[PATCH V2 0/7] cpufreq: Get rid of cpufreq-dt's platform data

[PATCH V2 0/7] cpufreq: Get rid of cpufreq-dt's platform data

[Viresh Kumar]

Hi Guys,

The aim of the series is to kill the users of cpufreq-dt's platform
data, i.e. mvebu. And because that required a new API to the OPP core,
this just became a mix of cpufreq and OPP patches.

V2:
- New patch 2/7.
- Use -ENOTSUPP instead of -ENOSYS or -EINVAL for unimplemented APIs.
- Moved mvebu code to drivers/cpufreq and the same file creates the platform
  device now for maintaining ordering.
- Not cast required to drop 'const' for cpumask *.

Viresh Kumar (7):
  PM / OPP: -ENOSYS is applicable only to syscalls
  PM / OPP: Mark cpumask as const in dev_pm_opp_set_sharing_cpus()
  PM / OPP: Add dev_pm_opp_get_sharing_cpus()
  cpufreq: dt: Identify cpu-sharing for platforms without
    operating-points-v2
  mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared
  cpufreq: dt: Kill platform-data
  cpufreq: mvebu: Move cpufreq code into drivers/cpufreq/

 MAINTAINERS                     |   1 +
 arch/arm/mach-mvebu/pmsu.c      |  85 -------------------------------
 drivers/base/power/opp/cpu.c    |  48 +++++++++++++++++-
 drivers/cpufreq/Makefile        |   1 +
 drivers/cpufreq/cpufreq-dt.c    |  22 ++++-----
 drivers/cpufreq/mvebu-cpufreq.c | 107 ++++++++++++++++++++++++++++++++++++++++
 include/linux/cpufreq-dt.h      |  24 ---------
 include/linux/pm_opp.h          |  36 ++++++++------
 8 files changed, 187 insertions(+), 137 deletions(-)
 create mode 100644 drivers/cpufreq/mvebu-cpufreq.c
 delete mode 100644 include/linux/cpufreq-dt.h

-- 
2.7.1.410.g6faf27b

[PATCH V2 1/7] PM / OPP: -ENOSYS is applicable only to syscalls

[Viresh Kumar]

Some of the routines have used -ENOSYS for the cases where the
functionality isn't implemented in the kernel. But ENOSYS is supposed to
be used only for syscalls.

Replace that with -ENOTSUPP, which specifically means that the operation
isn't supported.

While at it, replace exiting -EINVAL errors for similar cases to
-ENOTSUPP.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 include/linux/pm_opp.h | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 5b6ad31403a5..a2df8f6fcc25 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -110,25 +110,25 @@ static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev)
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 					unsigned long freq, bool available)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					unsigned long *freq)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 					unsigned long *freq)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline int dev_pm_opp_add(struct device *dev, unsigned long freq,
 					unsigned long u_volt)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq)
@@ -148,40 +148,40 @@ static inline int dev_pm_opp_disable(struct device *dev, unsigned long freq)
 static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 							struct device *dev)
 {
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOTSUPP);
 }
 
 static inline int dev_pm_opp_set_supported_hw(struct device *dev,
 					      const u32 *versions,
 					      unsigned int count)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
 
 static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
 
 static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_put_regulator(struct device *dev) {}
 
 static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
-	return -ENOSYS;
+	return -ENOTSUPP;
 }
 
 #endif		/* CONFIG_PM_OPP */
@@ -195,7 +195,7 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask
 #else
 static inline int dev_pm_opp_of_add_table(struct device *dev)
 {
-	return -EINVAL;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_of_remove_table(struct device *dev)
@@ -204,7 +204,7 @@ static inline void dev_pm_opp_of_remove_table(struct device *dev)
 
 static inline int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
 {
-	return -ENOSYS;
+	return -ENOTSUPP;
 }
 
 static inline void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
@@ -213,7 +213,7 @@ static inline void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
 
 static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
-	return -ENOSYS;
+	return -ENOTSUPP;
 }
 #endif
 
-- 
2.7.1.410.g6faf27b

Re: [PATCH V2 1/7] PM / OPP: -ENOSYS is applicable only to syscalls

[Stephen Boyd]

On 04/27, Viresh Kumar wrote:
> Some of the routines have used -ENOSYS for the cases where the
> functionality isn't implemented in the kernel. But ENOSYS is supposed to
> be used only for syscalls.
> 
> Replace that with -ENOTSUPP, which specifically means that the operation
> isn't supported.
> 
> While at it, replace exiting -EINVAL errors for similar cases to
> -ENOTSUPP.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V2 2/7] PM / OPP: Mark cpumask as const in dev_pm_opp_set_sharing_cpus()

[Viresh Kumar]

dev_pm_opp_set_sharing_cpus() isn't supposed to update the cpumask
passed as its parameter, and so it should always have been marked
'const'.

