* [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
@ 2016-05-18 14:56 ` Carlo Caione
0 siblings, 0 replies; 24+ messages in thread
From: Carlo Caione @ 2016-05-18 14:56 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-6IF/jdPJHihWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA,
khilman-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM,
arnd-r2nGTMty4D4, jens.wiklander-QSEj5FYQhm4dnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
Cc: Carlo Caione
From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
Introduce a driver to provide calls into secure monitor mode.
In the Amlogic SoCs these calls are used for multiple reasons: access to
NVMEM, set USB boot, enable JTAG, etc...
Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
---
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/meson/Kconfig | 8 ++
drivers/soc/meson/Makefile | 1 +
drivers/soc/meson/meson_sm.c | 155 +++++++++++++++++++++++++++++++++++++
include/linux/soc/meson/meson_sm.h | 22 ++++++
6 files changed, 188 insertions(+)
create mode 100644 drivers/soc/meson/Kconfig
create mode 100644 drivers/soc/meson/Makefile
create mode 100644 drivers/soc/meson/meson_sm.c
create mode 100644 include/linux/soc/meson/meson_sm.h
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index cb58ef0..7e70b52 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -4,6 +4,7 @@ source "drivers/soc/bcm/Kconfig"
source "drivers/soc/brcmstb/Kconfig"
source "drivers/soc/fsl/qe/Kconfig"
source "drivers/soc/mediatek/Kconfig"
+source "drivers/soc/meson/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
source "drivers/soc/samsung/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 5ade713..9024d2b 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
+obj-$(CONFIG_ARCH_MESON) += meson/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
diff --git a/drivers/soc/meson/Kconfig b/drivers/soc/meson/Kconfig
new file mode 100644
index 0000000..fff11a3
--- /dev/null
+++ b/drivers/soc/meson/Kconfig
@@ -0,0 +1,8 @@
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+ bool
+ default ARCH_MESON
+ help
+ Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/soc/meson/Makefile b/drivers/soc/meson/Makefile
new file mode 100644
index 0000000..9ab3884
--- /dev/null
+++ b/drivers/soc/meson/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MESON_SM) += meson_sm.o
diff --git a/drivers/soc/meson/meson_sm.c b/drivers/soc/meson/meson_sm.c
new file mode 100644
index 0000000..16f7e32
--- /dev/null
+++ b/drivers/soc/meson/meson_sm.c
@@ -0,0 +1,155 @@
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdarg.h>
+#include <asm/cacheflush.h>
+#include <asm/compiler.h>
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <linux/soc/meson/meson_sm.h>
+
+#define SM_MEM_SIZE 0x1000
+
+/*
+ * To read from / write to the secure monitor we use two bounce buffers. The
+ * physical addresses of the two buffers are obtained by querying the secure
+ * monitor itself.
+ */
+
+static u32 sm_phy_in_base;
+static u32 sm_phy_out_base;
+
+static void __iomem *sm_sharemem_in_base;
+static void __iomem *sm_sharemem_out_base;
+
+struct meson_sm_data {
+ u32 cmd;
+ u32 arg0;
+ u32 arg1;
+ u32 arg2;
+ u32 arg3;
+ u32 arg4;
+ u32 ret;
+};
+
+static void __meson_sm_call(void *info)
+{
+ struct meson_sm_data *data = info;
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(data->cmd,
+ data->arg0, data->arg1, data->arg2,
+ data->arg3, data->arg4, 0, 0, &res);
+ data->ret = res.a0;
+}
+
+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+ struct meson_sm_data data;
+
+ data.cmd = cmd;
+ data.arg0 = arg0;
+ data.arg1 = arg1;
+ data.arg2 = arg2;
+ data.arg3 = arg3;
+ data.arg4 = arg4;
+ data.ret = 0;
+
+ __meson_sm_call(&data);
+
+ return data.ret;
+}
+
+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
+ u32 arg2, u32 arg3, u32 arg4)
+{
+ u32 size;
+
+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+ if (!size || size > SM_MEM_SIZE)
+ return -EINVAL;
+
+ memcpy(buffer, sm_sharemem_out_base, size);
+ return size;
+}
+
+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
+ u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+ u32 size;
+
+ if (b_size > SM_MEM_SIZE)
+ return -EINVAL;
+
+ memcpy(sm_sharemem_in_base, buffer, b_size);
+
+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+ if (!size)
+ return -EINVAL;
+
+ return size;
+}
+
+static int meson_sm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int cmd_in, cmd_out;
+
+ if (of_property_read_u32(np, "amlogic,sm_cmd_input_base", &cmd_in))
+ return -EINVAL;
+
+ if (of_property_read_u32(np, "amlogic,sm_cmd_output_base", &cmd_out))
+ return -EINVAL;
+
+ sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
+ sm_sharemem_in_base = ioremap_cache(sm_phy_in_base, SM_MEM_SIZE);
+ if (!sm_sharemem_in_base)
+ return -EINVAL;
+
+ sm_phy_out_base = meson_sm_call(cmd_out, 0, 0, 0, 0, 0);
+ sm_sharemem_out_base = ioremap_cache(sm_phy_out_base, SM_MEM_SIZE);
+ if (!sm_sharemem_out_base) {
+ iounmap(sm_sharemem_in_base);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id meson_sm_ids[] = {
+ { .compatible = "amlogic,meson-sm" },
+ { /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, meson_sm_ids);
+
+static struct platform_driver meson_sm_platform_driver = {
+ .probe = meson_sm_probe,
+ .driver = {
+ .name = "secmon",
+ .of_match_table = meson_sm_ids,
+ },
+};
+module_platform_driver(meson_sm_platform_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Amlogic secure monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/soc/meson/meson_sm.h b/include/linux/soc/meson/meson_sm.h
new file mode 100644
index 0000000..6ff8317
--- /dev/null
+++ b/include/linux/soc/meson/meson_sm.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MESON_SM_H_
+#define _MESON_SM_H_
+
+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+ u32 arg3, u32 arg4);
+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
+ u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+
+#endif /* _MESON_SM_H_ */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
@ 2016-05-18 14:56 ` Carlo Caione
0 siblings, 0 replies; 24+ messages in thread
From: Carlo Caione @ 2016-05-18 14:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Carlo Caione <carlo@endlessm.com>
Introduce a driver to provide calls into secure monitor mode.
