All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Peter Xu <peterx@redhat.com>, Paolo Bonzini <pbonzini@redhat.com>,
	Marcelo Tosatti <mtosatti@redhat.com>,
	Richard Henderson <rth@twiddle.net>,
	Eduardo Habkost <ehabkost@redhat.com>,
	James Hogan <james.hogan@imgtec.com>,
	Aurelien Jarno <aurelien@aurel32.net>,
	Leon Alrae <leon.alrae@imgtec.com>,
	Alexander Graf <agraf@suse.de>,
	David Gibson <david@gibson.dropbear.id.au>,
	Christian Borntraeger <borntraeger@de.ibm.com>,
	Cornelia Huck <cornelia.huck@de.ibm.com>,
	kvm@vger.kernel.org, qemu-arm@nongnu.org, qemu-ppc@nongnu.org
Subject: [PULL v2 30/55] kvm-irqchip: i386: add hook for add/remove virq
Date: Tue, 19 Jul 2016 20:53:20 +0300	[thread overview]
Message-ID: <20160719175320.GA341@redhat.com> (raw)
In-Reply-To: <1468950176-31959-1-git-send-email-mst@redhat.com>

From: Peter Xu <peterx@redhat.com>

Adding two hooks to be notified when adding/removing msi routes. There
are two kinds of MSI routes:

- in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by
  vhost, vfio, etc.

- in kvm_irqchip_send_msi(): when sending direct MSI message, if
  direct MSI not allowed, we will first create one MSI route entry
  in the kernel, then trigger it.

This patch only hooks the first one (irqfd case). We do not need to
take care for the 2nd one, since it's only used by QEMU userspace
(kvm-apic) and the messages will always do in-time translation when
triggered. While we need to note them down for the 1st one, so that we
can notify the kernel when cache invalidation happens.

Also, we do not hook IOAPIC msi routes (we have explicit notifier for
IOAPIC to keep its cache updated). We only need to care about irqfd
users.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/sysemu/kvm.h     |  6 ++++++
 kvm-all.c                |  2 ++
 target-arm/kvm.c         | 11 +++++++++++
 target-i386/kvm.c        | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
 target-mips/kvm.c        | 11 +++++++++++
 target-ppc/kvm.c         | 11 +++++++++++
 target-s390x/kvm.c       | 11 +++++++++++
 target-i386/trace-events |  2 ++
 8 files changed, 102 insertions(+)

diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index e5d90bd..0a16e0e 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -359,6 +359,12 @@ void kvm_arch_init_irq_routing(KVMState *s);
 int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
                              uint64_t address, uint32_t data, PCIDevice *dev);
 
+/* Notify arch about newly added MSI routes */
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev);
+/* Notify arch about released MSI routes */
+int kvm_arch_release_virq_post(int virq);
+
 int kvm_arch_msi_data_to_gsi(uint32_t data);
 
 int kvm_set_irq(KVMState *s, int irq, int level);
diff --git a/kvm-all.c b/kvm-all.c
index d94c0e4..69ff658 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -1133,6 +1133,7 @@ void kvm_irqchip_release_virq(KVMState *s, int virq)
         }
     }
     clear_gsi(s, virq);
+    kvm_arch_release_virq_post(virq);
 }
 
 static unsigned int kvm_hash_msi(uint32_t data)
@@ -1281,6 +1282,7 @@ int kvm_irqchip_add_msi_route(KVMState *s, int vector, PCIDevice *dev)
     }
 
     kvm_add_routing_entry(s, &kroute);
+    kvm_arch_add_msi_route_post(&kroute, vector, dev);
     kvm_irqchip_commit_routes(s);
 