Do it now.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/cpu.c | 3 ++-
 include/linux/pm_opp.h       | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 55cbf9bd8707..5469e7730ff2 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -287,7 +287,8 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev,
+				const cpumask_var_t cpumask)
 {
 	struct opp_device *opp_dev;
 	struct opp_table *opp_table;
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index a2df8f6fcc25..0c08ed3836b1 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -65,7 +65,7 @@ void dev_pm_opp_put_prop_name(struct device *dev);
 int dev_pm_opp_set_regulator(struct device *dev, const char *name);
 void dev_pm_opp_put_regulator(struct device *dev);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const cpumask_var_t cpumask);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -179,7 +179,7 @@ static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_f
 	return -ENOTSUPP;
 }
 
-static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const cpumask_var_t cpumask)
 {
 	return -ENOTSUPP;
 }
-- 
2.7.1.410.g6faf27b

Re: [PATCH V2 2/7] PM / OPP: Mark cpumask as const in dev_pm_opp_set_sharing_cpus()

[Stephen Boyd]

On 04/27, Viresh Kumar wrote:
> dev_pm_opp_set_sharing_cpus() isn't supposed to update the cpumask
> passed as its parameter, and so it should always have been marked
> 'const'.
> 
> Do it now.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

I'm ignoring cpumask_var_t usage.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V2 2/7] PM / OPP: Mark cpumask as const in dev_pm_opp_set_sharing_cpus()

[Viresh Kumar]

On 02-05-16, 17:43, Stephen Boyd wrote:
> On 04/27, Viresh Kumar wrote:
> > dev_pm_opp_set_sharing_cpus() isn't supposed to update the cpumask
> > passed as its parameter, and so it should always have been marked
> > 'const'.
> > 
> > Do it now.
> > 
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> 
> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
> 
> I'm ignoring cpumask_var_t usage.

Yeah, this is already merged by Rafael and Arnd's patch applies over
it.

-- 
viresh

[PATCH V2 3/7] PM / OPP: Add dev_pm_opp_get_sharing_cpus()

[Viresh Kumar]

OPP core allows a platform to mark OPP table as shared, when the
platform isn't using operating-points-v2 bindings.

And, so there should be a non DT way of finding out if the OPP table is
shared or not.

This patch adds dev_pm_opp_get_sharing_cpus(), which first tries to get
OPP sharing information from the opp-table (in case it is already marked
as shared), otherwise it uses the existing DT way of finding sharing
information.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/cpu.c | 45 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h       |  6 ++++++
 2 files changed, 51 insertions(+)

diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 5469e7730ff2..3428380dfca7 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -330,3 +330,48 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev,
 	return ret;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
+
+/**
+ * dev_pm_opp_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with @cpu_dev
+ * @cpu_dev:	CPU device for which we do this operation
+ * @cpumask:	cpumask to update with information of sharing CPUs
+ *
+ * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
+ *
+ * Returns -ENODEV if OPP table isn't already present.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct opp_device *opp_dev;
+	struct opp_table *opp_table;
+	int ret = 0;
+
+	mutex_lock(&opp_table_lock);
+
+	opp_table = _find_opp_table(cpu_dev);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		goto unlock;
+	}
+
+	cpumask_clear(cpumask);
+
+	if (opp_table->shared_opp) {
+		list_for_each_entry(opp_dev, &opp_table->dev_list, node)
+			cpumask_set_cpu(opp_dev->dev->id, cpumask);
+	} else {
+		cpumask_set_cpu(cpu_dev->id, cpumask);
+	}
+
+unlock:
+	mutex_unlock(&opp_table_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 0c08ed3836b1..15f554443b59 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -66,6 +66,7 @@ int dev_pm_opp_set_regulator(struct device *dev, const char *name);
 void dev_pm_opp_put_regulator(struct device *dev);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
 int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const cpumask_var_t cpumask);
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -184,6 +185,11 @@ static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const cpum
 	return -ENOTSUPP;
 }
 
