 			     XILINX_CDMA_CR_SGMODE);
 
@@ -790,7 +794,7 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 	if (ret == DMA_COMPLETE || !txstate)
 		return ret;
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		spin_lock_irqsave(&chan->lock, flags);
 
 		desc = list_last_entry(&chan->active_list,
@@ -1332,12 +1336,12 @@ static void append_desc_queue(struct xilinx_dma_chan *chan,
 	 */
 	tail_desc = list_last_entry(&chan->pending_list,
 				    struct xilinx_dma_tx_descriptor, node);
-	if (chan->xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		tail_segment = list_last_entry(&tail_desc->segments,
 					       struct xilinx_vdma_tx_segment,
 					       node);
 		tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		cdma_tail_segment = list_last_entry(&tail_desc->segments,
 						struct xilinx_cdma_tx_segment,
 						node);
@@ -1357,8 +1361,8 @@ append:
 	list_add_tail(&desc->node, &chan->pending_list);
 	chan->desc_pendingcount++;
 
-	if (chan->has_sg && (chan->xdev->dmatype == XDMA_TYPE_VDMA) &&
-	    unlikely(chan->desc_pendingcount > chan->num_frms)) {
+	if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
+	    && unlikely(chan->desc_pendingcount > chan->num_frms)) {
 		dev_dbg(chan->dev, "desc pendingcount is too high\n");
 		chan->desc_pendingcount = chan->num_frms;
 	}
@@ -1811,7 +1815,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		chan->id = 0;
 
 		chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
-		if (xdev->dmatype == XDMA_TYPE_VDMA) {
+		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 			chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
 
 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
@@ -1824,7 +1828,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		chan->id = 1;
 
 		chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
-		if (xdev->dmatype == XDMA_TYPE_VDMA) {
+		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 			chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
 
 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
@@ -1845,9 +1849,9 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		return err;
 	}
 
-	if (xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		chan->start_transfer = xilinx_dma_start_transfer;
-	else if (xdev->dmatype == XDMA_TYPE_CDMA)
+	else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
 		chan->start_transfer = xilinx_cdma_start_transfer;
 	else
 		chan->start_transfer = xilinx_vdma_start_transfer;
@@ -1894,13 +1898,22 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);
 }
 
+static const struct dma_config axidma_config = {
+	.dmatype = XDMA_TYPE_AXIDMA,
+};
+
+static const struct dma_config axicdma_config = {
+	.dmatype = XDMA_TYPE_CDMA,
+};
+
+static const struct dma_config axivdma_config = {
+	.dmatype = XDMA_TYPE_VDMA,
+};
+
 static const struct of_device_id xilinx_dma_of_ids[] = {
-	{ .compatible = "xlnx,axi-dma-1.00.a",
-	  .data = (void *)XDMA_TYPE_AXIDMA },
-	{ .compatible = "xlnx,axi-cdma-1.00.a",
-	  .data = (void *)XDMA_TYPE_CDMA },
-	{ .compatible = "xlnx,axi-vdma-1.00.a",
-	  .data = (void *)XDMA_TYPE_VDMA },
+	{ .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
+	{ .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
+	{ .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
 	{}
 };
 MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
@@ -1915,7 +1928,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	struct xilinx_dma_device *xdev;
-	struct device_node *child;
+	struct device_node *child, *np = pdev->dev.of_node;
 	struct resource *io;
 	u32 num_frames, addr_width;
 	int i, err;
@@ -1926,7 +1939,13 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	xdev->dev = &pdev->dev;
-	xdev->dmatype = (enum xdma_ip_type)of_device_get_match_data(&pdev->dev);
+	if (np) {
+		const struct of_device_id *match;
+
+		match = of_match_node(xilinx_dma_of_ids, np);
+		if (match && match->data)
+			xdev->dma_config = match->data;
+	}
 
 	/* Request and map I/O memory */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1937,7 +1956,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
 
-	if (xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		err = of_property_read_u32(node, "xlnx,num-fstores",
 					   &num_frames);
 		if (err < 0) {
@@ -1969,7 +1988,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&xdev->common.channels);
-	if (!(xdev->dmatype == XDMA_TYPE_CDMA)) {
+	if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
 		dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
 		dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
 	}
@@ -1981,12 +2000,12 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.device_terminate_all = xilinx_dma_terminate_all;
 	xdev->common.device_tx_status = xilinx_dma_tx_status;
 	xdev->common.device_issue_pending = xilinx_dma_issue_pending;
-	if (xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
 		/* Residue calculation is supported by only AXI DMA */
 		xdev->common.residue_granularity =
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
-	} else if (xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
 		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
 	} else {
@@ -2003,7 +2022,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 			goto error;
 	}
 
-	if (xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
 			if (xdev->chan[i])
 				xdev->chan[i]->num_frms = num_frames;
-- 
2.1.2

[PATCH v4 1/3] dmaengine: vdma: Add config structure to differentiate dmas

[Kedareswara rao Appana]

This patch adds config structure in the driver to differentiate
AXI DMA's and to add more features(clock support etc..) to these DMA's.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> None.
Changes for v3:
---> New patch.

 drivers/dma/xilinx/xilinx_vdma.c | 83 ++++++++++++++++++++++++----------------
 1 file changed, 51 insertions(+), 32 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index 70caea6..255cdca 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -342,6 +342,10 @@ struct xilinx_dma_chan {
 	void (*start_transfer)(struct xilinx_dma_chan *chan);
 };
 
+struct dma_config {
+	enum xdma_ip_type dmatype;
+};
+
 /**
  * struct xilinx_dma_device - DMA device structure
  * @regs: I/O mapped base address
@@ -351,7 +355,7 @@ struct xilinx_dma_chan {
  * @has_sg: Specifies whether Scatter-Gather is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
- * @dmatype: DMA ip type
+ * @dma_config: DMA config structure
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -361,7 +365,7 @@ struct xilinx_dma_device {
 	bool has_sg;
 	u32 flush_on_fsync;
 	bool ext_addr;
-	enum xdma_ip_type dmatype;
+	const struct dma_config *dma_config;
 };
 
