From: Lee Jones <lee.jones@linaro.org>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
rtc-linux@googlegroups.com, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
mturquette@baylibre.com, sboyd@codeaurora.org,
lgirdwood@gmail.com, broonie@kernel.org, a.zummo@towertech.it,
alexandre.belloni@free-electrons.com, dianders@chromium.org,
zyw@rock-chips.com
Subject: Re: [RESEND PATCH v5 3/5] mfd: dt-bindings: Add RK818 device tree bindings document
Date: Wed, 8 Jun 2016 15:23:26 +0100 [thread overview]
Message-ID: <20160608142326.GF14888@dell> (raw)
In-Reply-To: <1464850228-17244-3-git-send-email-w.egorov@phytec.de>
On Thu, 02 Jun 2016, Wadim Egorov wrote:
> Add device tree bindings documentation for Rockchip's RK818 PMIC.
>
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
> Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> index 4ca6aab..9636ae8 100644
> --- a/Documentation/devicetree/bindings/mfd/rk808.txt
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -1,7 +1,11 @@
> -RK808 Power Management Integrated Circuit
> +RK8XX Power Management Integrated Circuit
> +
> +The rk8xx family current members:
> +rk808
> +rk818
>
> Required properties:
> -- compatible: "rockchip,rk808"
> +- compatible: "rockchip,rk808", "rockchip,rk818"
> - reg: I2C slave address
> - interrupt-parent: The parent interrupt controller.
> - interrupts: the interrupt outputs of the controller.
> @@ -13,6 +17,8 @@ Optional properties:
> default output clock name
> - rockchip,system-power-controller: Telling whether or not this pmic is controlling
> the system power.
> +
> +Optional RK808 properties:
> - vcc1-supply: The input supply for DCDC_REG1
> - vcc2-supply: The input supply for DCDC_REG2
> - vcc3-supply: The input supply for DCDC_REG3
> @@ -29,7 +35,20 @@ Optional properties:
> the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
> very quickly with no slow ramp time.
>
> -Regulators: All the regulators of RK808 to be instantiated shall be
> +Optional RK818 properties:
> +- vcc1-supply: The input supply for DCDC_REG1
> +- vcc2-supply: The input supply for DCDC_REG2
> +- vcc3-supply: The input supply for DCDC_REG3
> +- vcc4-supply: The input supply for DCDC_REG4
> +- boost-supply: The input supply for DCDC_BOOST
> +- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
> +- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
> +- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
> +- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
> +- h_5v-supply: The input supply for HDMI_SWITCH
> +- usb-supply: The input supply for OTG_SWITCH
> +
> +Regulators: All the regulators of RK8XX to be instantiated shall be
> listed in a child node named 'regulators'. Each regulator is represented
> by a child node of the 'regulators' node.
>
> @@ -48,6 +67,18 @@ number as described in RK808 datasheet.
> - SWITCH_REGn
> - valid values for n are 1 to 2
>
> +Following regulators of the RK818 PMIC block are supported. Note that
> +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
> +number as described in RK818 datasheet.
> +
> + - DCDC_REGn
> + - valid values for n are 1 to 4.
> + - LDO_REGn
> + - valid values for n are 1 to 9.
> + - SWITCH_REG
> + - HDMI_SWITCH
> + - OTG_SWITCH
> +
> Standard regulator bindings are used inside regulator subnodes. Check
> Documentation/devicetree/bindings/regulator/regulator.txt
> for more details
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org
Subject: Re: [RESEND PATCH v5 3/5] mfd: dt-bindings: Add RK818 device tree bindings document
Date: Wed, 8 Jun 2016 15:23:26 +0100 [thread overview]
Message-ID: <20160608142326.GF14888@dell> (raw)
In-Reply-To: <1464850228-17244-3-git-send-email-w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
On Thu, 02 Jun 2016, Wadim Egorov wrote:
> Add device tree bindings documentation for Rockchip's RK818 PMIC.
>
> Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> index 4ca6aab..9636ae8 100644
> --- a/Documentation/devicetree/bindings/mfd/rk808.txt
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -1,7 +1,11 @@
> -RK808 Power Management Integrated Circuit
> +RK8XX Power Management Integrated Circuit
> +
> +The rk8xx family current members:
> +rk808
> +rk818
>
> Required properties:
> -- compatible: "rockchip,rk808"
> +- compatible: "rockchip,rk808", "rockchip,rk818"
> - reg: I2C slave address
> - interrupt-parent: The parent interrupt controller.