+static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	return -EINVAL;
+}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.7.1.410.g6faf27b

Re: [PATCH V2 3/7] PM / OPP: Add dev_pm_opp_get_sharing_cpus()

[Stephen Boyd]

On 04/27, Viresh Kumar wrote:
> OPP core allows a platform to mark OPP table as shared, when the
> platform isn't using operating-points-v2 bindings.
> 
> And, so there should be a non DT way of finding out if the OPP table is
> shared or not.
> 
> This patch adds dev_pm_opp_get_sharing_cpus(), which first tries to get
> OPP sharing information from the opp-table (in case it is already marked
> as shared), otherwise it uses the existing DT way of finding sharing
> information.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V2 4/7] cpufreq: dt: Identify cpu-sharing for platforms without operating-points-v2

[Viresh Kumar]

Existing platforms, which do not support operating-points-v2, can
explicitly tell the opp core that some of the CPUs share opp tables,
with help of dev_pm_opp_set_sharing_cpus().

For such platforms, explicitly ask the opp core to provide list of CPUs
sharing the opp table with current cpu device, before falling back to
platform data.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 5f8dbe640a20..aca9bec00f91 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -147,7 +147,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
 	unsigned int transition_latency;
-	bool opp_v1 = false;
+	bool fallback = false;
 	const char *name;
 	int ret;
 
@@ -167,14 +167,16 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
+		if (ret != -ENOENT)
+			goto out_put_clk;
+
 		/*
 		 * operating-points-v2 not supported, fallback to old method of
-		 * finding shared-OPPs for backward compatibility.
+		 * finding shared-OPPs for backward compatibility if the
+		 * platform hasn't set sharing CPUs.
 		 */
-		if (ret == -ENOENT)
-			opp_v1 = true;
-		else
-			goto out_put_clk;
+		if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
+			fallback = true;
 	}
 
 	/*
@@ -214,7 +216,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
-	if (opp_v1) {
+	if (fallback) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
 
 		if (!pd || !pd->independent_clocks)
-- 
2.7.1.410.g6faf27b

Re: [PATCH V2 4/7] cpufreq: dt: Identify cpu-sharing for platforms without operating-points-v2

[Stephen Boyd]

On 04/27, Viresh Kumar wrote:
> Existing platforms, which do not support operating-points-v2, can
> explicitly tell the opp core that some of the CPUs share opp tables,
> with help of dev_pm_opp_set_sharing_cpus().
> 
> For such platforms, explicitly ask the opp core to provide list of CPUs
> sharing the opp table with current cpu device, before falling back to
> platform data.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V2 5/7] mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared

[Viresh Kumar]

That will allow us to avoid using cpufreq-dt platform data.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-mvebu/pmsu.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index ed8fda4cd055..8928f7caaf70 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -20,7 +20,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_pm.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -609,10 +608,6 @@ int mvebu_pmsu_dfs_request(int cpu)
 	return 0;
 }
 
-struct cpufreq_dt_platform_data cpufreq_dt_pd = {
-	.independent_clocks = true,
-};
-
 static int __init armada_xp_pmsu_cpufreq_init(void)
 {
 	struct device_node *np;
@@ -683,10 +678,15 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 			clk_put(clk);
 			return ret;
 		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+						  cpumask_of(cpu_dev->id));
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
 	}
 
-	platform_device_register_data(NULL, "cpufreq-dt", -1,
-				      &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 	return 0;
 }
 
-- 
2.7.1.410.g6faf27b

[PATCH V2 5/7] mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared

[Viresh Kumar]

That will allow us to avoid using cpufreq-dt platform data.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-mvebu/pmsu.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index ed8fda4cd055..8928f7caaf70 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -20,7 +20,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_pm.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -609,10 +608,6 @@ int mvebu_pmsu_dfs_request(int cpu)
 	return 0;
 }
 
-struct cpufreq_dt_platform_data cpufreq_dt_pd = {
-	.independent_clocks = true,
-};
-
 static int __init armada_xp_pmsu_cpufreq_init(void)
 {
 	struct device_node *np;
@@ -683,10 +678,15 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 			clk_put(clk);
 			return ret;
 		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+						  cpumask_of(cpu_dev->id));
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
 	}
 
