From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
Date: Sun, 8 May 2016 20:09:41 +0200 [thread overview]
Message-ID: <20160508180941.GC6167@lukather> (raw)
In-Reply-To: <1462439332-26215-1-git-send-email-oliver@schinagl.nl>
On Thu, May 05, 2016 at 11:08:52AM +0200, Olliver Schinagl wrote:
> There are 3 kinds of OLinuXino Lime2 boards.
> One without any on board storage, one with NAND storage and one with
> eMMC storage. This patch adds the eMMC variant of boards.
>
> eMMC storage is different from a regular SD card in that it is soldered
> on the board and cannot be changed. Additionally, it shares pins with
> the NAND module and with the second SPI port.
>
> Changeslog:
>
> v4:
> Add board compatibles
>
> v3:
> Add pwr-seq-emmc with the reset gpio
>
> v2:
> Remove unsupported no-1.8-v property, add vqmmc property
>
> v1:
> Initial bare bone version
This is not something we want in the commit log. This should go below
the --- so that it's dropped when applied.
Removed and applied.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160508/9683f589/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Tsvetan Usunov <tsvetan-kyXcfZUBQGPQT0dZR+AlfA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
info-kyXcfZUBQGPQT0dZR+AlfA@public.gmane.org,
dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
Date: Sun, 8 May 2016 20:09:41 +0200 [thread overview]
Message-ID: <20160508180941.GC6167@lukather> (raw)
In-Reply-To: <1462439332-26215-1-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 911 bytes --]
On Thu, May 05, 2016 at 11:08:52AM +0200, Olliver Schinagl wrote:
> There are 3 kinds of OLinuXino Lime2 boards.
> One without any on board storage, one with NAND storage and one with
> eMMC storage. This patch adds the eMMC variant of boards.
>
> eMMC storage is different from a regular SD card in that it is soldered
> on the board and cannot be changed. Additionally, it shares pins with
> the NAND module and with the second SPI port.
>
> Changeslog:
>
> v4:
> Add board compatibles
>
> v3:
> Add pwr-seq-emmc with the reset gpio
>
> v2:
> Remove unsupported no-1.8-v property, add vqmmc property
>
> v1:
> Initial bare bone version
This is not something we want in the commit log. This should go below
the --- so that it's dropped when applied.
Removed and applied.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Olliver Schinagl <oliver@schinagl.nl>
Cc: Chen-Yu Tsai <wens@csie.org>, Tsvetan Usunov <tsvetan@olimex.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Hans de Goede <hdegoede@redhat.com>,
info@olimex.com, dev@linux-sunxi.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
Date: Sun, 8 May 2016 20:09:41 +0200 [thread overview]
Message-ID: <20160508180941.GC6167@lukather> (raw)
In-Reply-To: <1462439332-26215-1-git-send-email-oliver@schinagl.nl>
[-- Attachment #1: Type: text/plain, Size: 947 bytes --]
On Thu, May 05, 2016 at 11:08:52AM +0200, Olliver Schinagl wrote:
> There are 3 kinds of OLinuXino Lime2 boards.
> One without any on board storage, one with NAND storage and one with
> eMMC storage. This patch adds the eMMC variant of boards.
>
> eMMC storage is different from a regular SD card in that it is soldered
> on the board and cannot be changed. Additionally, it shares pins with
> the NAND module and with the second SPI port.
>
> Changeslog:
>
> v4:
> Add board compatibles
>
> v3:
> Add pwr-seq-emmc with the reset gpio
>
> v2:
> Remove unsupported no-1.8-v property, add vqmmc property
>
> v1:
> Initial bare bone version
This is not something we want in the commit log. This should go below
the --- so that it's dropped when applied.
Removed and applied.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-05-08 18:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 9:08 [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc Olliver Schinagl
2016-05-05 9:08 ` Olliver Schinagl
2016-05-05 9:08 ` Olliver Schinagl
2016-05-08 18:09 ` Maxime Ripard [this message]
2016-05-08 18:09 ` Maxime Ripard
2016-05-08 18:09 ` Maxime Ripard
2016-05-09 9:53 ` Olliver Schinagl
2016-05-09 9:53 ` Olliver Schinagl
2016-05-09 9:53 ` Olliver Schinagl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160508180941.GC6167@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.