 /* Macros */
@@ -573,12 +577,12 @@ xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
 	if (!desc)
 		return;
 
-	if (chan->xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		list_for_each_entry_safe(segment, next, &desc->segments, node) {
 			list_del(&segment->node);
 			xilinx_vdma_free_tx_segment(chan, segment);
 		}
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		list_for_each_entry_safe(cdma_segment, cdma_next,
 					 &desc->segments, node) {
 			list_del(&cdma_segment->node);
@@ -641,7 +645,7 @@ static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
 	dev_dbg(chan->dev, "Free all channel resources.\n");
 
 	xilinx_dma_free_descriptors(chan);
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		xilinx_dma_free_tx_segment(chan, chan->seg_v);
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
@@ -711,13 +715,13 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 	 * We need the descriptor to be aligned to 64bytes
 	 * for meeting Xilinx VDMA specification requirement.
 	 */
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		chan->desc_pool = dma_pool_create("xilinx_dma_desc_pool",
 				   chan->dev,
 				   sizeof(struct xilinx_axidma_tx_segment),
 				   __alignof__(struct xilinx_axidma_tx_segment),
 				   0);
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
 				   chan->dev,
 				   sizeof(struct xilinx_cdma_tx_segment),
@@ -738,7 +742,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 		return -ENOMEM;
 	}
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		/*
 		 * For AXI DMA case after submitting a pending_list, keep
 		 * an extra segment allocated so that the "next descriptor"
@@ -751,7 +755,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 
 	dma_cookie_init(dchan);
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		/* For AXI DMA resetting once channel will reset the
 		 * other channel as well so enable the interrupts here.
 		 */
@@ -759,7 +763,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 			      XILINX_DMA_DMAXR_ALL_IRQ_MASK);
 	}
 
-	if ((chan->xdev->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
+	if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
 		dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
 			     XILINX_CDMA_CR_SGMODE);
 
@@ -790,7 +794,7 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 	if (ret == DMA_COMPLETE || !txstate)
 		return ret;
 
-	if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		spin_lock_irqsave(&chan->lock, flags);
 
 		desc = list_last_entry(&chan->active_list,
@@ -1332,12 +1336,12 @@ static void append_desc_queue(struct xilinx_dma_chan *chan,
 	 */
 	tail_desc = list_last_entry(&chan->pending_list,
 				    struct xilinx_dma_tx_descriptor, node);
-	if (chan->xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		tail_segment = list_last_entry(&tail_desc->segments,
 					       struct xilinx_vdma_tx_segment,
 					       node);
 		tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
-	} else if (chan->xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		cdma_tail_segment = list_last_entry(&tail_desc->segments,
 						struct xilinx_cdma_tx_segment,
 						node);
@@ -1357,8 +1361,8 @@ append:
 	list_add_tail(&desc->node, &chan->pending_list);
 	chan->desc_pendingcount++;
 
-	if (chan->has_sg && (chan->xdev->dmatype == XDMA_TYPE_VDMA) &&
-	    unlikely(chan->desc_pendingcount > chan->num_frms)) {
+	if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
+	    && unlikely(chan->desc_pendingcount > chan->num_frms)) {
 		dev_dbg(chan->dev, "desc pendingcount is too high\n");
 		chan->desc_pendingcount = chan->num_frms;
 	}
@@ -1811,7 +1815,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		chan->id = 0;
 
 		chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
-		if (xdev->dmatype == XDMA_TYPE_VDMA) {
+		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 			chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
 
 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
@@ -1824,7 +1828,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		chan->id = 1;
 
 		chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
-		if (xdev->dmatype == XDMA_TYPE_VDMA) {
+		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 			chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
 
 			if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
@@ -1845,9 +1849,9 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 		return err;
 	}
 
-	if (xdev->dmatype == XDMA_TYPE_AXIDMA)
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
 		chan->start_transfer = xilinx_dma_start_transfer;
-	else if (xdev->dmatype == XDMA_TYPE_CDMA)
+	else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
 		chan->start_transfer = xilinx_cdma_start_transfer;
 	else
 		chan->start_transfer = xilinx_vdma_start_transfer;
@@ -1894,13 +1898,22 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);
 }
 
+static const struct dma_config axidma_config = {
+	.dmatype = XDMA_TYPE_AXIDMA,
+};
+
+static const struct dma_config axicdma_config = {
+	.dmatype = XDMA_TYPE_CDMA,
+};
+
+static const struct dma_config axivdma_config = {
+	.dmatype = XDMA_TYPE_VDMA,
+};
+
 static const struct of_device_id xilinx_dma_of_ids[] = {
-	{ .compatible = "xlnx,axi-dma-1.00.a",
-	  .data = (void *)XDMA_TYPE_AXIDMA },
-	{ .compatible = "xlnx,axi-cdma-1.00.a",
-	  .data = (void *)XDMA_TYPE_CDMA },
-	{ .compatible = "xlnx,axi-vdma-1.00.a",
-	  .data = (void *)XDMA_TYPE_VDMA },
+	{ .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
+	{ .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
+	{ .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
 	{}
 };
 MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
@@ -1915,7 +1928,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	struct xilinx_dma_device *xdev;
-	struct device_node *child;
+	struct device_node *child, *np = pdev->dev.of_node;
 	struct resource *io;
 	u32 num_frames, addr_width;
 	int i, err;
@@ -1926,7 +1939,13 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	xdev->dev = &pdev->dev;
-	xdev->dmatype = (enum xdma_ip_type)of_device_get_match_data(&pdev->dev);
+	if (np) {
+		const struct of_device_id *match;
+
+		match = of_match_node(xilinx_dma_of_ids, np);
+		if (match && match->data)
+			xdev->dma_config = match->data;
+	}
 
