All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>,
	intel-gfx@lists.freedesktop.org,
	"open list:INTEL DRM DRIVERS excluding Poulsbo, Moorestow...,
	linux-kernel@vger.kernel.org open list"
	<dri-devel@lists.freedesktop.org>,
	stable@vger.kernel.org
Subject: Re: [PATCH] drm/i915/ilk: Wait one vblank before enabling audio
Date: Mon, 23 May 2016 21:06:23 +0300	[thread overview]
Message-ID: <20160523180623.GU4329@intel.com> (raw)
In-Reply-To: <1463780200-22813-1-git-send-email-cpaul@redhat.com>

On Fri, May 20, 2016 at 05:36:40PM -0400, Lyude wrote:
> We no longer call ilk_audio_codec_enable() while we have vblanks
> disabled. As such, we can finally fix this and stop the occasional pipe
> underruns I'm seeing on this Dell OptiPlex 990.

Hmm. Are you still getting underruns on -nightly?

I basically tried this same thing (+ a bunch of other tweaks to the
audio enable sequence) when I was hunting the remaining underruns on
my ILK, but in the end audio was a red herring. So I never found
any real benefit from extra vblank waits in the audio enable sequence.
They did appear to help sometimes, but with a enough repetitions it
still failed.

> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Lyude <cpaul@redhat.com>
> ---
>  drivers/gpu/drm/i915/intel_audio.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> index 7d281b4..0d685fe 100644
> --- a/drivers/gpu/drm/i915/intel_audio.c
> +++ b/drivers/gpu/drm/i915/intel_audio.c
> @@ -423,12 +423,8 @@ static void ilk_audio_codec_enable(struct drm_connector *connector,
>  	if (WARN_ON(port == PORT_A))
>  		return;
>  
> -	/*
> -	 * FIXME: We're supposed to wait for vblank here, but we have vblanks
> -	 * disabled during the mode set. The proper fix would be to push the
> -	 * rest of the setup into a vblank work item, queued here, but the
> -	 * infrastructure is not there yet.
> -	 */
> +	/* Need to wait one vblank before enabling audio */
> +	intel_wait_for_vblank(connector->dev, pipe);
>  
>  	if (HAS_PCH_IBX(connector->dev)) {
>  		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
> -- 
> 2.5.5
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Lyude <cpaul@redhat.com>
Cc: intel-gfx@lists.freedesktop.org, stable@vger.kernel.org,
	"open list:INTEL DRM DRIVERS excluding Poulsbo, Moorestow...,
	linux-kernel@vger.kernel.org open list"
	<dri-devel@lists.freedesktop.org>,
	Daniel Vetter <daniel.vetter@intel.com>
Subject: Re: [PATCH] drm/i915/ilk: Wait one vblank before enabling audio
Date: Mon, 23 May 2016 21:06:23 +0300	[thread overview]
Message-ID: <20160523180623.GU4329@intel.com> (raw)
In-Reply-To: <1463780200-22813-1-git-send-email-cpaul@redhat.com>

On Fri, May 20, 2016 at 05:36:40PM -0400, Lyude wrote:
> We no longer call ilk_audio_codec_enable() while we have vblanks
> disabled. As such, we can finally fix this and stop the occasional pipe
> underruns I'm seeing on this Dell OptiPlex 990.

Hmm. Are you still getting underruns on -nightly?

I basically tried this same thing (+ a bunch of other tweaks to the
audio enable sequence) when I was hunting the remaining underruns on
my ILK, but in the end audio was a red herring. So I never found
any real benefit from extra vblank waits in the audio enable sequence.
They did appear to help sometimes, but with a enough repetitions it
still failed.

> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Lyude <cpaul@redhat.com>
> ---
>  drivers/gpu/drm/i915/intel_audio.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> index 7d281b4..0d685fe 100644
> --- a/drivers/gpu/drm/i915/intel_audio.c
> +++ b/drivers/gpu/drm/i915/intel_audio.c
> @@ -423,12 +423,8 @@ static void ilk_audio_codec_enable(struct drm_connector *connector,
>  	if (WARN_ON(port == PORT_A))
>  		return;
>  
> -	/*
> -	 * FIXME: We're supposed to wait for vblank here, but we have vblanks
> -	 * disabled during the mode set. The proper fix would be to push the
> -	 * rest of the setup into a vblank work item, queued here, but the
> -	 * infrastructure is not there yet.
> -	 */
> +	/* Need to wait one vblank before enabling audio */
> +	intel_wait_for_vblank(connector->dev, pipe);
>  
>  	if (HAS_PCH_IBX(connector->dev)) {
>  		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
> -- 
> 2.5.5
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrj�l�
Intel OTC

  parent reply	other threads:[~2016-05-23 18:06 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-20 21:36 [PATCH] drm/i915/ilk: Wait one vblank before enabling audio Lyude
2016-05-20 21:36 ` Lyude
2016-05-21  5:21 ` ✗ Ro.CI.BAT: failure for " Patchwork
2016-05-23  6:32 ` [PATCH] " Jani Nikula
2016-05-23  6:32   ` Jani Nikula
2016-05-23 18:06 ` Ville Syrjälä [this message]
2016-05-23 18:06   ` Ville Syrjälä
2016-05-23 19:30   ` Lyude Paul
2016-05-23 19:30     ` Lyude Paul
2016-05-24  9:36     ` Jani Nikula
2016-05-24  9:36       ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160523180623.GU4329@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=cpaul@redhat.com \
    --cc=daniel.vetter@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.