From: Peter Chen <hzpeterchen@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: Peter Chen <peter.chen@nxp.com>,
gregkh@linuxfoundation.org, stern@rowland.harvard.edu,
ulf.hansson@linaro.org, broonie@kernel.org, sre@kernel.org,
shawnguo@kernel.org, k.kozlowski@samsung.com,
linux-arm-kernel@lists.infradead.org, p.zabel@pengutronix.de,
devicetree@vger.kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, linux-usb@vger.kernel.org, arnd@arndb.de,
s.hauer@pengutronix.de, mail@maciej.szmigiero.name,
troy.kisky@boundarydevices.com, festevam@gmail.com,
oscar@naiandei.net, stephen.boyd@linaro.org,
linux-pm@vger.kernel.org, stillcompiling@gmail.com
Subject: Re: [PATCH v2 3/6] binding-doc: usb: usb-device: add optional properties for power sequence
Date: Mon, 18 Jul 2016 10:55:07 +0800 [thread overview]
Message-ID: <20160718025507.GC31293@shlinux2> (raw)
In-Reply-To: <20160716223158.GB8984@rob-hp-laptop>
On Sat, Jul 16, 2016 at 05:31:59PM -0500, Rob Herring wrote:
> On Wed, Jul 13, 2016 at 10:06:47AM +0800, Peter Chen wrote:
> > Add optional properties for power sequence.
> >
> > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > ---
> > Documentation/devicetree/bindings/usb/usb-device.txt | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
> > index 1c35e7b..0ccaadf 100644
> > --- a/Documentation/devicetree/bindings/usb/usb-device.txt
> > +++ b/Documentation/devicetree/bindings/usb/usb-device.txt
> > @@ -13,6 +13,10 @@ Required properties:
> > - reg: the port number which this device is connecting to, the range
> > is 1-31.
> >
> > +Optional properties:
> > +power sequence properties, see
> > +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail
> > +
> > Example:
> >
> > &usb1 {
> > @@ -24,5 +28,10 @@ Example:
> > hub: genesys@1 {
> > compatible = "usb5e3,608";
> > reg = <1>;
> > +
> > + power-sequence;
> > + clocks = <&clks IMX6SX_CLK_CKO>;
> > + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */
> > + reset-duration-us = <10>;
>
> These belong in the binding doc for the hub.
>
There is no dedicated binding doc for USB hub, we only have this binding
doc for hard-wired USB devices.
--
Best Regards,
Peter Chen
WARNING: multiple messages have this Message-ID (diff)
From: hzpeterchen@gmail.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/6] binding-doc: usb: usb-device: add optional properties for power sequence
Date: Mon, 18 Jul 2016 10:55:07 +0800 [thread overview]
Message-ID: <20160718025507.GC31293@shlinux2> (raw)
In-Reply-To: <20160716223158.GB8984@rob-hp-laptop>
On Sat, Jul 16, 2016 at 05:31:59PM -0500, Rob Herring wrote:
> On Wed, Jul 13, 2016 at 10:06:47AM +0800, Peter Chen wrote:
> > Add optional properties for power sequence.
> >
> > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > ---
> > Documentation/devicetree/bindings/usb/usb-device.txt | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
> > index 1c35e7b..0ccaadf 100644
> > --- a/Documentation/devicetree/bindings/usb/usb-device.txt
> > +++ b/Documentation/devicetree/bindings/usb/usb-device.txt
> > @@ -13,6 +13,10 @@ Required properties:
> > - reg: the port number which this device is connecting to, the range
> > is 1-31.
> >
> > +Optional properties:
> > +power sequence properties, see
> > +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail
> > +
> > Example:
> >
> > &usb1 {
> > @@ -24,5 +28,10 @@ Example:
> > hub: genesys at 1 {
> > compatible = "usb5e3,608";
> > reg = <1>;
> > +
> > + power-sequence;
> > + clocks = <&clks IMX6SX_CLK_CKO>;
> > + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */
> > + reset-duration-us = <10>;
>
> These belong in the binding doc for the hub.
>
There is no dedicated binding doc for USB hub, we only have this binding
doc for hard-wired USB devices.
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2016-07-18 3:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-13 2:06 [PATCH v2 0/6] power: add power sequence library Peter Chen
2016-07-13 2:06 ` Peter Chen
2016-07-13 2:06 ` [PATCH v2 1/6] binding-doc: power: pwrseq-generic: add binding doc for generic " Peter Chen
2016-07-13 2:06 ` Peter Chen
2016-07-13 7:27 ` Philipp Zabel
2016-07-13 7:27 ` Philipp Zabel
2016-07-13 8:42 ` Peter Chen
2016-07-13 8:42 ` Peter Chen
2016-07-13 23:20 ` Joshua Clayton
2016-07-13 23:20 ` Joshua Clayton
2016-07-14 6:36 ` Peter Chen
2016-07-14 6:36 ` Peter Chen
2016-07-16 22:30 ` Rob Herring
2016-07-16 22:30 ` Rob Herring
2016-07-18 3:04 ` Peter Chen
2016-07-18 3:04 ` Peter Chen
2016-07-13 2:06 ` [PATCH v2 2/6] power: add " Peter Chen
2016-07-13 2:06 ` Peter Chen
2016-07-13 2:06 ` [PATCH v2 3/6] binding-doc: usb: usb-device: add optional properties for power sequence Peter Chen
2016-07-13 2:06 ` Peter Chen
2016-07-16 22:31 ` Rob Herring
2016-07-16 22:31 ` Rob Herring
2016-07-18 2:55 ` Peter Chen [this message]
2016-07-18 2:55 ` Peter Chen
2016-07-13 2:06 ` [PATCH v2 4/6] usb: core: add power sequence handling for USB devices Peter Chen
2016-07-13 2:06 ` Peter Chen
[not found] ` <1468375610-18625-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-07-13 2:06 ` [PATCH v2 5/6] usb: chipidea: let chipidea core device of_node equal's glue layer device of_node Peter Chen
2016-07-13 2:06 ` Peter Chen
2016-08-23 10:22 ` [PATCH v2 0/6] power: add power sequence library Vaibhav Hiremath
2016-08-23 10:22 ` Vaibhav Hiremath
2016-08-23 10:27 ` Vaibhav Hiremath
2016-08-23 10:27 ` Vaibhav Hiremath
2016-07-13 2:06 ` [PATCH v2 6/6] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property Peter Chen
2016-07-13 2:06 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160718025507.GC31293@shlinux2 \
--to=hzpeterchen@gmail.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=k.kozlowski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mail@maciej.szmigiero.name \
--cc=mark.rutland@arm.com \
--cc=oscar@naiandei.net \
--cc=p.zabel@pengutronix.de \
--cc=pawel.moll@arm.com \
--cc=peter.chen@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=sre@kernel.org \
--cc=stephen.boyd@linaro.org \
--cc=stern@rowland.harvard.edu \
--cc=stillcompiling@gmail.com \
--cc=troy.kisky@boundarydevices.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.