 	/* Request and map I/O memory */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1937,7 +1956,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
 
-	if (xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		err = of_property_read_u32(node, "xlnx,num-fstores",
 					   &num_frames);
 		if (err < 0) {
@@ -1969,7 +1988,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&xdev->common.channels);
-	if (!(xdev->dmatype == XDMA_TYPE_CDMA)) {
+	if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
 		dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
 		dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
 	}
@@ -1981,12 +2000,12 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.device_terminate_all = xilinx_dma_terminate_all;
 	xdev->common.device_tx_status = xilinx_dma_tx_status;
 	xdev->common.device_issue_pending = xilinx_dma_issue_pending;
-	if (xdev->dmatype == XDMA_TYPE_AXIDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
 		/* Residue calculation is supported by only AXI DMA */
 		xdev->common.residue_granularity =
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
-	} else if (xdev->dmatype == XDMA_TYPE_CDMA) {
+	} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 		dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
 		xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
 	} else {
@@ -2003,7 +2022,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 			goto error;
 	}
 
-	if (xdev->dmatype == XDMA_TYPE_VDMA) {
+	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
 			if (xdev->chan[i])
 				xdev->chan[i]->num_frms = num_frames;
-- 
2.1.2

[PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

[Kedareswara rao Appana]

This patch updates the binding doc with clock description
for AXI DMA's.

Acked-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> None.
Changes for v3:
---> Added clock support for all the AXI DMA's.
Changes for v2:
--> Listed down all the clocks supported by the h/w
    as suggested by the Datta.
--> Used IP clock names instead of shortcut clock name

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt        | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index fcc2b65..a1f2683 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -21,6 +21,18 @@ Required properties:
 - dma-channel child node: Should have at least one channel and can have up to
 	two channels per device. This node specifies the properties of each
 	DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+	For VDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+	For CDMA:
+	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+	FOR AXIDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+			   "m_axi_sg_aclk"
 
 Required properties for VDMA:
 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -60,6 +72,9 @@ axi_vdma_0: axivdma at 40030000 {
 	xlnx,num-fstores = <0x8>;
 	xlnx,flush-fsync = <0x1>;
 	xlnx,addrwidth = <0x20>;
+	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
 	dma-channel at 40030000 {
 		compatible = "xlnx,axi-vdma-mm2s-channel";
 		interrupts = < 0 54 4 >;
-- 
2.1.2

[PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

[Kedareswara rao Appana]

This patch updates the binding doc with clock description
for AXI DMA's.

Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> None.
Changes for v3:
---> Added clock support for all the AXI DMA's.
Changes for v2:
--> Listed down all the clocks supported by the h/w
    as suggested by the Datta.
--> Used IP clock names instead of shortcut clock name

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt        | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index fcc2b65..a1f2683 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -21,6 +21,18 @@ Required properties:
 - dma-channel child node: Should have at least one channel and can have up to
 	two channels per device. This node specifies the properties of each
 	DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+	For VDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+	For CDMA:
+	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+	FOR AXIDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+			   "m_axi_sg_aclk"
 
 Required properties for VDMA:
 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -60,6 +72,9 @@ axi_vdma_0: axivdma@40030000 {
 	xlnx,num-fstores = <0x8>;
 	xlnx,flush-fsync = <0x1>;
 	xlnx,addrwidth = <0x20>;
+	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
 	dma-channel@40030000 {
 		compatible = "xlnx,axi-vdma-mm2s-channel";
 		interrupts = < 0 54 4 >;
-- 
2.1.2

[PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

[Kedareswara rao Appana]

This patch updates the binding doc with clock description
for AXI DMA's.

Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> None.
Changes for v3:
---> Added clock support for all the AXI DMA's.
Changes for v2:
--> Listed down all the clocks supported by the h/w
    as suggested by the Datta.
--> Used IP clock names instead of shortcut clock name

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt        | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index fcc2b65..a1f2683 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -21,6 +21,18 @@ Required properties:
 - dma-channel child node: Should have at least one channel and can have up to
 	two channels per device. This node specifies the properties of each
 	DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+	For VDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+	For CDMA:
+	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+	FOR AXIDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+			   "m_axi_sg_aclk"
 
 Required properties for VDMA:
 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -60,6 +72,9 @@ axi_vdma_0: axivdma@40030000 {
 	xlnx,num-fstores = <0x8>;
 	xlnx,flush-fsync = <0x1>;
 	xlnx,addrwidth = <0x20>;
+	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
 	dma-channel@40030000 {
 		compatible = "xlnx,axi-vdma-mm2s-channel";
 		interrupts = < 0 54 4 >;
-- 
2.1.2

[PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

[Rob Herring]

On Fri, Apr 22, 2016 at 11:43:49AM +0530, Kedareswara rao Appana wrote:
> This patch updates the binding doc with clock description
> for AXI DMA's.
> 
> Acked-by: S?ren Brinkmann <soren.brinkmann@xilinx.com>
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> ---
> Changes for v4:
> ---> None.
> Changes for v3:
> ---> Added clock support for all the AXI DMA's.
> Changes for v2:
> --> Listed down all the clocks supported by the h/w
>     as suggested by the Datta.
> --> Used IP clock names instead of shortcut clock name
> 
>  .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt        | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

[Rob Herring]

On Fri, Apr 22, 2016 at 11:43:49AM +0530, Kedareswara rao Appana wrote:
> This patch updates the binding doc with clock description
> for AXI DMA's.
> 
> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> ---
> Changes for v4:
> ---> None.
> Changes for v3:
> ---> Added clock support for all the AXI DMA's.
> Changes for v2:
> --> Listed down all the clocks supported by the h/w
>     as suggested by the Datta.
> --> Used IP clock names instead of shortcut clock name
> 
>  .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt        | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

[Rob Herring]

On Fri, Apr 22, 2016 at 11:43:49AM +0530, Kedareswara rao Appana wrote:
> This patch updates the binding doc with clock description
> for AXI DMA's.
> 
> Acked-by: Sören Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Kedareswara rao Appana <appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> ---
> Changes for v4:
> ---> None.
> Changes for v3:
> ---> Added clock support for all the AXI DMA's.
> Changes for v2:
> --> Listed down all the clocks supported by the h/w
>     as suggested by the Datta.
> --> Used IP clock names instead of shortcut clock name
> 
>  .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt        | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] dmaengine: vdma: Add clock support

[Kedareswara rao Appana]

Added basic clock support for axi dma's.
The clocks are requested at probe and released at remove.