     return virq;
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index 5c2bd7a..dbe393c 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -622,6 +622,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     return (data - 32) & 0xffff;
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index f574513..8875034 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -3400,6 +3400,54 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+typedef struct MSIRouteEntry MSIRouteEntry;
+
+struct MSIRouteEntry {
+    PCIDevice *dev;             /* Device pointer */
+    int vector;                 /* MSI/MSIX vector index */
+    int virq;                   /* Virtual IRQ index */
+    QLIST_ENTRY(MSIRouteEntry) list;
+};
+
+/* List of used GSI routes */
+static QLIST_HEAD(, MSIRouteEntry) msi_route_list = \
+    QLIST_HEAD_INITIALIZER(msi_route_list);
+
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    MSIRouteEntry *entry;
+
+    if (!dev) {
+        /* These are (possibly) IOAPIC routes only used for split
+         * kernel irqchip mode, while what we are housekeeping are
+         * PCI devices only. */
+        return 0;
+    }
+
+    entry = g_new0(MSIRouteEntry, 1);
+    entry->dev = dev;
+    entry->vector = vector;
+    entry->virq = route->gsi;
+    QLIST_INSERT_HEAD(&msi_route_list, entry, list);
+
+    trace_kvm_x86_add_msi_route(route->gsi);
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    MSIRouteEntry *entry, *next;
+    QLIST_FOREACH_SAFE(entry, &msi_route_list, list, next) {
+        if (entry->virq == virq) {
+            trace_kvm_x86_remove_msi_route(virq);
+            QLIST_REMOVE(entry, list);
+            break;
+        }
+    }
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     abort();
diff --git a/target-mips/kvm.c b/target-mips/kvm.c
index f3f832d..dcf5fbb 100644
--- a/target-mips/kvm.c
+++ b/target-mips/kvm.c
@@ -1043,6 +1043,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     abort();
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index 7a8f555..91e6daf 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -2621,6 +2621,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     return data & 0xffff;
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index 2991bff..80ac621 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -2267,6 +2267,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     abort();
diff --git a/target-i386/trace-events b/target-i386/trace-events
index 2113075..818058c 100644
--- a/target-i386/trace-events
+++ b/target-i386/trace-events
@@ -2,3 +2,5 @@
 
 # target-i386/kvm.c
 kvm_x86_fixup_msi_error(uint32_t gsi) "VT-d failed to remap interrupt for GSI %" PRIu32
+kvm_x86_add_msi_route(int virq) "Adding route entry for virq %d"
+kvm_x86_remove_msi_route(int virq) "Removing route entry for virq %d"
-- 
MST


WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Peter Xu <peterx@redhat.com>, Paolo Bonzini <pbonzini@redhat.com>,
	Marcelo Tosatti <mtosatti@redhat.com>,
	Richard Henderson <rth@twiddle.net>,
	Eduardo Habkost <ehabkost@redhat.com>,
	James Hogan <james.hogan@imgtec.com>,
	Aurelien Jarno <aurelien@aurel32.net>,
	Leon Alrae <leon.alrae@imgtec.com>,
	Alexander Graf <agraf@suse.de>,
	David Gibson <david@gibson.dropbear.id.au>,
	Christian Borntraeger <borntraeger@de.ibm.com>,
	Cornelia Huck <cornelia.huck@de.ibm.com>,
	kvm@vger.kernel.org, qemu-arm@nongnu.org, qemu-ppc@nongnu.org
Subject: [Qemu-devel] [PULL v2 30/55] kvm-irqchip: i386: add hook for add/remove virq
Date: Tue, 19 Jul 2016 20:53:20 +0300	[thread overview]
Message-ID: <20160719175320.GA341@redhat.com> (raw)
In-Reply-To: <1468950176-31959-1-git-send-email-mst@redhat.com>

From: Peter Xu <peterx@redhat.com>

Adding two hooks to be notified when adding/removing msi routes. There
are two kinds of MSI routes:

- in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by
  vhost, vfio, etc.

- in kvm_irqchip_send_msi(): when sending direct MSI message, if
  direct MSI not allowed, we will first create one MSI route entry
  in the kernel, then trigger it.

This patch only hooks the first one (irqfd case). We do not need to
take care for the 2nd one, since it's only used by QEMU userspace
(kvm-apic) and the messages will always do in-time translation when
triggered. While we need to note them down for the 1st one, so that we
can notify the kernel when cache invalidation happens.

Also, we do not hook IOAPIC msi routes (we have explicit notifier for
IOAPIC to keep its cache updated). We only need to care about irqfd
users.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/sysemu/kvm.h     |  6 ++++++
 kvm-all.c                |  2 ++
 target-arm/kvm.c         | 11 +++++++++++
 target-i386/kvm.c        | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
 target-mips/kvm.c        | 11 +++++++++++
 target-ppc/kvm.c         | 11 +++++++++++
 target-s390x/kvm.c       | 11 +++++++++++
 target-i386/trace-events |  2 ++
 8 files changed, 102 insertions(+)

diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index e5d90bd..0a16e0e 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -359,6 +359,12 @@ void kvm_arch_init_irq_routing(KVMState *s);
 int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
                              uint64_t address, uint32_t data, PCIDevice *dev);
 
