[PATCH 0/2] Add support for Amlogic Meson MMC controller

[carlo@caione.org (Carlo Caione)]

On 20/05/16 11:58, Robert Gadsdon wrote:
> On 05/20/2016 01:07 AM, Carlo Caione wrote:
> > On 20/05/16 08:27, Carlo Caione wrote:
> >> On 19/05/16 21:51, Robert Gadsdon wrote:
> >>> Applied this on my Odroid C2, and it worked OK when installed on the
> >>> SDcard, but failed when installed on the eMMC module:
> > 
> > Oh, reading this again you meant that you put u-boot directly on the
> > eMMC? Ok then, something is wrong when using the driver with the eMMC.
> > 
> 
> Yes, I installed it directly on the eMMC, using the micro-sd adapter,
> and following the same instructions as for the SDcard..

Could you try with this patch?

diff --git a/board/hardkernel/odroid-c2/odroid-c2.c
b/board/hardkernel/odroid-c2/odroid-c2.c
index 34b9a95..ab78328 100644
--- a/board/hardkernel/odroid-c2/odroid-c2.c
+++ b/board/hardkernel/odroid-c2/odroid-c2.c
@@ -80,6 +80,11 @@ U_BOOT_DEVICE(meson_mmc) = {
        .platdata = &gxbb_sd_platdata[CONFIG_MMC_MESON_SD_PORT],
	 };
	  
	  +U_BOOT_DEVICE(meson_emmc) = {
	  +       .name = "meson_mmc",
	  +       .platdata = &gxbb_sd_platdata[2],
	  +};
	  +
	   static void meson_mmc_pinmux_setup(unsigned int port)
	    {
	            switch (port) {

Thanks,

-- 
Carlo Caione