> - interrupts: the interrupt outputs of the controller.
> @@ -13,6 +17,8 @@ Optional properties:
> default output clock name
> - rockchip,system-power-controller: Telling whether or not this pmic is controlling
> the system power.
> +
> +Optional RK808 properties:
> - vcc1-supply: The input supply for DCDC_REG1
> - vcc2-supply: The input supply for DCDC_REG2
> - vcc3-supply: The input supply for DCDC_REG3
> @@ -29,7 +35,20 @@ Optional properties:
> the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
> very quickly with no slow ramp time.
>
> -Regulators: All the regulators of RK808 to be instantiated shall be
> +Optional RK818 properties:
> +- vcc1-supply: The input supply for DCDC_REG1
> +- vcc2-supply: The input supply for DCDC_REG2
> +- vcc3-supply: The input supply for DCDC_REG3
> +- vcc4-supply: The input supply for DCDC_REG4
> +- boost-supply: The input supply for DCDC_BOOST
> +- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
> +- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
> +- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
> +- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
> +- h_5v-supply: The input supply for HDMI_SWITCH
> +- usb-supply: The input supply for OTG_SWITCH
> +
> +Regulators: All the regulators of RK8XX to be instantiated shall be
> listed in a child node named 'regulators'. Each regulator is represented
> by a child node of the 'regulators' node.
>
> @@ -48,6 +67,18 @@ number as described in RK808 datasheet.
> - SWITCH_REGn
> - valid values for n are 1 to 2
>
> +Following regulators of the RK818 PMIC block are supported. Note that
> +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
> +number as described in RK818 datasheet.
> +
> + - DCDC_REGn
> + - valid values for n are 1 to 4.
> + - LDO_REGn
> + - valid values for n are 1 to 9.
> + - SWITCH_REG
> + - HDMI_SWITCH
> + - OTG_SWITCH
> +
> Standard regulator bindings are used inside regulator subnodes. Check
> Documentation/devicetree/bindings/regulator/regulator.txt
> for more details
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
rtc-linux@googlegroups.com, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
mturquette@baylibre.com, sboyd@codeaurora.org,
lgirdwood@gmail.com, broonie@kernel.org, a.zummo@towertech.it,
alexandre.belloni@free-electrons.com, dianders@chromium.org,
zyw@rock-chips.com
Subject: [rtc-linux] Re: [RESEND PATCH v5 3/5] mfd: dt-bindings: Add RK818 device tree bindings document
Date: Wed, 8 Jun 2016 15:23:26 +0100 [thread overview]
Message-ID: <20160608142326.GF14888@dell> (raw)
In-Reply-To: <1464850228-17244-3-git-send-email-w.egorov@phytec.de>
On Thu, 02 Jun 2016, Wadim Egorov wrote:
> Add device tree bindings documentation for Rockchip's RK818 PMIC.
>=20
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
> Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++=
++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>=20
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentat=
ion/devicetree/bindings/mfd/rk808.txt
> index 4ca6aab..9636ae8 100644
> --- a/Documentation/devicetree/bindings/mfd/rk808.txt
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -1,7 +1,11 @@
> -RK808 Power Management Integrated Circuit
> +RK8XX Power Management Integrated Circuit
> +
> +The rk8xx family current members:
> +rk808
> +rk818
> =20
> Required properties:
> -- compatible: "rockchip,rk808"
> +- compatible: "rockchip,rk808", "rockchip,rk818"
> - reg: I2C slave address
> - interrupt-parent: The parent interrupt controller.
> - interrupts: the interrupt outputs of the controller.
> @@ -13,6 +17,8 @@ Optional properties:
> default output clock name
> - rockchip,system-power-controller: Telling whether or not this pmic is =
controlling
> the system power.
> +
> +Optional RK808 properties:
> - vcc1-supply: The input supply for DCDC_REG1
> - vcc2-supply: The input supply for DCDC_REG2
> - vcc3-supply: The input supply for DCDC_REG3
> @@ -29,7 +35,20 @@ Optional properties:
> the gpio controller. If DVS GPIOs aren't present, voltage changes will=
happen
> very quickly with no slow ramp time.