In the Amlogic SoCs these calls are used for multiple reasons: access to
NVMEM, set USB boot, enable JTAG, etc...
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/meson/Kconfig | 8 ++
drivers/soc/meson/Makefile | 1 +
drivers/soc/meson/meson_sm.c | 155 +++++++++++++++++++++++++++++++++++++
include/linux/soc/meson/meson_sm.h | 22 ++++++
6 files changed, 188 insertions(+)
create mode 100644 drivers/soc/meson/Kconfig
create mode 100644 drivers/soc/meson/Makefile
create mode 100644 drivers/soc/meson/meson_sm.c
create mode 100644 include/linux/soc/meson/meson_sm.h
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index cb58ef0..7e70b52 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -4,6 +4,7 @@ source "drivers/soc/bcm/Kconfig"
source "drivers/soc/brcmstb/Kconfig"
source "drivers/soc/fsl/qe/Kconfig"
source "drivers/soc/mediatek/Kconfig"
+source "drivers/soc/meson/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
source "drivers/soc/samsung/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 5ade713..9024d2b 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
+obj-$(CONFIG_ARCH_MESON) += meson/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
diff --git a/drivers/soc/meson/Kconfig b/drivers/soc/meson/Kconfig
new file mode 100644
index 0000000..fff11a3
--- /dev/null
+++ b/drivers/soc/meson/Kconfig
@@ -0,0 +1,8 @@
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+ bool
+ default ARCH_MESON
+ help
+ Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/soc/meson/Makefile b/drivers/soc/meson/Makefile
new file mode 100644
index 0000000..9ab3884
--- /dev/null
+++ b/drivers/soc/meson/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MESON_SM) += meson_sm.o
diff --git a/drivers/soc/meson/meson_sm.c b/drivers/soc/meson/meson_sm.c
new file mode 100644
index 0000000..16f7e32
--- /dev/null
+++ b/drivers/soc/meson/meson_sm.c
@@ -0,0 +1,155 @@
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdarg.h>
+#include <asm/cacheflush.h>
+#include <asm/compiler.h>
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <linux/soc/meson/meson_sm.h>
+
+#define SM_MEM_SIZE 0x1000
+
+/*
+ * To read from / write to the secure monitor we use two bounce buffers. The
+ * physical addresses of the two buffers are obtained by querying the secure
+ * monitor itself.
+ */
+
+static u32 sm_phy_in_base;
+static u32 sm_phy_out_base;
+
+static void __iomem *sm_sharemem_in_base;
+static void __iomem *sm_sharemem_out_base;
+
+struct meson_sm_data {
+ u32 cmd;
+ u32 arg0;
+ u32 arg1;
+ u32 arg2;
+ u32 arg3;
+ u32 arg4;
+ u32 ret;
+};
+
+static void __meson_sm_call(void *info)
+{
+ struct meson_sm_data *data = info;
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(data->cmd,
+ data->arg0, data->arg1, data->arg2,
+ data->arg3, data->arg4, 0, 0, &res);
+ data->ret = res.a0;
+}
+
+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+ struct meson_sm_data data;
+
+ data.cmd = cmd;
+ data.arg0 = arg0;
+ data.arg1 = arg1;
+ data.arg2 = arg2;
+ data.arg3 = arg3;
+ data.arg4 = arg4;
+ data.ret = 0;
+
+ __meson_sm_call(&data);
+
+ return data.ret;
+}
+
+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
+ u32 arg2, u32 arg3, u32 arg4)
+{
+ u32 size;
+
+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+ if (!size || size > SM_MEM_SIZE)
+ return -EINVAL;
+
+ memcpy(buffer, sm_sharemem_out_base, size);
+ return size;
+}
+
+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
+ u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+ u32 size;
+
+ if (b_size > SM_MEM_SIZE)
+ return -EINVAL;
+
+ memcpy(sm_sharemem_in_base, buffer, b_size);
+
+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+ if (!size)
+ return -EINVAL;
+
+ return size;
+}
+
+static int meson_sm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int cmd_in, cmd_out;
+
+ if (of_property_read_u32(np, "amlogic,sm_cmd_input_base", &cmd_in))
+ return -EINVAL;
+
+ if (of_property_read_u32(np, "amlogic,sm_cmd_output_base", &cmd_out))
+ return -EINVAL;
+
+ sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
+ sm_sharemem_in_base = ioremap_cache(sm_phy_in_base, SM_MEM_SIZE);
+ if (!sm_sharemem_in_base)
+ return -EINVAL;
+
+ sm_phy_out_base = meson_sm_call(cmd_out, 0, 0, 0, 0, 0);
+ sm_sharemem_out_base = ioremap_cache(sm_phy_out_base, SM_MEM_SIZE);
+ if (!sm_sharemem_out_base) {
+ iounmap(sm_sharemem_in_base);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id meson_sm_ids[] = {
+ { .compatible = "amlogic,meson-sm" },
+ { /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, meson_sm_ids);
+
+static struct platform_driver meson_sm_platform_driver = {
+ .probe = meson_sm_probe,
+ .driver = {
+ .name = "secmon",
+ .of_match_table = meson_sm_ids,
+ },
+};
+module_platform_driver(meson_sm_platform_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
+MODULE_DESCRIPTION("Amlogic secure monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/soc/meson/meson_sm.h b/include/linux/soc/meson/meson_sm.h
new file mode 100644
index 0000000..6ff8317
--- /dev/null
+++ b/include/linux/soc/meson/meson_sm.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MESON_SM_H_
+#define _MESON_SM_H_
+
+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+ u32 arg3, u32 arg4);
+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
+ u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+
+#endif /* _MESON_SM_H_ */
--
2.7.4
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
2016-05-18 14:56 ` Carlo Caione
(?)