+/* Notify arch about newly added MSI routes */
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev);
+/* Notify arch about released MSI routes */
+int kvm_arch_release_virq_post(int virq);
+
 int kvm_arch_msi_data_to_gsi(uint32_t data);
 
 int kvm_set_irq(KVMState *s, int irq, int level);
diff --git a/kvm-all.c b/kvm-all.c
index d94c0e4..69ff658 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -1133,6 +1133,7 @@ void kvm_irqchip_release_virq(KVMState *s, int virq)
         }
     }
     clear_gsi(s, virq);
+    kvm_arch_release_virq_post(virq);
 }
 
 static unsigned int kvm_hash_msi(uint32_t data)
@@ -1281,6 +1282,7 @@ int kvm_irqchip_add_msi_route(KVMState *s, int vector, PCIDevice *dev)
     }
 
     kvm_add_routing_entry(s, &kroute);
+    kvm_arch_add_msi_route_post(&kroute, vector, dev);
     kvm_irqchip_commit_routes(s);
 
     return virq;
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index 5c2bd7a..dbe393c 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -622,6 +622,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     return (data - 32) & 0xffff;
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index f574513..8875034 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -3400,6 +3400,54 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+typedef struct MSIRouteEntry MSIRouteEntry;
+
+struct MSIRouteEntry {
+    PCIDevice *dev;             /* Device pointer */
+    int vector;                 /* MSI/MSIX vector index */
+    int virq;                   /* Virtual IRQ index */
+    QLIST_ENTRY(MSIRouteEntry) list;
+};
+
+/* List of used GSI routes */
+static QLIST_HEAD(, MSIRouteEntry) msi_route_list = \
+    QLIST_HEAD_INITIALIZER(msi_route_list);
+
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    MSIRouteEntry *entry;
+
+    if (!dev) {
+        /* These are (possibly) IOAPIC routes only used for split
+         * kernel irqchip mode, while what we are housekeeping are
+         * PCI devices only. */
+        return 0;
+    }
+
+    entry = g_new0(MSIRouteEntry, 1);
+    entry->dev = dev;
+    entry->vector = vector;
+    entry->virq = route->gsi;
+    QLIST_INSERT_HEAD(&msi_route_list, entry, list);
+
+    trace_kvm_x86_add_msi_route(route->gsi);
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    MSIRouteEntry *entry, *next;
+    QLIST_FOREACH_SAFE(entry, &msi_route_list, list, next) {
+        if (entry->virq == virq) {
+            trace_kvm_x86_remove_msi_route(virq);
+            QLIST_REMOVE(entry, list);
+            break;
+        }
+    }
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     abort();
diff --git a/target-mips/kvm.c b/target-mips/kvm.c
index f3f832d..dcf5fbb 100644
--- a/target-mips/kvm.c
+++ b/target-mips/kvm.c
@@ -1043,6 +1043,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     abort();
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index 7a8f555..91e6daf 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -2621,6 +2621,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     return data & 0xffff;
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index 2991bff..80ac621 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -2267,6 +2267,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
     return 0;
 }
 
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+                                int vector, PCIDevice *dev)
+{
+    return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+    return 0;
+}
+
 int kvm_arch_msi_data_to_gsi(uint32_t data)
 {
     abort();
diff --git a/target-i386/trace-events b/target-i386/trace-events
index 2113075..818058c 100644
--- a/target-i386/trace-events
+++ b/target-i386/trace-events
@@ -2,3 +2,5 @@
 
 # target-i386/kvm.c
 kvm_x86_fixup_msi_error(uint32_t gsi) "VT-d failed to remap interrupt for GSI %" PRIu32
+kvm_x86_add_msi_route(int virq) "Adding route entry for virq %d"
+kvm_x86_remove_msi_route(int virq) "Removing route entry for virq %d"
-- 
MST