Reviewed-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> Documented struct members as suggested by Soren.
---> Fixed required clock according to binding but a failure is ignored
in the cdma case as suggested by Soren.
---> Removed unnecessary IS_ERR checks during disabling the clocks.
Changes for v3:
---> Added clock support for all the AXI DMA's.
---> Fixed clk_unprepare leak during probe fail as suggested by Moritz.
---> Fixed comment driver specifically asks for the clocks it needs and return
an error if a mandatory clock is missing as suggested by soren.
Changes for v2:
---> None.

 drivers/dma/xilinx/xilinx_vdma.c | 226 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 224 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index 255cdca..51c633f 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -44,6 +44,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include "../dmaengine.h"
 
@@ -344,6 +345,9 @@ struct xilinx_dma_chan {
 
 struct dma_config {
 	enum xdma_ip_type dmatype;
+	int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
+			struct clk **tx_clk, struct clk **txs_clk,
+			struct clk **rx_clk, struct clk **rxs_clk);
 };
 
 /**
@@ -355,7 +359,13 @@ struct dma_config {
  * @has_sg: Specifies whether Scatter-Gather is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
+ * @pdev: Platform device structure pointer
  * @dma_config: DMA config structure
+ * @axi_clk: DMA Axi4-lite interace clock
+ * @tx_clk: DMA mm2s clock
+ * @txs_clk: DMA mm2s stream clock
+ * @rx_clk: DMA s2mm clock
+ * @rxs_clk: DMA s2mm stream clock
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -365,7 +375,13 @@ struct xilinx_dma_device {
 	bool has_sg;
 	u32 flush_on_fsync;
 	bool ext_addr;
+	struct platform_device  *pdev;
 	const struct dma_config *dma_config;
+	struct clk *axi_clk;
+	struct clk *tx_clk;
+	struct clk *txs_clk;
+	struct clk *rx_clk;
+	struct clk *rxs_clk;
 };
 
 /* Macros */
@@ -1757,6 +1773,195 @@ static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
 	list_del(&chan->common.device_node);
 }
 
+static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **tx_clk, struct clk **rx_clk,
+			    struct clk **sg_clk, struct clk **tmp_clk)
+{
+	int err;
+
+	*tmp_clk = NULL;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
+		return err;
+	}
+
+	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+	if (IS_ERR(*tx_clk))
+		*tx_clk = NULL;
+
+	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+	if (IS_ERR(*rx_clk))
+		*rx_clk = NULL;
+
+	*sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
+	if (IS_ERR(*sg_clk))
+		*sg_clk = NULL;
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*tx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	err = clk_prepare_enable(*rx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
+		goto err_disable_txclk;
+	}
+
+	err = clk_prepare_enable(*sg_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable sg_clk (%u)\n", err);
+		goto err_disable_rxclk;
+	}
+
+	return 0;
+
+err_disable_rxclk:
+	clk_disable_unprepare(*rx_clk);
+err_disable_txclk:
+	clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **dev_clk, struct clk **tmp_clk,
+			    struct clk **tmp1_clk, struct clk **tmp2_clk)
+{
+	int err;
+
+	*tmp_clk = NULL;
+	*tmp1_clk = NULL;
+	*tmp2_clk = NULL;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_clk (%u)\n", err);
+		return err;
+	}
+
+	*dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
+	if (IS_ERR(*dev_clk)) {
+		err = PTR_ERR(*dev_clk);
+		dev_err(&pdev->dev, "failed to get dev_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*dev_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable dev_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	return 0;
+
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **tx_clk, struct clk **txs_clk,
+			    struct clk **rx_clk, struct clk **rxs_clk)
+{
+	int err;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
+		return err;
+	}
+
+	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+	if (IS_ERR(*tx_clk))
+		*tx_clk = NULL;
+
+	*txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
+	if (IS_ERR(*txs_clk))
+		*txs_clk = NULL;
+
+	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+	if (IS_ERR(*rx_clk))
+		*rx_clk = NULL;
+
+	*rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
+	if (IS_ERR(*rxs_clk))
+		*rxs_clk = NULL;
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*tx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	err = clk_prepare_enable(*txs_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable txs_clk (%u)\n", err);
+		goto err_disable_txclk;
+	}
+
+	err = clk_prepare_enable(*rx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
+		goto err_disable_txsclk;
+	}
+
+	err = clk_prepare_enable(*rxs_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rxs_clk (%u)\n", err);
+		goto err_disable_rxclk;
+	}
+
+	return 0;
+
+err_disable_rxclk:
+	clk_disable_unprepare(*rx_clk);
+err_disable_txsclk:
+	clk_disable_unprepare(*txs_clk);
+err_disable_txclk:
+	clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
+{
+	clk_disable_unprepare(xdev->rxs_clk);
+	clk_disable_unprepare(xdev->rx_clk);
+	clk_disable_unprepare(xdev->txs_clk);
+	clk_disable_unprepare(xdev->tx_clk);
+	clk_disable_unprepare(xdev->axi_clk);
+}
+
 /**
  * xilinx_dma_chan_probe - Per Channel Probing
  * It get channel features from the device tree entry and
@@ -1900,14 +2105,17 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 
 static const struct dma_config axidma_config = {
 	.dmatype = XDMA_TYPE_AXIDMA,
+	.clk_init = axidma_clk_init,
 };
 