@ 2016-05-23 11:38 ` Matthias Brugger
-1 siblings, 0 replies; 24+ messages in thread
From: Matthias Brugger @ 2016-05-23 11:38 UTC (permalink / raw)
To: linus-amlogic
On 18/05/16 16:56, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> Introduce a driver to provide calls into secure monitor mode.
>
> In the Amlogic SoCs these calls are used for multiple reasons: access to
> NVMEM, set USB boot, enable JTAG, etc...
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/meson/Kconfig | 8 ++
> drivers/soc/meson/Makefile | 1 +
> drivers/soc/meson/meson_sm.c | 155 +++++++++++++++++++++++++++++++++++++
> include/linux/soc/meson/meson_sm.h | 22 ++++++
> 6 files changed, 188 insertions(+)
> create mode 100644 drivers/soc/meson/Kconfig
> create mode 100644 drivers/soc/meson/Makefile
> create mode 100644 drivers/soc/meson/meson_sm.c
> create mode 100644 include/linux/soc/meson/meson_sm.h
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index cb58ef0..7e70b52 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -4,6 +4,7 @@ source "drivers/soc/bcm/Kconfig"
> source "drivers/soc/brcmstb/Kconfig"
> source "drivers/soc/fsl/qe/Kconfig"
> source "drivers/soc/mediatek/Kconfig"
> +source "drivers/soc/meson/Kconfig"
> source "drivers/soc/qcom/Kconfig"
> source "drivers/soc/rockchip/Kconfig"
> source "drivers/soc/samsung/Kconfig"
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 5ade713..9024d2b 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_DOVE) += dove/
> obj-$(CONFIG_MACH_DOVE) += dove/
> obj-y += fsl/
> obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
> +obj-$(CONFIG_ARCH_MESON) += meson/
> obj-$(CONFIG_ARCH_QCOM) += qcom/
> obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
> obj-$(CONFIG_SOC_SAMSUNG) += samsung/
> diff --git a/drivers/soc/meson/Kconfig b/drivers/soc/meson/Kconfig
> new file mode 100644
> index 0000000..fff11a3
> --- /dev/null
> +++ b/drivers/soc/meson/Kconfig
> @@ -0,0 +1,8 @@
> +#
> +# Amlogic Secure Monitor driver
> +#
> +config MESON_SM
> + bool
> + default ARCH_MESON
> + help
> + Say y here to enable the Amlogic secure monitor driver
> diff --git a/drivers/soc/meson/Makefile b/drivers/soc/meson/Makefile
> new file mode 100644
> index 0000000..9ab3884
> --- /dev/null
> +++ b/drivers/soc/meson/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MESON_SM) += meson_sm.o
> diff --git a/drivers/soc/meson/meson_sm.c b/drivers/soc/meson/meson_sm.c
> new file mode 100644
> index 0000000..16f7e32
> --- /dev/null
> +++ b/drivers/soc/meson/meson_sm.c
> @@ -0,0 +1,155 @@
> +/*
> + * Amlogic Secure Monitor driver
> + *
> + * Copyright (C) 2016 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <stdarg.h>
> +#include <asm/cacheflush.h>
> +#include <asm/compiler.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/smp.h>
> +
> +#include <linux/soc/meson/meson_sm.h>
> +
> +#define SM_MEM_SIZE 0x1000
> +
> +/*
> + * To read from / write to the secure monitor we use two bounce buffers. The
> + * physical addresses of the two buffers are obtained by querying the secure
> + * monitor itself.
> + */
> +
> +static u32 sm_phy_in_base;
> +static u32 sm_phy_out_base;
You can put this two variable in meson_sm_probe, right?
> +
> +static void __iomem *sm_sharemem_in_base;
> +static void __iomem *sm_sharemem_out_base;
> +
> +struct meson_sm_data {
> + u32 cmd;
> + u32 arg0;
> + u32 arg1;
> + u32 arg2;
> + u32 arg3;
> + u32 arg4;
> + u32 ret;
> +};
> +
> +static void __meson_sm_call(void *info)
> +{
> + struct meson_sm_data *data = info;
> + struct arm_smccc_res res;
> +
> + arm_smccc_smc(data->cmd,
> + data->arg0, data->arg1, data->arg2,
> + data->arg3, data->arg4, 0, 0, &res);
> + data->ret = res.a0;
> +}
> +
> +u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
Can the function be static or will it be called from another driver?
> +{
> + struct meson_sm_data data;
> +
> + data.cmd = cmd;
> + data.arg0 = arg0;
> + data.arg1 = arg1;
> + data.arg2 = arg2;
> + data.arg3 = arg3;
> + data.arg4 = arg4;
> + data.ret = 0;
> +
> + __meson_sm_call(&data);
> +
> + return data.ret;
> +}
> +
> +u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
> + u32 arg2, u32 arg3, u32 arg4)
> +{
> + u32 size;
> +
> + size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> +
> + if (!size || size > SM_MEM_SIZE)
> + return -EINVAL;
> +
> + memcpy(buffer, sm_sharemem_out_base, size);
> + return size;
> +}
This function will be needed to be exported to be callable from modules.