-	platform_device_register_data(NULL, "cpufreq-dt", -1,
-				      &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 	return 0;
 }
 
-- 
2.7.1.410.g6faf27b

Re: [PATCH V2 5/7] mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared

[Stephen Boyd]

On 04/27, Viresh Kumar wrote:
> That will allow us to avoid using cpufreq-dt platform data.
> 
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com>
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V2 5/7] mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared

[Stephen Boyd]

On 04/27, Viresh Kumar wrote:
> That will allow us to avoid using cpufreq-dt platform data.
> 
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com>
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V2 6/7] cpufreq: dt: Kill platform-data

[Viresh Kumar]

There are no more users of platform-data for cpufreq-dt driver, get rid
of it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/cpufreq/cpufreq-dt.c |  6 +-----
 include/linux/cpufreq-dt.h   | 24 ------------------------
 2 files changed, 1 insertion(+), 29 deletions(-)
 delete mode 100644 include/linux/cpufreq-dt.h

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index aca9bec00f91..3957de801ae8 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -15,7 +15,6 @@
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/module.h>
@@ -217,10 +216,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	if (fallback) {
-		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
-
-		if (!pd || !pd->independent_clocks)
-			cpumask_setall(policy->cpus);
+		cpumask_setall(policy->cpus);
 
 		/*
 		 * OPP tables are initialized only for policy->cpu, do it for
diff --git a/include/linux/cpufreq-dt.h b/include/linux/cpufreq-dt.h
deleted file mode 100644
index a87335a1660c..000000000000
--- a/include/linux/cpufreq-dt.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2014 Marvell
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __CPUFREQ_DT_H__
-#define __CPUFREQ_DT_H__
-
-#include <linux/types.h>
-
-struct cpufreq_dt_platform_data {
-	/*
-	 * True when each CPU has its own clock to control its
-	 * frequency, false when all CPUs are controlled by a single
-	 * clock.
-	 */
-	bool independent_clocks;
-};
-
-#endif /* __CPUFREQ_DT_H__ */
-- 
2.7.1.410.g6faf27b

[PATCH V2 7/7] cpufreq: mvebu: Move cpufreq code into drivers/cpufreq/

[Viresh Kumar]

Move cpufreq bits for mvebu into drivers/cpufreq/ directory, that's
where they really belong to.

Compiled tested only.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 MAINTAINERS                     |   1 +
 arch/arm/mach-mvebu/pmsu.c      |  85 -------------------------------
 drivers/cpufreq/Makefile        |   1 +
 drivers/cpufreq/mvebu-cpufreq.c | 107 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 109 insertions(+), 85 deletions(-)
 create mode 100644 drivers/cpufreq/mvebu-cpufreq.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 1d5b4becab6f..0bb566e7df9b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1322,6 +1322,7 @@ F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
 F:	arch/arm64/boot/dts/marvell/armada*
+F:	drivers/cpufreq/mvebu-cpufreq.c
 
 
 ARM/Marvell Berlin SoC support
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 8928f7caaf70..b44442338e4e 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -28,7 +28,6 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
-#include <linux/pm_opp.h>
 #include <linux/resource.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
@@ -607,87 +606,3 @@ int mvebu_pmsu_dfs_request(int cpu)
 