 static const struct dma_config axicdma_config = {
 	.dmatype = XDMA_TYPE_CDMA,
+	.clk_init = axicdma_clk_init,
 };
 
 static const struct dma_config axivdma_config = {
 	.dmatype = XDMA_TYPE_VDMA,
+	.clk_init = axivdma_clk_init,
 };
 
 static const struct of_device_id xilinx_dma_of_ids[] = {
@@ -1926,6 +2134,9 @@ MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
  */
 static int xilinx_dma_probe(struct platform_device *pdev)
 {
+	int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
+			struct clk **, struct clk **, struct clk **)
+					= axivdma_clk_init;
 	struct device_node *node = pdev->dev.of_node;
 	struct xilinx_dma_device *xdev;
 	struct device_node *child, *np = pdev->dev.of_node;
@@ -1943,10 +2154,17 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		const struct of_device_id *match;
 
 		match = of_match_node(xilinx_dma_of_ids, np);
-		if (match && match->data)
+		if (match && match->data) {
 			xdev->dma_config = match->data;
+			clk_init = xdev->dma_config->clk_init;
+		}
 	}
 
+	err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
+		       &xdev->rx_clk, &xdev->rxs_clk);
+	if (err)
+		return err;
+
 	/* Request and map I/O memory */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	xdev->regs = devm_ioremap_resource(&pdev->dev, io);
@@ -2019,7 +2237,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	for_each_child_of_node(node, child) {
 		err = xilinx_dma_chan_probe(xdev, child);
 		if (err < 0)
-			goto error;
+			goto disable_clks;
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2043,6 +2261,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	return 0;
 
+disable_clks:
+	xdma_disable_allclks(xdev);
 error:
 	for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
 		if (xdev->chan[i])
@@ -2070,6 +2290,8 @@ static int xilinx_dma_remove(struct platform_device *pdev)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
 
+	xdma_disable_allclks(xdev);
+
 	return 0;
 }
 
-- 
2.1.2

[PATCH v4 3/3] dmaengine: vdma: Add clock support

[Kedareswara rao Appana]

Added basic clock support for axi dma's.
The clocks are requested at probe and released at remove.

Reviewed-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v4:
---> Documented struct members as suggested by Soren.
---> Fixed required clock according to binding but a failure is ignored
in the cdma case as suggested by Soren.
---> Removed unnecessary IS_ERR checks during disabling the clocks.
Changes for v3:
---> Added clock support for all the AXI DMA's.
---> Fixed clk_unprepare leak during probe fail as suggested by Moritz.
---> Fixed comment driver specifically asks for the clocks it needs and return
an error if a mandatory clock is missing as suggested by soren.
Changes for v2:
---> None.

 drivers/dma/xilinx/xilinx_vdma.c | 226 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 224 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index 255cdca..51c633f 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -44,6 +44,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include "../dmaengine.h"
 
@@ -344,6 +345,9 @@ struct xilinx_dma_chan {
 
 struct dma_config {
 	enum xdma_ip_type dmatype;
+	int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
+			struct clk **tx_clk, struct clk **txs_clk,
+			struct clk **rx_clk, struct clk **rxs_clk);
 };
 
 /**
@@ -355,7 +359,13 @@ struct dma_config {
  * @has_sg: Specifies whether Scatter-Gather is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
+ * @pdev: Platform device structure pointer
  * @dma_config: DMA config structure
+ * @axi_clk: DMA Axi4-lite interace clock
+ * @tx_clk: DMA mm2s clock
+ * @txs_clk: DMA mm2s stream clock
+ * @rx_clk: DMA s2mm clock
+ * @rxs_clk: DMA s2mm stream clock
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -365,7 +375,13 @@ struct xilinx_dma_device {
 	bool has_sg;
 	u32 flush_on_fsync;
 	bool ext_addr;
+	struct platform_device  *pdev;
 	const struct dma_config *dma_config;
+	struct clk *axi_clk;
+	struct clk *tx_clk;
+	struct clk *txs_clk;
+	struct clk *rx_clk;
+	struct clk *rxs_clk;
 };
 
 /* Macros */
@@ -1757,6 +1773,195 @@ static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
 	list_del(&chan->common.device_node);
 }
 