> +
> +u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> + u32 arg1, u32 arg2, u32 arg3, u32 arg4)
> +{
> + u32 size;
> +
> + if (b_size > SM_MEM_SIZE)
> + return -EINVAL;
> +
> + memcpy(sm_sharemem_in_base, buffer, b_size);
> +
> + size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> +
> + if (!size)
> + return -EINVAL;
> +
> + return size;
> +}
> +
Same here.
Regards,
Matthias
> +static int meson_sm_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + int cmd_in, cmd_out;
> +
> + if (of_property_read_u32(np, "amlogic,sm_cmd_input_base", &cmd_in))
> + return -EINVAL;
> +
> + if (of_property_read_u32(np, "amlogic,sm_cmd_output_base", &cmd_out))
> + return -EINVAL;
> +
> + sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
> + sm_sharemem_in_base = ioremap_cache(sm_phy_in_base, SM_MEM_SIZE);
> + if (!sm_sharemem_in_base)
> + return -EINVAL;
> +
> + sm_phy_out_base = meson_sm_call(cmd_out, 0, 0, 0, 0, 0);
> + sm_sharemem_out_base = ioremap_cache(sm_phy_out_base, SM_MEM_SIZE);
> + if (!sm_sharemem_out_base) {
> + iounmap(sm_sharemem_in_base);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_sm_ids[] = {
> + { .compatible = "amlogic,meson-sm" },
> + { /* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, meson_sm_ids);
> +
> +static struct platform_driver meson_sm_platform_driver = {
> + .probe = meson_sm_probe,
> + .driver = {
> + .name = "secmon",
> + .of_match_table = meson_sm_ids,
> + },
> +};
> +module_platform_driver(meson_sm_platform_driver);
> +
> +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
> +MODULE_DESCRIPTION("Amlogic secure monitor driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/soc/meson/meson_sm.h b/include/linux/soc/meson/meson_sm.h
> new file mode 100644
> index 0000000..6ff8317
> --- /dev/null
> +++ b/include/linux/soc/meson/meson_sm.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (C) 2016 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _MESON_SM_H_
> +#define _MESON_SM_H_
> +
> +u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> +u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1, u32 arg2,
> + u32 arg3, u32 arg4);
> +u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> + u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> +
> +#endif /* _MESON_SM_H_ */
>
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
@ 2016-05-23 11:38 ` Matthias Brugger
0 siblings, 0 replies; 24+ messages in thread
From: Matthias Brugger @ 2016-05-23 11:38 UTC (permalink / raw)
To: Carlo Caione, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-6IF/jdPJHihWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA,
khilman-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM,
arnd-r2nGTMty4D4, jens.wiklander-QSEj5FYQhm4dnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
Cc: Carlo Caione
On 18/05/16 16:56, Carlo Caione wrote:
> From: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
>
> Introduce a driver to provide calls into secure monitor mode.
>
> In the Amlogic SoCs these calls are used for multiple reasons: access to
> NVMEM, set USB boot, enable JTAG, etc...
>
> Signed-off-by: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/meson/Kconfig | 8 ++
> drivers/soc/meson/Makefile | 1 +
> drivers/soc/meson/meson_sm.c | 155 +++++++++++++++++++++++++++++++++++++
> include/linux/soc/meson/meson_sm.h | 22 ++++++
> 6 files changed, 188 insertions(+)
> create mode 100644 drivers/soc/meson/Kconfig
> create mode 100644 drivers/soc/meson/Makefile
> create mode 100644 drivers/soc/meson/meson_sm.c
> create mode 100644 include/linux/soc/meson/meson_sm.h
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index cb58ef0..7e70b52 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -4,6 +4,7 @@ source "drivers/soc/bcm/Kconfig"
> source "drivers/soc/brcmstb/Kconfig"
> source "drivers/soc/fsl/qe/Kconfig"
> source "drivers/soc/mediatek/Kconfig"
> +source "drivers/soc/meson/Kconfig"
> source "drivers/soc/qcom/Kconfig"
> source "drivers/soc/rockchip/Kconfig"
> source "drivers/soc/samsung/Kconfig"
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 5ade713..9024d2b 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_DOVE) += dove/
> obj-$(CONFIG_MACH_DOVE) += dove/
> obj-y += fsl/
> obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
> +obj-$(CONFIG_ARCH_MESON) += meson/
> obj-$(CONFIG_ARCH_QCOM) += qcom/
> obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
> obj-$(CONFIG_SOC_SAMSUNG) += samsung/
> diff --git a/drivers/soc/meson/Kconfig b/drivers/soc/meson/Kconfig
> new file mode 100644
> index 0000000..fff11a3
> --- /dev/null
> +++ b/drivers/soc/meson/Kconfig
> @@ -0,0 +1,8 @@
> +#
> +# Amlogic Secure Monitor driver
> +#
> +config MESON_SM
> + bool
> + default ARCH_MESON
> + help
> + Say y here to enable the Amlogic secure monitor driver
> diff --git a/drivers/soc/meson/Makefile b/drivers/soc/meson/Makefile
> new file mode 100644
> index 0000000..9ab3884
> --- /dev/null
> +++ b/drivers/soc/meson/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MESON_SM) += meson_sm.o
> diff --git a/drivers/soc/meson/meson_sm.c b/drivers/soc/meson/meson_sm.c
> new file mode 100644
> index 0000000..16f7e32
> --- /dev/null
> +++ b/drivers/soc/meson/meson_sm.c
> @@ -0,0 +1,155 @@
> +/*
> + * Amlogic Secure Monitor driver
> + *
> + * Copyright (C) 2016 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <stdarg.h>
> +#include <asm/cacheflush.h>
> +#include <asm/compiler.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/smp.h>
> +
> +#include <linux/soc/meson/meson_sm.h>
> +
> +#define SM_MEM_SIZE 0x1000
> +
> +/*
> + * To read from / write to the secure monitor we use two bounce buffers. The
> + * physical addresses of the two buffers are obtained by querying the secure
> + * monitor itself.
