From: Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
To: Meelis Roos <mroos-Y27EyoLml9s@public.gmane.org>
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Linux Kernel list
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: IOMMU+DMAR causing NMIs-s (was: 4.7-rc6: NMI in intel_idle on HP Proliant G6)
Date: Wed, 13 Jul 2016 11:43:03 +0200 [thread overview]
Message-ID: <20160713094303.GL12639@8bytes.org> (raw)
In-Reply-To: <alpine.LRH.2.20.1607131206430.20366-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
On Wed, Jul 13, 2016 at 12:16:46PM +0300, Meelis Roos wrote:
> ROM setup settings that might be of interest:
>
> Advanced memory protection: advanced ecc support
> No-Execute memory protection: enabled
> Intel virtualization technology: enabled
> Intel hyperthreading options: enabled
> Processor core disable: all cored enabled
> Intel turbo boost technology: enabled
> Intel VT-d: enabled
> HP power profile: custom
> HP power regulator: hp dynamic power savings mode (not OS control)
> Intel qpi link power management: enabled
> Minimum processor idle power core state: C6
> Minimum processor idle power package state: C6
> Dynamic power saving mode response: fast
> Collaborative power control: enabled
> MPS table: full table apic
> NMI debug button: enabled
> PCI bus padding options: enabled
> HW prefetcher: enabled
> Adjacent sector prefetch: enabled
> Node interleaving: disabled
AFAICT these settings look normal.
> Nothing in ILO log or integrated management log (IML).
Then I think we need a bisect to make progress here.
Joerg
WARNING: multiple messages have this Message-ID (diff)
From: Joerg Roedel <joro@8bytes.org>
To: Meelis Roos <mroos@linux.ee>
Cc: iommu@lists.linux-foundation.org,
Linux Kernel list <linux-kernel@vger.kernel.org>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: IOMMU+DMAR causing NMIs-s (was: 4.7-rc6: NMI in intel_idle on HP Proliant G6)
Date: Wed, 13 Jul 2016 11:43:03 +0200 [thread overview]
Message-ID: <20160713094303.GL12639@8bytes.org> (raw)
In-Reply-To: <alpine.LRH.2.20.1607131206430.20366@math.ut.ee>
On Wed, Jul 13, 2016 at 12:16:46PM +0300, Meelis Roos wrote:
> ROM setup settings that might be of interest:
>
> Advanced memory protection: advanced ecc support
> No-Execute memory protection: enabled
> Intel virtualization technology: enabled
> Intel hyperthreading options: enabled
> Processor core disable: all cored enabled
> Intel turbo boost technology: enabled
> Intel VT-d: enabled
> HP power profile: custom
> HP power regulator: hp dynamic power savings mode (not OS control)
> Intel qpi link power management: enabled
> Minimum processor idle power core state: C6
> Minimum processor idle power package state: C6
> Dynamic power saving mode response: fast
> Collaborative power control: enabled
> MPS table: full table apic
> NMI debug button: enabled
> PCI bus padding options: enabled
> HW prefetcher: enabled
> Adjacent sector prefetch: enabled
> Node interleaving: disabled
AFAICT these settings look normal.
> Nothing in ILO log or integrated management log (IML).
Then I think we need a bisect to make progress here.
Joerg
next prev parent reply other threads:[~2016-07-13 9:43 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 12:05 4.7-rc6: NMI in intel_idle on HP Proliant G6 Meelis Roos
2016-07-12 12:27 ` Meelis Roos
2016-07-12 12:40 ` Rafael J. Wysocki
2016-07-12 14:22 ` Meelis Roos
2016-07-13 7:17 ` IOMMU+DMAR causing NMIs-s (was: 4.7-rc6: NMI in intel_idle on HP Proliant G6) Meelis Roos
[not found] ` <alpine.LRH.2.20.1607130855210.11080-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
2016-07-13 8:18 ` Joerg Roedel
2016-07-13 8:18 ` Joerg Roedel
[not found] ` <20160713081817.GJ12639-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-07-13 8:31 ` Meelis Roos
2016-07-13 8:31 ` Meelis Roos
[not found] ` <alpine.LRH.2.20.1607131122010.20366-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
2016-07-13 9:03 ` Joerg Roedel
2016-07-13 9:03 ` Joerg Roedel
[not found] ` <20160713090332.GK12639-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-07-13 9:16 ` Meelis Roos
2016-07-13 9:16 ` Meelis Roos
[not found] ` <alpine.LRH.2.20.1607131206430.20366-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
2016-07-13 9:43 ` Joerg Roedel [this message]
2016-07-13 9:43 ` Joerg Roedel
2016-07-13 9:40 ` Meelis Roos
2016-07-13 9:40 ` Meelis Roos
[not found] ` <alpine.LRH.2.20.1607131239410.20366-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
2016-07-13 9:49 ` Joerg Roedel
2016-07-13 9:49 ` Joerg Roedel
[not found] ` <20160713094917.GM12639-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-07-13 9:58 ` Meelis Roos
2016-07-13 9:58 ` Meelis Roos
[not found] ` <alpine.LRH.2.20.1607131257390.20366-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
2016-07-13 10:18 ` Joerg Roedel
2016-07-13 10:18 ` Joerg Roedel
[not found] ` <20160713101859.GO12639-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-07-13 14:48 ` Alex Williamson
2016-07-13 14:48 ` Alex Williamson
[not found] ` <20160713084830.09453584-1yVPhWWZRC1BDLzU/O5InQ@public.gmane.org>
2016-07-13 15:13 ` IOMMU+DMAR causing NMIs-s Linda Knippers
2016-07-13 15:13 ` Linda Knippers
[not found] ` <1a4c4b65-c716-08a5-af89-1b0f551024ed-ZPxbGqLxI0U@public.gmane.org>
2016-07-13 21:52 ` Meelis Roos
2016-07-13 21:52 ` Meelis Roos
[not found] ` <alpine.LRH.2.20.1607132258001.30020-ptEonEWSGqKptlylMvRsHA@public.gmane.org>
2016-07-13 23:04 ` Alex Williamson
2016-07-13 23:04 ` Alex Williamson
[not found] ` <20160713170408.6e5d2534-1yVPhWWZRC1BDLzU/O5InQ@public.gmane.org>
2016-07-14 8:31 ` Joerg Roedel
2016-07-14 8:31 ` Joerg Roedel
2016-08-24 8:19 ` Meelis Roos
2016-08-24 8:19 ` Meelis Roos
2016-07-13 13:52 ` IOMMU+DMAR causing NMIs-s (was: 4.7-rc6: NMI in intel_idle on HP Proliant G6) Henrique de Moraes Holschuh
2016-07-13 7:21 ` 4.7-rc6: NMI in intel_idle on HP Proliant G6 Meelis Roos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160713094303.GL12639@8bytes.org \
--to=joro-zlv9swrftaidnm+yrofe0a@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mroos-Y27EyoLml9s@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.