  parent reply	other threads:[~2016-07-19 17:53 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-19 22:29 [Qemu-devel] [PULL v2 00/55] pc, pci, virtio: new features, cleanups, fixes Michael S. Tsirkin
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 01/55] nvdimm: fix memory leak in error code path Michael S. Tsirkin
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 02/55] tests/prom-env-test: increase the test timeout Michael S. Tsirkin
2016-07-20  0:10   ` David Gibson
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 03/55] hw/alpha: fix PCI bus initialization Michael S. Tsirkin
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 04/55] hw/mips: " Michael S. Tsirkin
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 05/55] hw/apb: " Michael S. Tsirkin
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 06/55] hw/grackle: " Michael S. Tsirkin
2016-07-19 17:50 ` [Qemu-devel] [PULL v2 07/55] hw/prep: realize the PCI root bus as part of the prep init Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-arm] [PULL v2 08/55] hw/versatile: realize the PCI root bus as part of the versatile init Michael S. Tsirkin
2016-07-19 17:51   ` [Qemu-devel] " Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 09/55] x86-iommu: introduce parent class Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 10/55] intel_iommu: rename VTD_PCI_DEVFN_MAX to x86-iommu Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 11/55] x86-iommu: provide x86_iommu_get_default Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 12/55] x86-iommu: introduce "intremap" property Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 13/55] acpi: enable INTR for DMAR report structure Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 14/55] intel_iommu: allow queued invalidation for IR Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 15/55] intel_iommu: set IR bit for ECAP register Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 16/55] acpi: add DMAR scope definition for root IOAPIC Michael S. Tsirkin
2016-07-19 17:51 ` [Qemu-devel] [PULL v2 17/55] intel_iommu: define interrupt remap table addr register Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 18/55] intel_iommu: handle interrupt remap enable Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 19/55] intel_iommu: define several structs for IOMMU IR Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 20/55] intel_iommu: add IR translation faults defines Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 21/55] intel_iommu: Add support for PCI MSI remap Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 22/55] q35: ioapic: add support for emulated IOAPIC IR Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 23/55] ioapic: introduce ioapic_entry_parse() helper Michael S. Tsirkin
2016-07-19 17:52 ` [PULL v2 24/55] intel_iommu: add support for split irqchip Michael S. Tsirkin
2016-07-19 17:52   ` [Qemu-devel] " Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 25/55] x86-iommu: introduce IEC notifiers Michael S. Tsirkin
2016-07-19 17:52 ` [Qemu-devel] [PULL v2 26/55] ioapic: register IOMMU IEC notifier for ioapic Michael S. Tsirkin
2016-07-19 17:53 ` [Qemu-devel] [PULL v2 27/55] intel_iommu: Add support for Extended Interrupt Mode Michael S. Tsirkin
2016-07-19 17:53 ` [Qemu-devel] [PULL v2 28/55] intel_iommu: add SID validation for IR Michael S. Tsirkin
2016-07-19 17:53 ` [PULL v2 29/55] kvm-irqchip: simplify kvm_irqchip_add_msi_route Michael S. Tsirkin
2016-07-19 17:53   ` [Qemu-devel] " Michael S. Tsirkin
2016-07-19 17:53 ` Michael S. Tsirkin [this message]
2016-07-19 17:53   ` [Qemu-devel] [PULL v2 30/55] kvm-irqchip: i386: add hook for add/remove virq Michael S. Tsirkin
2016-07-19 17:53 ` [PULL v2 31/55] kvm-irqchip: x86: add msi route notify fn Michael S. Tsirkin
2016-07-19 17:53   ` [Qemu-devel] " Michael S. Tsirkin
2016-07-19 17:53 ` [PULL v2 32/55] kvm-irqchip: do explicit commit when update irq Michael S. Tsirkin
2016-07-19 17:53   ` [Qemu-devel] " Michael S. Tsirkin
2016-07-19 17:53 ` [Qemu-devel] [PULL v2 33/55] intel_iommu: support all masks in interrupt entry cache invalidation Michael S. Tsirkin
2016-07-19 17:53 ` [PULL v2 34/55] kvm-all: add trace events for kvm irqchip ops Michael S. Tsirkin
2016-07-19 17:53   ` [Qemu-devel] " Michael S. Tsirkin
2016-07-19 17:53 ` [Qemu-devel] [PULL v2 35/55] intel_iommu: disallow kernel-irqchip=on with IR Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 36/55] virtio: Add typedef for handle_output Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 37/55] virtio: Introduce virtio_add_queue_aio Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 38/55] virtio-blk: Call virtio_add_queue_aio Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 39/55] virtio-scsi: " Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 40/55] Revert "mirror: Workaround for unexpected iohandler events during completion" Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 41/55] virtio-scsi: Replace HandleOutput typedef Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 42/55] virtio-net: Remove old migration version support Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 43/55] virtio-serial: " Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 44/55] virtio: Migration helper function and macro Michael S. Tsirkin
2016-07-19 17:54 ` [Qemu-devel] [PULL v2 45/55] virtio-scsi: Wrap in vmstate Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 46/55] virtio-blk: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 47/55] virtio-rng: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 48/55] virtio-balloon: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 49/55] virtio-net: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 50/55] virtio-serial: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 51/55] 9pfs: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 52/55] virtio-input: " Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 53/55] virtio-gpu: Use migrate_add_blocker for virgl migration blocking Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 54/55] virtio-gpu: Wrap in vmstate Michael S. Tsirkin
2016-07-19 17:55 ` [Qemu-devel] [PULL v2 55/55] virtio: Update migration docs Michael S. Tsirkin
2016-07-20 16:01 ` [Qemu-devel] [PULL v2 00/55] pc, pci, virtio: new features, cleanups, fixes Peter Maydell
2016-07-21  6:39   ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160719175320.GA341@redhat.com \
    --to=mst@redhat.com \
    --cc=agraf@suse.de \
    --cc=aurelien@aurel32.net \
    --cc=borntraeger@de.ibm.com \
    --cc=cornelia.huck@de.ibm.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=ehabkost@redhat.com \
    --cc=james.hogan@imgtec.com \
    --cc=kvm@vger.kernel.org \
    --cc=leon.alrae@imgtec.com \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=peterx@redhat.com \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.