> + */
> +
> +static u32 sm_phy_in_base;
> +static u32 sm_phy_out_base;
You can put this two variable in meson_sm_probe, right?
> +
> +static void __iomem *sm_sharemem_in_base;
> +static void __iomem *sm_sharemem_out_base;
> +
> +struct meson_sm_data {
> + u32 cmd;
> + u32 arg0;
> + u32 arg1;
> + u32 arg2;
> + u32 arg3;
> + u32 arg4;
> + u32 ret;
> +};
> +
> +static void __meson_sm_call(void *info)
> +{
> + struct meson_sm_data *data = info;
> + struct arm_smccc_res res;
> +
> + arm_smccc_smc(data->cmd,
> + data->arg0, data->arg1, data->arg2,
> + data->arg3, data->arg4, 0, 0, &res);
> + data->ret = res.a0;
> +}
> +
> +u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
Can the function be static or will it be called from another driver?
> +{
> + struct meson_sm_data data;
> +
> + data.cmd = cmd;
> + data.arg0 = arg0;
> + data.arg1 = arg1;
> + data.arg2 = arg2;
> + data.arg3 = arg3;
> + data.arg4 = arg4;
> + data.ret = 0;
> +
> + __meson_sm_call(&data);
> +
> + return data.ret;
> +}
> +
> +u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
> + u32 arg2, u32 arg3, u32 arg4)
> +{
> + u32 size;
> +
> + size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> +
> + if (!size || size > SM_MEM_SIZE)
> + return -EINVAL;
> +
> + memcpy(buffer, sm_sharemem_out_base, size);
> + return size;
> +}
This function will be needed to be exported to be callable from modules.
> +
> +u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> + u32 arg1, u32 arg2, u32 arg3, u32 arg4)
> +{
> + u32 size;
> +
> + if (b_size > SM_MEM_SIZE)
> + return -EINVAL;
> +
> + memcpy(sm_sharemem_in_base, buffer, b_size);
> +
> + size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> +
> + if (!size)
> + return -EINVAL;
> +
> + return size;
> +}
> +
Same here.
Regards,
Matthias
> +static int meson_sm_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + int cmd_in, cmd_out;
> +
> + if (of_property_read_u32(np, "amlogic,sm_cmd_input_base", &cmd_in))
> + return -EINVAL;
> +
> + if (of_property_read_u32(np, "amlogic,sm_cmd_output_base", &cmd_out))
> + return -EINVAL;
> +
> + sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
> + sm_sharemem_in_base = ioremap_cache(sm_phy_in_base, SM_MEM_SIZE);
> + if (!sm_sharemem_in_base)
> + return -EINVAL;
> +
> + sm_phy_out_base = meson_sm_call(cmd_out, 0, 0, 0, 0, 0);
> + sm_sharemem_out_base = ioremap_cache(sm_phy_out_base, SM_MEM_SIZE);
> + if (!sm_sharemem_out_base) {
> + iounmap(sm_sharemem_in_base);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_sm_ids[] = {
> + { .compatible = "amlogic,meson-sm" },
> + { /* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, meson_sm_ids);
> +
> +static struct platform_driver meson_sm_platform_driver = {
> + .probe = meson_sm_probe,
> + .driver = {
> + .name = "secmon",
> + .of_match_table = meson_sm_ids,
> + },
> +};
> +module_platform_driver(meson_sm_platform_driver);
> +
> +MODULE_AUTHOR("Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>");
> +MODULE_DESCRIPTION("Amlogic secure monitor driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/soc/meson/meson_sm.h b/include/linux/soc/meson/meson_sm.h
> new file mode 100644
> index 0000000..6ff8317
> --- /dev/null
> +++ b/include/linux/soc/meson/meson_sm.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (C) 2016 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo-6IF/jdPJHihWk0Htik3J/w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _MESON_SM_H_
> +#define _MESON_SM_H_
> +
> +u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> +u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1, u32 arg2,
> + u32 arg3, u32 arg4);
> +u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> + u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> +
> +#endif /* _MESON_SM_H_ */
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
@ 2016-05-23 11:38 ` Matthias Brugger
0 siblings, 0 replies; 24+ messages in thread
From: Matthias Brugger @ 2016-05-23 11:38 UTC (permalink / raw)
To: linux-arm-kernel
On 18/05/16 16:56, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> Introduce a driver to provide calls into secure monitor mode.
>
> In the Amlogic SoCs these calls are used for multiple reasons: access to
> NVMEM, set USB boot, enable JTAG, etc...
