From: Stephen Boyd <sboyd@codeaurora.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
Andy Gross <andy.gross@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
David Brown <david.brown@linaro.org>
Subject: Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
Date: Tue, 14 Jun 2016 11:55:17 -0700 [thread overview]
Message-ID: <20160614185517.GG28218@codeaurora.org> (raw)
In-Reply-To: <1465918259-11138-4-git-send-email-linus.walleij@linaro.org>
On 06/14, Linus Walleij wrote:
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index a5a38820554a..51d3c9e70617 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -215,6 +215,95 @@
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc";
> + #clock-cells = <1>;
> + };
This driver isn't merged yet, but ok.
> +
> + pm8901-regulators {
I'd rather have regulators@8901 and regulators@8058. That way the
node name is generic per ePAPR suggestions.
> + compatible = "qcom,rpm-pm8901-regulators";
> +
> + pm8901_l0: l0 {};
> + pm8901_l1: l1 {};
> + pm8901_l2: l2 {};
> + pm8901_l3: l3 {};
> + pm8901_l4: l4 {};
> + pm8901_l5: l5 {};
> + pm8901_l6: l6 {};
> +
> + /* S0 and S1 Handled as SAW regulators by SPM */
> + pm8901_s2: s2 {};
> + pm8901_s3: s3 {};
> + pm8901_s4: s4 {};
> +
> + pm8901_lvs0: lvs0 {};
> + pm8901_lvs1: lvs1 {};
> + pm8901_lvs2: lvs2 {};
> + pm8901_lvs3: lvs3 {};
> +
> + pm8058_mvs: mvs {};
pm8901_mvs?
> + };
> +
> + pm8058-regulators {
> + compatible = "qcom,rpm-pm8058-regulators";
> +
> + pm8058_l0: l0 {};
> + pm8058_l1: l1 {};
> + pm8058_l2: l2 {};
> + pm8058_l3: l3 {};
> + pm8058_l4: l4 {};
> + pm8058_l5: l5 {};
> + pm8058_l6: l6 {};
> + pm8058_l7: l7 {};
> + pm8058_l8: l8 {};
> + pm8058_l9: l9 {};
> + pm8058_l10: l10 {};
> + pm8058_l11: l11 {};
> + pm8058_l12: l12 {};
> + pm8058_l13: l13 {};
> + pm8058_l14: l14 {};
> + pm8058_l15: l15 {};
> + pm8058_l16: l16 {};
> + pm8058_l17: l17 {};
> + pm8058_l18: l18 {};
> + pm8058_l19: l19 {};
> + pm8058_l20: l20 {};
> + pm8058_l21: l21 {};
> + pm8058_l22: l22 {};
> + pm8058_l23: l23 {};
> + pm8058_l24: l24 {};
> + pm8058_l25: l25 {};
> +
> + pm8058_s0: s0 {};
> + pm8058_s1: s1 {};
Just leave these out? RPM shouldn't be touching s0 or s1.
> + pm8058_s2: s2 {};
> + pm8058_s3: s3 {};
> + pm8058_s4: s4 {};
> +
> + pm8058_lvs0: lvs0 {};
> + pm8058_lvs1: lvs1 {};
> +
> + pm8058_ncp: ncp {};
> + };
> + };
> +
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
Date: Tue, 14 Jun 2016 11:55:17 -0700 [thread overview]
Message-ID: <20160614185517.GG28218@codeaurora.org> (raw)
In-Reply-To: <1465918259-11138-4-git-send-email-linus.walleij@linaro.org>
On 06/14, Linus Walleij wrote:
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index a5a38820554a..51d3c9e70617 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -215,6 +215,95 @@
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc";
> + #clock-cells = <1>;
> + };
This driver isn't merged yet, but ok.
> +
> + pm8901-regulators {
I'd rather have regulators at 8901 and regulators at 8058. That way the
node name is generic per ePAPR suggestions.
> + compatible = "qcom,rpm-pm8901-regulators";
> +
> + pm8901_l0: l0 {};
> + pm8901_l1: l1 {};
> + pm8901_l2: l2 {};
> + pm8901_l3: l3 {};
> + pm8901_l4: l4 {};
> + pm8901_l5: l5 {};
> + pm8901_l6: l6 {};
> +
> + /* S0 and S1 Handled as SAW regulators by SPM */
> + pm8901_s2: s2 {};
> + pm8901_s3: s3 {};
> + pm8901_s4: s4 {};
> +
> + pm8901_lvs0: lvs0 {};
> + pm8901_lvs1: lvs1 {};
> + pm8901_lvs2: lvs2 {};
> + pm8901_lvs3: lvs3 {};
> +
> + pm8058_mvs: mvs {};
pm8901_mvs?