> =20
> -Regulators: All the regulators of RK808 to be instantiated shall be
> +Optional RK818 properties:
> +- vcc1-supply: The input supply for DCDC_REG1
> +- vcc2-supply: The input supply for DCDC_REG2
> +- vcc3-supply: The input supply for DCDC_REG3
> +- vcc4-supply: The input supply for DCDC_REG4
> +- boost-supply: The input supply for DCDC_BOOST
> +- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
> +- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
> +- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
> +- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
> +- h_5v-supply: The input supply for HDMI_SWITCH
> +- usb-supply: The input supply for OTG_SWITCH
> +
> +Regulators: All the regulators of RK8XX to be instantiated shall be
> listed in a child node named 'regulators'. Each regulator is represented
> by a child node of the 'regulators' node.
> =20
> @@ -48,6 +67,18 @@ number as described in RK808 datasheet.
> - SWITCH_REGn
> - valid values for n are 1 to 2
> =20
> +Following regulators of the RK818 PMIC block are supported. Note that
> +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC =
or LDO
> +number as described in RK818 datasheet.
> +
> + - DCDC_REGn
> + - valid values for n are 1 to 4.
> + - LDO_REGn
> + - valid values for n are 1 to 9.
> + - SWITCH_REG
> + - HDMI_SWITCH
> + - OTG_SWITCH
> +
> Standard regulator bindings are used inside regulator subnodes. Check
> Documentation/devicetree/bindings/regulator/regulator.txt
> for more details
--=20
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org =E2=94=82 Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2016-06-08 14:23 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-02 6:50 [RESEND PATCH v5 1/5] mfd: RK808: Add RK818 support Wadim Egorov
2016-06-02 6:50 ` [rtc-linux] " Wadim Egorov
2016-06-02 6:50 ` Wadim Egorov
2016-06-02 6:50 ` [RESEND PATCH v5 2/5] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
2016-06-02 6:50 ` [rtc-linux] " Wadim Egorov
2016-06-02 6:50 ` [RESEND PATCH v5 3/5] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
2016-06-02 6:50 ` [rtc-linux] " Wadim Egorov
2016-06-08 14:23 ` Lee Jones [this message]
2016-06-08 14:23 ` [rtc-linux] " Lee Jones
2016-06-08 14:23 ` Lee Jones
2016-06-02 6:50 ` [RESEND PATCH v5 4/5] clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808 Wadim Egorov
2016-06-02 6:50 ` [rtc-linux] " Wadim Egorov
2016-06-02 6:50 ` Wadim Egorov
2016-07-06 22:22 ` Michael Turquette
2016-07-06 22:22 ` Michael Turquette
2016-07-06 22:22 ` [rtc-linux] " Michael Turquette
2016-07-06 22:22 ` Michael Turquette
2016-06-02 6:50 ` [RESEND PATCH v5 5/5] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
2016-06-02 6:50 ` [rtc-linux] " Wadim Egorov
2016-06-02 6:50 ` Wadim Egorov
2016-06-08 14:17 ` [RESEND PATCH v5 1/5] mfd: RK808: Add RK818 support Lee Jones
2016-06-08 14:17 ` [rtc-linux] " Lee Jones
2016-06-08 14:17 ` Lee Jones
2016-06-09 8:23 ` Wadim Egorov
2016-06-09 8:23 ` [rtc-linux] " Wadim Egorov
2016-06-09 8:23 ` Wadim Egorov
2016-06-09 11:12 ` Lee Jones
2016-06-09 11:12 ` [rtc-linux] " Lee Jones
2016-06-09 13:11 ` Wadim Egorov
2016-06-09 13:11 ` [rtc-linux] " Wadim Egorov
2016-06-09 15:28 ` Lee Jones
2016-06-09 15:28 ` [rtc-linux] " Lee Jones
2016-06-09 15:28 ` Lee Jones
2016-07-06 3:15 ` Andy Yan
2016-07-06 3:15 ` [rtc-linux] " Andy Yan
2016-07-06 3:15 ` Andy Yan
2016-07-06 8:03 ` Wadim Egorov
2016-07-06 8:03 ` Wadim Egorov
2016-07-06 8:03 ` [rtc-linux] " Wadim Egorov
2016-07-06 8:03 ` Wadim Egorov
2016-07-06 8:56 ` Andy Yan
2016-07-06 8:56 ` [rtc-linux] " Andy Yan
2016-07-06 8:56 ` Andy Yan
2016-08-05 12:22 ` Lee Jones
2016-08-05 12:22 ` [rtc-linux] " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160608142326.GF14888@dell \
--to=lee.jones@linaro.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=sboyd@codeaurora.org \
--cc=w.egorov@phytec.de \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.