Re: mm: GPF in find_get_pages_tag

[Ross Zwisler <ross.zwisler@linux.intel.com>]

On Tue, Jul 05, 2016 at 01:39:23PM +0200, Dmitry Vyukov wrote:
> Hello,
> 
> The following program triggers GPF in find_get_pages_tag if run in
> parallel loop for minutes:
> 
> kasan: CONFIG_KASAN_INLINE enabled
> kasan: GPF could be caused by NULL-ptr deref or user memory access
> general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
> Modules linked in:
> CPU: 2 PID: 301 Comm: a.out Tainted: G        W       4.7.0-rc5+ #28
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
> task: ffff880063d12440 ti: ffff880067350000 task.ti: ffff880067350000
> RIP: 0010:[<ffffffff816951a4>]
>   [<     inline     >] radix_tree_next_slot include/linux/radix-tree.h:473
>   [<ffffffff816951a4>] find_get_pages_tag+0x334/0x930 mm/filemap.c:1452
> RSP: 0018:ffff880067357840  EFLAGS: 00010202
> RAX: 0000000000000001 RBX: 0000000000000001 RCX: ffff880063d12c80
> RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000008
> RBP: ffff880067357910 R08: 0000000000000002 R09: 0000000000000000
> R10: 0000000000000000 R11: ffffffff89f06360 R12: 0000000000000001
> R13: 0000000000000000 R14: 0000000000000000 R15: ffffed0007058ee5
> FS:  00007f56e017c700(0000) GS:ffff88006d400000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f56df97ae78 CR3: 0000000063d9e000 CR4: 00000000000006e0
> Stack:
>  ffffffff81694efc ffff8800673578a8 0000010267357860 ffff880067357a50
>  ffff880065986aa0 1ffff1000ce6af11 0000000e00000000 ffff880067357a00
>  0000000000000003 0000000041b58ab3 ffffffff87e2a722 ffffffff81694e70
> Call Trace:
>  [<ffffffff816cd91a>] pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960
>  [<ffffffff81ab4231>] mpage_prepare_extent_to_map+0x321/0xa90
> fs/ext4/inode.c:2516
>  [<ffffffff81ac883e>] ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736
>  [<ffffffff816c99c7>] do_writepages+0x97/0x100 mm/page-writeback.c:2364
>  [<ffffffff8169bee8>] __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300
>  [<ffffffff8169c371>] filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490
>  [<ffffffff81aa584d>] ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115
>  [<ffffffff818b667a>] vfs_fsync_range+0x10a/0x250 fs/sync.c:195
>  [<     inline     >] vfs_fsync fs/sync.c:209
>  [<ffffffff818b6832>] do_fsync+0x42/0x70 fs/sync.c:219
>  [<     inline     >] SYSC_fdatasync fs/sync.c:232
>  [<ffffffff818b6f89>] SyS_fdatasync+0x19/0x20 fs/sync.c:230
>  [<ffffffff86a94e00>] entry_SYSCALL_64_fastpath+0x23/0xc1
> arch/x86/entry/entry_64.S:207
> Code: 85 70 ff ff ff 49 d1 ec 4d 85 e4 4c 89 65 a8 74 65 e8 51 06 f0
> ff 49 8d 7e 08 48 be 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 <80>
> 3c 30 00 0f 85 9c 05 00 00 4d 8b 6e 08 4c 89 eb 83 e3 03 48
> RIP  [<     inline     >] radix_tree_next_slot include/linux/radix-tree.h:473
> RIP  [<ffffffff816951a4>] find_get_pages_tag+0x334/0x930 mm/filemap.c:1452
>  RSP <ffff880067357840>
> ---[ end trace 33a0cc4dd9a49a67 ]---
> 
> 
> 
> // autogenerated by syzkaller (http://github.com/google/syzkaller)
> #include <pthread.h>
> #include <stdint.h>
> #include <string.h>
> #include <stdio.h>
> #include <sys/syscall.h>
> #include <unistd.h>
> 
> int fd;
> char buf[8192];
> char filename[256];
> 
> void* thr(void* arg)
> {
>   switch ((long)arg) {
>   case 0:
>     write(fd, buf, 0x1001ul);
>     break;
>   case 1:
>     fdatasync(fd);
>     break;
>   case 2:
>     ftruncate(fd, 2);
>     break;
>   case 3:
>     write(fd, buf, 0x20ul);
>     break;
>   case 5:
>     fd = open(filename, 0x50042ul, 0x41ul);
>     break;

This open() code is unreachable because the thread argument will only be 0-4,
right?  Should this be "case 4"?

>   }
>   return 0;
> }
> 
> int main()
> {
>   long i;
>   pthread_t th[10];
> 
>   srand(getpid());
>   sprintf(filename, "./file%d", getpid());
>   fd = open(filename, 0x50042ul, 0x41ul);
>   for (i = 0; i < 10; i++) {
>     pthread_create(&th[i], 0, thr, (void*)(i % 5));
>     usleep(rand() % 10);
>   }
>   for (i = 0; i < 10; i++)
>     pthread_join(th[i], 0);
>   unlink(filename);
>   return 0;
> }
> 
> The faulting instruction is:
> ffffffff816951a4:       80 3c 30 00             cmpb   $0x0,(%rax,%rsi,1)
> So this is KASAN shadow check for NULL address.
> 
> 
> The previous taint is not relevant, it is:
> 
> [   74.786477] ------------[ cut here ]------------
> [   74.786885] WARNING: CPU: 2 PID: 717 at lib/stackdepot.c:119
> depot_save_stack+0x34f/0x5b0
> [   74.787196] Stack depot reached limit capacity
> 
> 
> On commit 1a0a02d1efa066001fd315c1b4df583d939fa2c4 (Jun 30).

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>