+static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **tx_clk, struct clk **rx_clk,
+			    struct clk **sg_clk, struct clk **tmp_clk)
+{
+	int err;
+
+	*tmp_clk = NULL;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
+		return err;
+	}
+
+	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+	if (IS_ERR(*tx_clk))
+		*tx_clk = NULL;
+
+	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+	if (IS_ERR(*rx_clk))
+		*rx_clk = NULL;
+
+	*sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
+	if (IS_ERR(*sg_clk))
+		*sg_clk = NULL;
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*tx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	err = clk_prepare_enable(*rx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
+		goto err_disable_txclk;
+	}
+
+	err = clk_prepare_enable(*sg_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable sg_clk (%u)\n", err);
+		goto err_disable_rxclk;
+	}
+
+	return 0;
+
+err_disable_rxclk:
+	clk_disable_unprepare(*rx_clk);
+err_disable_txclk:
+	clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **dev_clk, struct clk **tmp_clk,
+			    struct clk **tmp1_clk, struct clk **tmp2_clk)
+{
+	int err;
+
+	*tmp_clk = NULL;
+	*tmp1_clk = NULL;
+	*tmp2_clk = NULL;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_clk (%u)\n", err);
+		return err;
+	}
+
+	*dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
+	if (IS_ERR(*dev_clk)) {
+		err = PTR_ERR(*dev_clk);
+		dev_err(&pdev->dev, "failed to get dev_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*dev_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable dev_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	return 0;
+
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **tx_clk, struct clk **txs_clk,
+			    struct clk **rx_clk, struct clk **rxs_clk)
+{
+	int err;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
+		return err;
+	}
+
+	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+	if (IS_ERR(*tx_clk))
+		*tx_clk = NULL;
+
+	*txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
+	if (IS_ERR(*txs_clk))
+		*txs_clk = NULL;
+
+	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+	if (IS_ERR(*rx_clk))
+		*rx_clk = NULL;
+
+	*rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
+	if (IS_ERR(*rxs_clk))
+		*rxs_clk = NULL;
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*tx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	err = clk_prepare_enable(*txs_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable txs_clk (%u)\n", err);
+		goto err_disable_txclk;
+	}
+
+	err = clk_prepare_enable(*rx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
+		goto err_disable_txsclk;
+	}
+
+	err = clk_prepare_enable(*rxs_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rxs_clk (%u)\n", err);
+		goto err_disable_rxclk;
+	}
+
+	return 0;
+
+err_disable_rxclk:
+	clk_disable_unprepare(*rx_clk);
+err_disable_txsclk:
+	clk_disable_unprepare(*txs_clk);
+err_disable_txclk:
+	clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
+{
+	clk_disable_unprepare(xdev->rxs_clk);
+	clk_disable_unprepare(xdev->rx_clk);
+	clk_disable_unprepare(xdev->txs_clk);
+	clk_disable_unprepare(xdev->tx_clk);
+	clk_disable_unprepare(xdev->axi_clk);
+}
+
 /**
  * xilinx_dma_chan_probe - Per Channel Probing
  * It get channel features from the device tree entry and
@@ -1900,14 +2105,17 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 
 static const struct dma_config axidma_config = {
 	.dmatype = XDMA_TYPE_AXIDMA,
+	.clk_init = axidma_clk_init,
 };
 
 static const struct dma_config axicdma_config = {
 	.dmatype = XDMA_TYPE_CDMA,
+	.clk_init = axicdma_clk_init,
 };
 
 static const struct dma_config axivdma_config = {
 	.dmatype = XDMA_TYPE_VDMA,
+	.clk_init = axivdma_clk_init,
 };
 
 static const struct of_device_id xilinx_dma_of_ids[] = {
@@ -1926,6 +2134,9 @@ MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
  */
 static int xilinx_dma_probe(struct platform_device *pdev)
 {
+	int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
+			struct clk **, struct clk **, struct clk **)
+					= axivdma_clk_init;
 	struct device_node *node = pdev->dev.of_node;
 	struct xilinx_dma_device *xdev;
 	struct device_node *child, *np = pdev->dev.of_node;
@@ -1943,10 +2154,17 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		const struct of_device_id *match;
 
 		match = of_match_node(xilinx_dma_of_ids, np);
-		if (match && match->data)
+		if (match && match->data) {
 			xdev->dma_config = match->data;
+			clk_init = xdev->dma_config->clk_init;
+		}
 	}
 
+	err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
+		       &xdev->rx_clk, &xdev->rxs_clk);
+	if (err)
+		return err;
+
 	/* Request and map I/O memory */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	xdev->regs = devm_ioremap_resource(&pdev->dev, io);
@@ -2019,7 +2237,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	for_each_child_of_node(node, child) {
 		err = xilinx_dma_chan_probe(xdev, child);
 		if (err < 0)
-			goto error;
+			goto disable_clks;
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2043,6 +2261,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	return 0;
 
+disable_clks:
+	xdma_disable_allclks(xdev);
 error:
 	for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
 		if (xdev->chan[i])
@@ -2070,6 +2290,8 @@ static int xilinx_dma_remove(struct platform_device *pdev)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
 
+	xdma_disable_allclks(xdev);
+
 	return 0;
 }
 
-- 
2.1.2

[PATCH v4 3/3] dmaengine: vdma: Add clock support

[Kedareswara rao Appana]

Added basic clock support for axi dma's.
The clocks are requested at probe and released at remove.

Reviewed-by: Shubhrajyoti Datta <shubhraj-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Kedareswara rao Appana <appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---
Changes for v4:
---> Documented struct members as suggested by Soren.
---> Fixed required clock according to binding but a failure is ignored
in the cdma case as suggested by Soren.
---> Removed unnecessary IS_ERR checks during disabling the clocks.
Changes for v3:
---> Added clock support for all the AXI DMA's.
---> Fixed clk_unprepare leak during probe fail as suggested by Moritz.
---> Fixed comment driver specifically asks for the clocks it needs and return
an error if a mandatory clock is missing as suggested by soren.
Changes for v2:
---> None.

 drivers/dma/xilinx/xilinx_vdma.c | 226 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 224 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index 255cdca..51c633f 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -44,6 +44,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_irq.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include "../dmaengine.h"
 
@@ -344,6 +345,9 @@ struct xilinx_dma_chan {
 
 struct dma_config {
 	enum xdma_ip_type dmatype;
+	int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
+			struct clk **tx_clk, struct clk **txs_clk,
+			struct clk **rx_clk, struct clk **rxs_clk);
 };
 
 /**
@@ -355,7 +359,13 @@ struct dma_config {
  * @has_sg: Specifies whether Scatter-Gather is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
+ * @pdev: Platform device structure pointer
  * @dma_config: DMA config structure
+ * @axi_clk: DMA Axi4-lite interace clock
+ * @tx_clk: DMA mm2s clock
+ * @txs_clk: DMA mm2s stream clock
+ * @rx_clk: DMA s2mm clock
+ * @rxs_clk: DMA s2mm stream clock
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -365,7 +375,13 @@ struct xilinx_dma_device {
 	bool has_sg;
 	u32 flush_on_fsync;
 	bool ext_addr;
+	struct platform_device  *pdev;
 	const struct dma_config *dma_config;
+	struct clk *axi_clk;
+	struct clk *tx_clk;
+	struct clk *txs_clk;
+	struct clk *rx_clk;
+	struct clk *rxs_clk;
 };
 