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/meson/Kconfig | 8 ++
> drivers/soc/meson/Makefile | 1 +
> drivers/soc/meson/meson_sm.c | 155 +++++++++++++++++++++++++++++++++++++
> include/linux/soc/meson/meson_sm.h | 22 ++++++
> 6 files changed, 188 insertions(+)
> create mode 100644 drivers/soc/meson/Kconfig
> create mode 100644 drivers/soc/meson/Makefile
> create mode 100644 drivers/soc/meson/meson_sm.c
> create mode 100644 include/linux/soc/meson/meson_sm.h
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index cb58ef0..7e70b52 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -4,6 +4,7 @@ source "drivers/soc/bcm/Kconfig"
> source "drivers/soc/brcmstb/Kconfig"
> source "drivers/soc/fsl/qe/Kconfig"
> source "drivers/soc/mediatek/Kconfig"
> +source "drivers/soc/meson/Kconfig"
> source "drivers/soc/qcom/Kconfig"
> source "drivers/soc/rockchip/Kconfig"
> source "drivers/soc/samsung/Kconfig"
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 5ade713..9024d2b 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_DOVE) += dove/
> obj-$(CONFIG_MACH_DOVE) += dove/
> obj-y += fsl/
> obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
> +obj-$(CONFIG_ARCH_MESON) += meson/
> obj-$(CONFIG_ARCH_QCOM) += qcom/
> obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
> obj-$(CONFIG_SOC_SAMSUNG) += samsung/
> diff --git a/drivers/soc/meson/Kconfig b/drivers/soc/meson/Kconfig
> new file mode 100644
> index 0000000..fff11a3
> --- /dev/null
> +++ b/drivers/soc/meson/Kconfig
> @@ -0,0 +1,8 @@
> +#
> +# Amlogic Secure Monitor driver
> +#
> +config MESON_SM
> + bool
> + default ARCH_MESON
> + help
> + Say y here to enable the Amlogic secure monitor driver
> diff --git a/drivers/soc/meson/Makefile b/drivers/soc/meson/Makefile
> new file mode 100644
> index 0000000..9ab3884
> --- /dev/null
> +++ b/drivers/soc/meson/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MESON_SM) += meson_sm.o
> diff --git a/drivers/soc/meson/meson_sm.c b/drivers/soc/meson/meson_sm.c
> new file mode 100644
> index 0000000..16f7e32
> --- /dev/null
> +++ b/drivers/soc/meson/meson_sm.c
> @@ -0,0 +1,155 @@
> +/*
> + * Amlogic Secure Monitor driver
> + *
> + * Copyright (C) 2016 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <stdarg.h>
> +#include <asm/cacheflush.h>
> +#include <asm/compiler.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/smp.h>
> +
> +#include <linux/soc/meson/meson_sm.h>
> +
> +#define SM_MEM_SIZE 0x1000
> +
> +/*
> + * To read from / write to the secure monitor we use two bounce buffers. The
> + * physical addresses of the two buffers are obtained by querying the secure
> + * monitor itself.
> + */
> +
> +static u32 sm_phy_in_base;
> +static u32 sm_phy_out_base;
You can put this two variable in meson_sm_probe, right?
> +
> +static void __iomem *sm_sharemem_in_base;
> +static void __iomem *sm_sharemem_out_base;
> +
> +struct meson_sm_data {
> + u32 cmd;
> + u32 arg0;
> + u32 arg1;
> + u32 arg2;
> + u32 arg3;
> + u32 arg4;
> + u32 ret;
> +};
> +
> +static void __meson_sm_call(void *info)
> +{
> + struct meson_sm_data *data = info;
> + struct arm_smccc_res res;
> +
> + arm_smccc_smc(data->cmd,
> + data->arg0, data->arg1, data->arg2,
> + data->arg3, data->arg4, 0, 0, &res);
> + data->ret = res.a0;
> +}
> +
> +u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
Can the function be static or will it be called from another driver?
> +{
> + struct meson_sm_data data;
> +
> + data.cmd = cmd;
> + data.arg0 = arg0;
> + data.arg1 = arg1;
> + data.arg2 = arg2;
> + data.arg3 = arg3;
> + data.arg4 = arg4;
> + data.ret = 0;
> +
> + __meson_sm_call(&data);
> +
> + return data.ret;
> +}
> +
> +u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
> + u32 arg2, u32 arg3, u32 arg4)
> +{
> + u32 size;
> +
> + size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> +
> + if (!size || size > SM_MEM_SIZE)
> + return -EINVAL;
> +
> + memcpy(buffer, sm_sharemem_out_base, size);
> + return size;
> +}
This function will be needed to be exported to be callable from modules.
> +
> +u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> + u32 arg1, u32 arg2, u32 arg3, u32 arg4)
> +{
> + u32 size;
> +
> + if (b_size > SM_MEM_SIZE)
> + return -EINVAL;
> +
> + memcpy(sm_sharemem_in_base, buffer, b_size);
> +
> + size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> +
> + if (!size)
> + return -EINVAL;
> +
> + return size;
> +}
> +
Same here.
Regards,
Matthias
> +static int meson_sm_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + int cmd_in, cmd_out;
> +
> + if (of_property_read_u32(np, "amlogic,sm_cmd_input_base", &cmd_in))
> + return -EINVAL;
> +
> + if (of_property_read_u32(np, "amlogic,sm_cmd_output_base", &cmd_out))
> + return -EINVAL;
> +
> + sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
> + sm_sharemem_in_base = ioremap_cache(sm_phy_in_base, SM_MEM_SIZE);
> + if (!sm_sharemem_in_base)
> + return -EINVAL;
> +
> + sm_phy_out_base = meson_sm_call(cmd_out, 0, 0, 0, 0, 0);
> + sm_sharemem_out_base = ioremap_cache(sm_phy_out_base, SM_MEM_SIZE);
> + if (!sm_sharemem_out_base) {
> + iounmap(sm_sharemem_in_base);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_sm_ids[] = {
> + { .compatible = "amlogic,meson-sm" },
> + { /* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, meson_sm_ids);
> +
> +static struct platform_driver meson_sm_platform_driver = {
> + .probe = meson_sm_probe,
> + .driver = {
> + .name = "secmon",
> + .of_match_table = meson_sm_ids,
> + },
> +};
> +module_platform_driver(meson_sm_platform_driver);
> +
> +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
> +MODULE_DESCRIPTION("Amlogic secure monitor driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/soc/meson/meson_sm.h b/include/linux/soc/meson/meson_sm.h
> new file mode 100644
> index 0000000..6ff8317
> --- /dev/null
> +++ b/include/linux/soc/meson/meson_sm.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (C) 2016 Endless Mobile, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _MESON_SM_H_
> +#define _MESON_SM_H_
> +
> +u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> +u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1, u32 arg2,
> + u32 arg3, u32 arg4);
> +u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> + u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> +
> +#endif /* _MESON_SM_H_ */
>
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
2016-05-23 11:38 ` Matthias Brugger
(?)