> + };
> +
> + pm8058-regulators {
> + compatible = "qcom,rpm-pm8058-regulators";
> +
> + pm8058_l0: l0 {};
> + pm8058_l1: l1 {};
> + pm8058_l2: l2 {};
> + pm8058_l3: l3 {};
> + pm8058_l4: l4 {};
> + pm8058_l5: l5 {};
> + pm8058_l6: l6 {};
> + pm8058_l7: l7 {};
> + pm8058_l8: l8 {};
> + pm8058_l9: l9 {};
> + pm8058_l10: l10 {};
> + pm8058_l11: l11 {};
> + pm8058_l12: l12 {};
> + pm8058_l13: l13 {};
> + pm8058_l14: l14 {};
> + pm8058_l15: l15 {};
> + pm8058_l16: l16 {};
> + pm8058_l17: l17 {};
> + pm8058_l18: l18 {};
> + pm8058_l19: l19 {};
> + pm8058_l20: l20 {};
> + pm8058_l21: l21 {};
> + pm8058_l22: l22 {};
> + pm8058_l23: l23 {};
> + pm8058_l24: l24 {};
> + pm8058_l25: l25 {};
> +
> + pm8058_s0: s0 {};
> + pm8058_s1: s1 {};
Just leave these out? RPM shouldn't be touching s0 or s1.
> + pm8058_s2: s2 {};
> + pm8058_s3: s3 {};
> + pm8058_s4: s4 {};
> +
> + pm8058_lvs0: lvs0 {};
> + pm8058_lvs1: lvs1 {};
> +
> + pm8058_ncp: ncp {};
> + };
> + };
> +
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-06-14 18:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-14 15:30 [PATCH 0/5] APQ8060 Dragonboard support Linus Walleij
2016-06-14 15:30 ` Linus Walleij
2016-06-14 15:30 ` [PATCH 1/5] ARM: dts: add GPIO and MPP to MSM8660 PMIC Linus Walleij
2016-06-14 15:30 ` Linus Walleij
2016-06-14 18:57 ` Stephen Boyd
2016-06-14 18:57 ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660 Linus Walleij
2016-06-14 15:30 ` Linus Walleij
2016-06-14 18:57 ` Stephen Boyd
2016-06-14 18:57 ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660 Linus Walleij
2016-06-14 15:30 ` Linus Walleij
2016-06-14 18:55 ` Stephen Boyd [this message]
2016-06-14 18:55 ` Stephen Boyd
2016-06-14 19:02 ` Bjorn Andersson
2016-06-14 19:02 ` Bjorn Andersson
2016-06-14 19:48 ` Stephen Boyd
2016-06-14 19:48 ` Stephen Boyd
2016-06-14 22:51 ` Russell King - ARM Linux
2016-06-14 22:51 ` Russell King - ARM Linux
2016-06-14 22:48 ` Russell King - ARM Linux
2016-06-14 22:48 ` Russell King - ARM Linux
2016-06-16 0:17 ` Stephen Boyd
2016-06-16 0:17 ` Stephen Boyd
2016-06-16 8:09 ` Russell King - ARM Linux
2016-06-16 8:09 ` Russell King - ARM Linux
2016-06-15 13:16 ` Linus Walleij
2016-06-15 13:16 ` Linus Walleij
2016-06-16 0:57 ` Stephen Boyd
2016-06-16 0:57 ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 4/5] ARM: dts: move the fixed MMC regulator to SURF board Linus Walleij
2016-06-14 15:30 ` Linus Walleij
2016-06-14 18:55 ` Stephen Boyd
2016-06-14 18:55 ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard Linus Walleij
2016-06-14 15:30 ` Linus Walleij
2016-06-14 19:11 ` Stephen Boyd
2016-06-14 19:11 ` Stephen Boyd
2016-06-15 13:37 ` Linus Walleij
2016-06-15 13:37 ` Linus Walleij
2016-06-16 0:11 ` Stephen Boyd
2016-06-16 0:11 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160614185517.GG28218@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.