 /* Macros */
@@ -1757,6 +1773,195 @@ static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
 	list_del(&chan->common.device_node);
 }
 
+static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **tx_clk, struct clk **rx_clk,
+			    struct clk **sg_clk, struct clk **tmp_clk)
+{
+	int err;
+
+	*tmp_clk = NULL;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
+		return err;
+	}
+
+	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+	if (IS_ERR(*tx_clk))
+		*tx_clk = NULL;
+
+	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+	if (IS_ERR(*rx_clk))
+		*rx_clk = NULL;
+
+	*sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
+	if (IS_ERR(*sg_clk))
+		*sg_clk = NULL;
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*tx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	err = clk_prepare_enable(*rx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
+		goto err_disable_txclk;
+	}
+
+	err = clk_prepare_enable(*sg_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable sg_clk (%u)\n", err);
+		goto err_disable_rxclk;
+	}
+
+	return 0;
+
+err_disable_rxclk:
+	clk_disable_unprepare(*rx_clk);
+err_disable_txclk:
+	clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **dev_clk, struct clk **tmp_clk,
+			    struct clk **tmp1_clk, struct clk **tmp2_clk)
+{
+	int err;
+
+	*tmp_clk = NULL;
+	*tmp1_clk = NULL;
+	*tmp2_clk = NULL;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_clk (%u)\n", err);
+		return err;
+	}
+
+	*dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
+	if (IS_ERR(*dev_clk)) {
+		err = PTR_ERR(*dev_clk);
+		dev_err(&pdev->dev, "failed to get dev_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*dev_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable dev_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	return 0;
+
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
+			    struct clk **tx_clk, struct clk **txs_clk,
+			    struct clk **rx_clk, struct clk **rxs_clk)
+{
+	int err;
+
+	*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
+	if (IS_ERR(*axi_clk)) {
+		err = PTR_ERR(*axi_clk);
+		dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
+		return err;
+	}
+
+	*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
+	if (IS_ERR(*tx_clk))
+		*tx_clk = NULL;
+
+	*txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
+	if (IS_ERR(*txs_clk))
+		*txs_clk = NULL;
+
+	*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
+	if (IS_ERR(*rx_clk))
+		*rx_clk = NULL;
+
+	*rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
+	if (IS_ERR(*rxs_clk))
+		*rxs_clk = NULL;
+
+	err = clk_prepare_enable(*axi_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(*tx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+		goto err_disable_axiclk;
+	}
+
+	err = clk_prepare_enable(*txs_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable txs_clk (%u)\n", err);
+		goto err_disable_txclk;
+	}
+
+	err = clk_prepare_enable(*rx_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
+		goto err_disable_txsclk;
+	}
+
+	err = clk_prepare_enable(*rxs_clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable rxs_clk (%u)\n", err);
+		goto err_disable_rxclk;
+	}
+
+	return 0;
+
+err_disable_rxclk:
+	clk_disable_unprepare(*rx_clk);
+err_disable_txsclk:
+	clk_disable_unprepare(*txs_clk);
+err_disable_txclk:
+	clk_disable_unprepare(*tx_clk);
+err_disable_axiclk:
+	clk_disable_unprepare(*axi_clk);
+
+	return err;
+}
+
+static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
+{
+	clk_disable_unprepare(xdev->rxs_clk);
+	clk_disable_unprepare(xdev->rx_clk);
+	clk_disable_unprepare(xdev->txs_clk);
+	clk_disable_unprepare(xdev->tx_clk);
+	clk_disable_unprepare(xdev->axi_clk);
+}
+
 /**
  * xilinx_dma_chan_probe - Per Channel Probing
  * It get channel features from the device tree entry and
@@ -1900,14 +2105,17 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 
 static const struct dma_config axidma_config = {
 	.dmatype = XDMA_TYPE_AXIDMA,
+	.clk_init = axidma_clk_init,
 };
 
 static const struct dma_config axicdma_config = {
 	.dmatype = XDMA_TYPE_CDMA,
+	.clk_init = axicdma_clk_init,
 };
 
 static const struct dma_config axivdma_config = {
 	.dmatype = XDMA_TYPE_VDMA,
+	.clk_init = axivdma_clk_init,
 };
 
 static const struct of_device_id xilinx_dma_of_ids[] = {
@@ -1926,6 +2134,9 @@ MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
  */
 static int xilinx_dma_probe(struct platform_device *pdev)
 {
+	int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
+			struct clk **, struct clk **, struct clk **)
+					= axivdma_clk_init;
 	struct device_node *node = pdev->dev.of_node;
 	struct xilinx_dma_device *xdev;
 	struct device_node *child, *np = pdev->dev.of_node;
@@ -1943,10 +2154,17 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		const struct of_device_id *match;
 
 		match = of_match_node(xilinx_dma_of_ids, np);
-		if (match && match->data)
+		if (match && match->data) {
 			xdev->dma_config = match->data;
+			clk_init = xdev->dma_config->clk_init;
+		}
 	}
 
+	err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
+		       &xdev->rx_clk, &xdev->rxs_clk);
+	if (err)
+		return err;
+
 	/* Request and map I/O memory */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	xdev->regs = devm_ioremap_resource(&pdev->dev, io);
@@ -2019,7 +2237,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	for_each_child_of_node(node, child) {
 		err = xilinx_dma_chan_probe(xdev, child);
 		if (err < 0)
-			goto error;
+			goto disable_clks;
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2043,6 +2261,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	return 0;
 
+disable_clks:
+	xdma_disable_allclks(xdev);
 error:
 	for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
 		if (xdev->chan[i])
@@ -2070,6 +2290,8 @@ static int xilinx_dma_remove(struct platform_device *pdev)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
 
+	xdma_disable_allclks(xdev);
+
 	return 0;
 }
 
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Vinod Koul]

On Fri, Apr 22, 2016 at 11:43:47AM +0530, Kedareswara rao Appana wrote:
> This patch series adds basic clock support for AXI DMAS
> This patch series is created on top of the
> "dmaengine: vdma: AXI DMA's enhancments" patch series.