@ 2016-05-23 11:43 ` Carlo Caione
-1 siblings, 0 replies; 24+ messages in thread
From: Carlo Caione @ 2016-05-23 11:43 UTC (permalink / raw)
To: linus-amlogic
On 23/05/16 13:38, Matthias Brugger wrote:
>
[...]
> >+#include <stdarg.h>
> >+#include <asm/cacheflush.h>
> >+#include <asm/compiler.h>
> >+#include <linux/arm-smccc.h>
> >+#include <linux/io.h>
> >+#include <linux/ioport.h>
> >+#include <linux/module.h>
> >+#include <linux/platform_device.h>
> >+#include <linux/of.h>
> >+#include <linux/smp.h>
> >+
> >+#include <linux/soc/meson/meson_sm.h>
> >+
> >+#define SM_MEM_SIZE 0x1000
> >+
> >+/*
> >+ * To read from / write to the secure monitor we use two bounce buffers. The
> >+ * physical addresses of the two buffers are obtained by querying the secure
> >+ * monitor itself.
> >+ */
> >+
> >+static u32 sm_phy_in_base;
> >+static u32 sm_phy_out_base;
>
> You can put this two variable in meson_sm_probe, right?
Yeah, actually no need to be there.
> >+
> >+static void __iomem *sm_sharemem_in_base;
> >+static void __iomem *sm_sharemem_out_base;
> >+
> >+struct meson_sm_data {
> >+ u32 cmd;
> >+ u32 arg0;
> >+ u32 arg1;
> >+ u32 arg2;
> >+ u32 arg3;
> >+ u32 arg4;
> >+ u32 ret;
> >+};
> >+
> >+static void __meson_sm_call(void *info)
> >+{
> >+ struct meson_sm_data *data = info;
> >+ struct arm_smccc_res res;
> >+
> >+ arm_smccc_smc(data->cmd,
> >+ data->arg0, data->arg1, data->arg2,
> >+ data->arg3, data->arg4, 0, 0, &res);
> >+ data->ret = res.a0;
> >+}
> >+
> >+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
>
> Can the function be static or will it be called from another driver?
It _can_ be called from another driver. It depends on the SMC used, so
better making it available.
>
> >+{
> >+ struct meson_sm_data data;
> >+
> >+ data.cmd = cmd;
> >+ data.arg0 = arg0;
> >+ data.arg1 = arg1;
> >+ data.arg2 = arg2;
> >+ data.arg3 = arg3;
> >+ data.arg4 = arg4;
> >+ data.ret = 0;
> >+
> >+ __meson_sm_call(&data);
> >+
> >+ return data.ret;
> >+}
> >+
> >+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
> >+ u32 arg2, u32 arg3, u32 arg4)
> >+{
> >+ u32 size;
> >+
> >+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> >+
> >+ if (!size || size > SM_MEM_SIZE)
> >+ return -EINVAL;
> >+
> >+ memcpy(buffer, sm_sharemem_out_base, size);
> >+ return size;
> >+}
>
> This function will be needed to be exported to be callable from modules.
Fix in v3.
> >+
> >+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> >+ u32 arg1, u32 arg2, u32 arg3, u32 arg4)
> >+{
> >+ u32 size;
> >+
> >+ if (b_size > SM_MEM_SIZE)
> >+ return -EINVAL;
> >+
> >+ memcpy(sm_sharemem_in_base, buffer, b_size);
> >+
> >+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> >+
> >+ if (!size)
> >+ return -EINVAL;
> >+
> >+ return size;
> >+}
> >+
>
> Same here.
Thanks.
Cheers,
--
Carlo Caione
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
@ 2016-05-23 11:43 ` Carlo Caione
0 siblings, 0 replies; 24+ messages in thread
From: Carlo Caione @ 2016-05-23 11:43 UTC (permalink / raw)
To: Matthias Brugger
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-6IF/jdPJHihWk0Htik3J/w, devicetree-u79uwXL29TY76Z2rM5mHXA,
khilman-rdvid1DuHRBWk0Htik3J/w, afaerber-l3A5Bk7waGM,
arnd-r2nGTMty4D4, jens.wiklander-QSEj5FYQhm4dnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
On 23/05/16 13:38, Matthias Brugger wrote:
>
[...]
> >+#include <stdarg.h>
> >+#include <asm/cacheflush.h>
> >+#include <asm/compiler.h>
> >+#include <linux/arm-smccc.h>
> >+#include <linux/io.h>
> >+#include <linux/ioport.h>
> >+#include <linux/module.h>
> >+#include <linux/platform_device.h>
> >+#include <linux/of.h>
> >+#include <linux/smp.h>
> >+
> >+#include <linux/soc/meson/meson_sm.h>
> >+
> >+#define SM_MEM_SIZE 0x1000
> >+
> >+/*
> >+ * To read from / write to the secure monitor we use two bounce buffers. The
> >+ * physical addresses of the two buffers are obtained by querying the secure
> >+ * monitor itself.
> >+ */
> >+
> >+static u32 sm_phy_in_base;
> >+static u32 sm_phy_out_base;
>
> You can put this two variable in meson_sm_probe, right?
Yeah, actually no need to be there.
> >+
> >+static void __iomem *sm_sharemem_in_base;
> >+static void __iomem *sm_sharemem_out_base;
> >+
> >+struct meson_sm_data {
> >+ u32 cmd;
> >+ u32 arg0;
> >+ u32 arg1;
> >+ u32 arg2;
> >+ u32 arg3;
> >+ u32 arg4;
> >+ u32 ret;
> >+};
> >+
> >+static void __meson_sm_call(void *info)
> >+{
> >+ struct meson_sm_data *data = info;
> >+ struct arm_smccc_res res;
> >+
> >+ arm_smccc_smc(data->cmd,
> >+ data->arg0, data->arg1, data->arg2,
> >+ data->arg3, data->arg4, 0, 0, &res);
> >+ data->ret = res.a0;
> >+}
> >+
> >+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
>
> Can the function be static or will it be called from another driver?