 	return 0;
 }
-
-static int __init armada_xp_pmsu_cpufreq_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	int ret, cpu;
-
-	if (!of_machine_is_compatible("marvell,armadaxp"))
-		return 0;
-
-	/*
-	 * In order to have proper cpufreq handling, we need to ensure
-	 * that the Device Tree description of the CPU clock includes
-	 * the definition of the PMU DFS registers. If not, we do not
-	 * register the clock notifier and the cpufreq driver. This
-	 * piece of code is only for compatibility with old Device
-	 * Trees.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
-	if (!np)
-		return 0;
-
-	ret = of_address_to_resource(np, 1, &res);
-	if (ret) {
-		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
-		of_node_put(np);
-		return 0;
-	}
-
-	of_node_put(np);
-
-	/*
-	 * For each CPU, this loop registers the operating points
-	 * supported (which are the nominal CPU frequency and half of
-	 * it), and registers the clock notifier that will take care
-	 * of doing the PMSU part of a frequency transition.
-	 */
-	for_each_possible_cpu(cpu) {
-		struct device *cpu_dev;
-		struct clk *clk;
-		int ret;
-
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("Cannot get CPU %d\n", cpu);
-			continue;
-		}
-
-		clk = clk_get(cpu_dev, 0);
-		if (IS_ERR(clk)) {
-			pr_err("Cannot get clock for CPU %d\n", cpu);
-			return PTR_ERR(clk);
-		}
-
-		/*
-		 * In case of a failure of dev_pm_opp_add(), we don't
-		 * bother with cleaning up the registered OPP (there's
-		 * no function to do so), and simply cancel the
-		 * registration of the cpufreq device.
-		 */
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-
-		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
-						  cpumask_of(cpu_dev->id));
-		if (ret)
-			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
-				__func__, ret);
-	}
-
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-	return 0;
-}
-
-device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 2cce2cd400f9..e1eb11ee3570 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
 obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 
 
 ##################################################################################
diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c
new file mode 100644
index 000000000000..e920889b9ac2
--- /dev/null
+++ b/drivers/cpufreq/mvebu-cpufreq.c
@@ -0,0 +1,107 @@
+/*
+ * CPUFreq support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012-2016 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/resource.h>
+
+static int __init armada_xp_pmsu_cpufreq_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int ret, cpu;
+
+	if (!of_machine_is_compatible("marvell,armadaxp"))
+		return 0;
+
+	/*
+	 * In order to have proper cpufreq handling, we need to ensure
+	 * that the Device Tree description of the CPU clock includes
+	 * the definition of the PMU DFS registers. If not, we do not
+	 * register the clock notifier and the cpufreq driver. This
+	 * piece of code is only for compatibility with old Device
+	 * Trees.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
+	if (!np)
+		return 0;
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
+		of_node_put(np);
+		return 0;
+	}
+
+	of_node_put(np);
+
+	/*
+	 * For each CPU, this loop registers the operating points
+	 * supported (which are the nominal CPU frequency and half of
+	 * it), and registers the clock notifier that will take care
+	 * of doing the PMSU part of a frequency transition.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev;
+		struct clk *clk;
+		int ret;
+
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("Cannot get CPU %d\n", cpu);
+			continue;
+		}
+
+		clk = clk_get(cpu_dev, 0);
+		if (IS_ERR(clk)) {
+			pr_err("Cannot get clock for CPU %d\n", cpu);
+			return PTR_ERR(clk);
+		}
+
+		/*
+		 * In case of a failure of dev_pm_opp_add(), we don't
+		 * bother with cleaning up the registered OPP (there's
+		 * no function to do so), and simply cancel the
+		 * registration of the cpufreq device.
+		 */
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+						  cpumask_of(cpu_dev->id));
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+	}
+
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	return 0;
+}
+device_initcall(armada_xp_pmsu_cpufreq_init);
-- 
2.7.1.410.g6faf27b

[PATCH V2 7/7] cpufreq: mvebu: Move cpufreq code into drivers/cpufreq/

[Viresh Kumar]

Move cpufreq bits for mvebu into drivers/cpufreq/ directory, that's
where they really belong to.

Compiled tested only.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 MAINTAINERS                     |   1 +
 arch/arm/mach-mvebu/pmsu.c      |  85 -------------------------------
 drivers/cpufreq/Makefile        |   1 +
 drivers/cpufreq/mvebu-cpufreq.c | 107 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 109 insertions(+), 85 deletions(-)
 create mode 100644 drivers/cpufreq/mvebu-cpufreq.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 1d5b4becab6f..0bb566e7df9b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1322,6 +1322,7 @@ F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
 F:	arch/arm64/boot/dts/marvell/armada*
+F:	drivers/cpufreq/mvebu-cpufreq.c
 