This fails due to above series not merged. Please resubmit once that one is
merged

-- 
~Vinod

Re: [PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Vinod Koul]

On Fri, Apr 22, 2016 at 11:43:47AM +0530, Kedareswara rao Appana wrote:
> This patch series adds basic clock support for AXI DMAS
> This patch series is created on top of the
> "dmaengine: vdma: AXI DMA's enhancments" patch series.

This fails due to above series not merged. Please resubmit once that one is
merged

-- 
~Vinod

[PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Appana Durga Kedareswara Rao]

Hi Vinod,

	

> -----Original Message-----
> From: dmaengine-owner at vger.kernel.org [mailto:dmaengine-
> owner at vger.kernel.org] On Behalf Of Vinod Koul
> Sent: Monday, May 02, 2016 3:22 PM
> To: Appana Durga Kedareswara Rao <appanad@xilinx.com>
> Cc: robh+dt at kernel.org; pawel.moll at arm.com; mark.rutland at arm.com;
> ijc+devicetree at hellion.org.uk; galak at codeaurora.org; Michal Simek
> <michals@xilinx.com>; Soren Brinkmann <sorenb@xilinx.com>;
> dan.j.williams at intel.com; Appana Durga Kedareswara Rao
> <appanad@xilinx.com>; moritz.fischer at ettus.com;
> laurent.pinchart at ideasonboard.com; luis at debethencourt.com; Anirudha
> Sarangi <anirudh@xilinx.com>; Punnaiah Choudary Kalluri
> <punnaia@xilinx.com>; Shubhrajyoti Datta <shubhraj@xilinx.com>;
> devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> kernel at vger.kernel.org; dmaengine at vger.kernel.org
> Subject: Re: [PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS
> 
> On Fri, Apr 22, 2016 at 11:43:47AM +0530, Kedareswara rao Appana wrote:
> > This patch series adds basic clock support for AXI DMAS This patch
> > series is created on top of the
> > "dmaengine: vdma: AXI DMA's enhancments" patch series.
> 
> This fails due to above series not merged. Please resubmit once that one is
> merged

Ok sure will resend once the above series got merged...

Regards,
Kedar.

> 
> --
> ~Vinod
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body
> of a message to majordomo at vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html

RE: [PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Appana Durga Kedareswara Rao]

Hi Vinod,

	

> -----Original Message-----
> From: dmaengine-owner@vger.kernel.org [mailto:dmaengine-
> owner@vger.kernel.org] On Behalf Of Vinod Koul
> Sent: Monday, May 02, 2016 3:22 PM
> To: Appana Durga Kedareswara Rao <appanad@xilinx.com>
> Cc: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com;
> ijc+devicetree@hellion.org.uk; galak@codeaurora.org; Michal Simek
> <michals@xilinx.com>; Soren Brinkmann <sorenb@xilinx.com>;
> dan.j.williams@intel.com; Appana Durga Kedareswara Rao
> <appanad@xilinx.com>; moritz.fischer@ettus.com;
> laurent.pinchart@ideasonboard.com; luis@debethencourt.com; Anirudha
> Sarangi <anirudh@xilinx.com>; Punnaiah Choudary Kalluri
> <punnaia@xilinx.com>; Shubhrajyoti Datta <shubhraj@xilinx.com>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; dmaengine@vger.kernel.org
> Subject: Re: [PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS
> 
> On Fri, Apr 22, 2016 at 11:43:47AM +0530, Kedareswara rao Appana wrote:
> > This patch series adds basic clock support for AXI DMAS This patch
> > series is created on top of the
> > "dmaengine: vdma: AXI DMA's enhancments" patch series.
> 
> This fails due to above series not merged. Please resubmit once that one is
> merged

Ok sure will resend once the above series got merged...

Regards,
Kedar.

> 
> --
> ~Vinod
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body
> of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html

RE: [PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS

[Appana Durga Kedareswara Rao]

Hi Vinod,

	

> -----Original Message-----
> From: dmaengine-owner@vger.kernel.org [mailto:dmaengine-
> owner@vger.kernel.org] On Behalf Of Vinod Koul
> Sent: Monday, May 02, 2016 3:22 PM
> To: Appana Durga Kedareswara Rao <appanad@xilinx.com>
> Cc: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com;
> ijc+devicetree@hellion.org.uk; galak@codeaurora.org; Michal Simek
> <michals@xilinx.com>; Soren Brinkmann <sorenb@xilinx.com>;
> dan.j.williams@intel.com; Appana Durga Kedareswara Rao
> <appanad@xilinx.com>; moritz.fischer@ettus.com;
> laurent.pinchart@ideasonboard.com; luis@debethencourt.com; Anirudha
> Sarangi <anirudh@xilinx.com>; Punnaiah Choudary Kalluri
> <punnaia@xilinx.com>; Shubhrajyoti Datta <shubhraj@xilinx.com>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; dmaengine@vger.kernel.org
> Subject: Re: [PATCH v4 0/3] dmaengine: Add clock support for AXI DMAS
> 
> On Fri, Apr 22, 2016 at 11:43:47AM +0530, Kedareswara rao Appana wrote:
> > This patch series adds basic clock support for AXI DMAS This patch
> > series is created on top of the
> > "dmaengine: vdma: AXI DMA's enhancments" patch series.
> 
> This fails due to above series not merged. Please resubmit once that one is
> merged

Ok sure will resend once the above series got merged...

Regards,
Kedar.

> 
> --
> ~Vinod
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body
> of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html