It _can_ be called from another driver. It depends on the SMC used, so
better making it available.
>
> >+{
> >+ struct meson_sm_data data;
> >+
> >+ data.cmd = cmd;
> >+ data.arg0 = arg0;
> >+ data.arg1 = arg1;
> >+ data.arg2 = arg2;
> >+ data.arg3 = arg3;
> >+ data.arg4 = arg4;
> >+ data.ret = 0;
> >+
> >+ __meson_sm_call(&data);
> >+
> >+ return data.ret;
> >+}
> >+
> >+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
> >+ u32 arg2, u32 arg3, u32 arg4)
> >+{
> >+ u32 size;
> >+
> >+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> >+
> >+ if (!size || size > SM_MEM_SIZE)
> >+ return -EINVAL;
> >+
> >+ memcpy(buffer, sm_sharemem_out_base, size);
> >+ return size;
> >+}
>
> This function will be needed to be exported to be callable from modules.
Fix in v3.
> >+
> >+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> >+ u32 arg1, u32 arg2, u32 arg3, u32 arg4)
> >+{
> >+ u32 size;
> >+
> >+ if (b_size > SM_MEM_SIZE)
> >+ return -EINVAL;
> >+
> >+ memcpy(sm_sharemem_in_base, buffer, b_size);
> >+
> >+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> >+
> >+ if (!size)
> >+ return -EINVAL;
> >+
> >+ return size;
> >+}
> >+
>
> Same here.
Thanks.
Cheers,
--
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 24+ messages in thread* [PATCH v2 1/4] soc: Amlogic: Add secure monitor driver
@ 2016-05-23 11:43 ` Carlo Caione
0 siblings, 0 replies; 24+ messages in thread
From: Carlo Caione @ 2016-05-23 11:43 UTC (permalink / raw)
To: linux-arm-kernel
On 23/05/16 13:38, Matthias Brugger wrote:
>
[...]
> >+#include <stdarg.h>
> >+#include <asm/cacheflush.h>
> >+#include <asm/compiler.h>
> >+#include <linux/arm-smccc.h>
> >+#include <linux/io.h>
> >+#include <linux/ioport.h>
> >+#include <linux/module.h>
> >+#include <linux/platform_device.h>
> >+#include <linux/of.h>
> >+#include <linux/smp.h>
> >+
> >+#include <linux/soc/meson/meson_sm.h>
> >+
> >+#define SM_MEM_SIZE 0x1000
> >+
> >+/*
> >+ * To read from / write to the secure monitor we use two bounce buffers. The
> >+ * physical addresses of the two buffers are obtained by querying the secure
> >+ * monitor itself.
> >+ */
> >+
> >+static u32 sm_phy_in_base;
> >+static u32 sm_phy_out_base;
>
> You can put this two variable in meson_sm_probe, right?
Yeah, actually no need to be there.
> >+
> >+static void __iomem *sm_sharemem_in_base;
> >+static void __iomem *sm_sharemem_out_base;
> >+
> >+struct meson_sm_data {
> >+ u32 cmd;
> >+ u32 arg0;
> >+ u32 arg1;
> >+ u32 arg2;
> >+ u32 arg3;
> >+ u32 arg4;
> >+ u32 ret;
> >+};
> >+
> >+static void __meson_sm_call(void *info)
> >+{
> >+ struct meson_sm_data *data = info;
> >+ struct arm_smccc_res res;
> >+
> >+ arm_smccc_smc(data->cmd,
> >+ data->arg0, data->arg1, data->arg2,
> >+ data->arg3, data->arg4, 0, 0, &res);
> >+ data->ret = res.a0;
> >+}
> >+
> >+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
>
> Can the function be static or will it be called from another driver?
It _can_ be called from another driver. It depends on the SMC used, so
better making it available.
>
> >+{
> >+ struct meson_sm_data data;
> >+
> >+ data.cmd = cmd;
> >+ data.arg0 = arg0;
> >+ data.arg1 = arg1;
> >+ data.arg2 = arg2;
> >+ data.arg3 = arg3;
> >+ data.arg4 = arg4;
> >+ data.ret = 0;
> >+
> >+ __meson_sm_call(&data);
> >+
> >+ return data.ret;
> >+}
> >+
> >+u32 meson_sm_call_read(void *buffer, u32 cmd, u32 arg0, u32 arg1,
> >+ u32 arg2, u32 arg3, u32 arg4)
> >+{
> >+ u32 size;
> >+
> >+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> >+
> >+ if (!size || size > SM_MEM_SIZE)
> >+ return -EINVAL;
> >+
> >+ memcpy(buffer, sm_sharemem_out_base, size);
> >+ return size;
> >+}
>
> This function will be needed to be exported to be callable from modules.
Fix in v3.
> >+
> >+u32 meson_sm_call_write(void *buffer, unsigned int b_size, u32 cmd, u32 arg0,
> >+ u32 arg1, u32 arg2, u32 arg3, u32 arg4)
> >+{
> >+ u32 size;
> >+
> >+ if (b_size > SM_MEM_SIZE)
> >+ return -EINVAL;
> >+
> >+ memcpy(sm_sharemem_in_base, buffer, b_size);
> >+
> >+ size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
> >+
> >+ if (!size)
> >+ return -EINVAL;
> >+
> >+ return size;
> >+}
> >+
>
> Same here.
Thanks.
Cheers,
--
Carlo Caione
^ permalink raw reply [flat|nested] 24+ messages in thread