 
 ARM/Marvell Berlin SoC support
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 8928f7caaf70..b44442338e4e 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -28,7 +28,6 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
-#include <linux/pm_opp.h>
 #include <linux/resource.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
@@ -607,87 +606,3 @@ int mvebu_pmsu_dfs_request(int cpu)
 
 	return 0;
 }
-
-static int __init armada_xp_pmsu_cpufreq_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	int ret, cpu;
-
-	if (!of_machine_is_compatible("marvell,armadaxp"))
-		return 0;
-
-	/*
-	 * In order to have proper cpufreq handling, we need to ensure
-	 * that the Device Tree description of the CPU clock includes
-	 * the definition of the PMU DFS registers. If not, we do not
-	 * register the clock notifier and the cpufreq driver. This
-	 * piece of code is only for compatibility with old Device
-	 * Trees.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
-	if (!np)
-		return 0;
-
-	ret = of_address_to_resource(np, 1, &res);
-	if (ret) {
-		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
-		of_node_put(np);
-		return 0;
-	}
-
-	of_node_put(np);
-
-	/*
-	 * For each CPU, this loop registers the operating points
-	 * supported (which are the nominal CPU frequency and half of
-	 * it), and registers the clock notifier that will take care
-	 * of doing the PMSU part of a frequency transition.
-	 */
-	for_each_possible_cpu(cpu) {
-		struct device *cpu_dev;
-		struct clk *clk;
-		int ret;
-
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("Cannot get CPU %d\n", cpu);
-			continue;
-		}
-
-		clk = clk_get(cpu_dev, 0);
-		if (IS_ERR(clk)) {
-			pr_err("Cannot get clock for CPU %d\n", cpu);
-			return PTR_ERR(clk);
-		}
-
-		/*
-		 * In case of a failure of dev_pm_opp_add(), we don't
-		 * bother with cleaning up the registered OPP (there's
-		 * no function to do so), and simply cancel the
-		 * registration of the cpufreq device.
-		 */
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-
-		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
-						  cpumask_of(cpu_dev->id));
-		if (ret)
-			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
-				__func__, ret);
-	}
-
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-	return 0;
-}
-
-device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 2cce2cd400f9..e1eb11ee3570 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
 obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 
 
 ##################################################################################
diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c
new file mode 100644
index 000000000000..e920889b9ac2
--- /dev/null
+++ b/drivers/cpufreq/mvebu-cpufreq.c
@@ -0,0 +1,107 @@
+/*
+ * CPUFreq support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012-2016 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/resource.h>
+
+static int __init armada_xp_pmsu_cpufreq_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int ret, cpu;
+
+	if (!of_machine_is_compatible("marvell,armadaxp"))
+		return 0;
+
+	/*
+	 * In order to have proper cpufreq handling, we need to ensure
+	 * that the Device Tree description of the CPU clock includes
+	 * the definition of the PMU DFS registers. If not, we do not
+	 * register the clock notifier and the cpufreq driver. This
+	 * piece of code is only for compatibility with old Device
+	 * Trees.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
+	if (!np)
+		return 0;
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
+		of_node_put(np);
+		return 0;
+	}
+
+	of_node_put(np);
+
+	/*
+	 * For each CPU, this loop registers the operating points
+	 * supported (which are the nominal CPU frequency and half of
+	 * it), and registers the clock notifier that will take care
+	 * of doing the PMSU part of a frequency transition.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev;
+		struct clk *clk;
+		int ret;
+
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("Cannot get CPU %d\n", cpu);
+			continue;
+		}
+
+		clk = clk_get(cpu_dev, 0);
+		if (IS_ERR(clk)) {
+			pr_err("Cannot get clock for CPU %d\n", cpu);
+			return PTR_ERR(clk);
+		}
+
+		/*
+		 * In case of a failure of dev_pm_opp_add(), we don't
+		 * bother with cleaning up the registered OPP (there's
+		 * no function to do so), and simply cancel the
+		 * registration of the cpufreq device.
+		 */
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
+		if (ret) {
+			clk_put(clk);
+			return ret;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+						  cpumask_of(cpu_dev->id));
+		if (ret)
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+	}
+
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	return 0;
+}
+device_initcall(armada_xp_pmsu_cpufreq_init);
-- 
2.7.1.410.g6faf27b

Re: [PATCH V2 0/7] cpufreq: Get rid of cpufreq-dt's platform data

[Arnd Bergmann]

On Wednesday 27 April 2016 08:52:20 Viresh Kumar wrote:
> Hi Guys,
> 
> The aim of the series is to kill the users of cpufreq-dt's platform
> data, i.e. mvebu. And because that required a new API to the OPP core,
> this just became a mix of cpufreq and OPP patches.
> 

Acked-by: Arnd Bergmann <arnd@arndb.de>