From: John Stultz <john.stultz@linaro.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Jon Hunter <jonathanh@nvidia.com>,
Marc Zyngier <marc.zyngier@arm.com>,
lkml <linux-kernel@vger.kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>
Subject: Re: [Regression] "irqdomain: Don't set type when mapping an IRQ" breaks nexus7 gpio buttons
Date: Fri, 5 Aug 2016 11:12:53 -0700 [thread overview]
Message-ID: <20160805181253.GA18546@buildbox> (raw)
In-Reply-To: <alpine.DEB.2.11.1607301006160.19896@nanos>
[-- Attachment #1: Type: text/plain, Size: 1011 bytes --]
On Sat, Jul 30, 2016 at 1:07 AM, Thomas Gleixner <tglx@linutronix.de> wrote:
> On Fri, 29 Jul 2016, John Stultz wrote:
>> Hey Jon,
>> So after rebasing my nexus7 patch stack onto pre-4.8-rc1 tree, I
>> noticed the power/volume buttons stopped working.
>>
>> I did a manual rebased bisection and chased it down to your commit
>> 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ").
>>
>> Reverting that patch makes things work again, so I wanted to see if
>> there was any debugging info I could provide to try to help narrow
>> down the problem here. (Sorry, I'd tinker myself with it some and try
>> to debug the issue, but after burning my friday night on this, I'm
>> eager to get away from the keyboard for the weekend).
>
> dmesg should contain debug output which yells about non matching types. Can
> you provide that?
I'm not seeing anything about problematic type matching in the dmesg.
I've also added LinusW's patches but that didn't seem to help either.
dmesg attached.
thanks
-john
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: flo-noirq.dmesg --]
[-- Type: text/plain; charset=utf-8, Size: 23569 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.7.0-11903-g0ab3b2f (jstultz@buildbox) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1413 SMP PREEMPT Fri Aug 5 11:04:12 PDT 2016
[ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: Asus Nexus7(flo)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 512255
[ 0.000000] free_area_init_node: node 0, pgdat c0d75d80, node_mem_map e93fe000
[ 0.000000] Normal zone: 1348 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 161024 pages, LIFO batch:31
[ 0.000000] HighMem zone: 351231 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 13 pages/cpu @e93a6000 s30464 r0 d22784 u53248
[ 0.000000] pcpu-alloc: s30464 r0 d22784 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510907
[ 0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 console=ttyMSM0,115200,n8 androidboot.selinux=permissive vmalloc=340MÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPAEHÚ |\x01 androidboot.emmc=true androidboot.serialno=0ac0e39c bootreason=Reboot fuse_info=Y ddr_vendor=hynix androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.05
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2019688K/2049020K available (7168K kernel code, 546K rwdata, 1800K rodata, 1024K init, 356K bss, 29332K reserved, 0K cma-reserved, 1404924K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xea800000 - 0xff800000 ( 336 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xea400000 ( 676 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a00000 (8160 kB)
[ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB)
[ 0.000000] .data : 0xc0d00000 - 0xc0d88828 ( 547 kB)
[ 0.000000] .bss : 0xc0d8a000 - 0xc0de32b4 ( 357 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 283149695806 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 148ns, wraps every 318145725365ns
[ 0.000026] Switching to timer-based delay loop, resolution 148ns
[ 0.000459] Console: colour dummy device 80x30
[ 0.000496] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
[ 0.000523] pid_max: default: 32768 minimum: 301
[ 0.000613] Security Framework initialized
[ 0.000636] SELinux: Initializing.
[ 0.000712] SELinux: Starting in permissive mode
[ 0.000769] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000785] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001767] CPU: Testing write buffer coherency: ok
[ 0.002227] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002288] Setting up static identity map for 0x80300000 - 0x80300058
[ 0.123347] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.163780] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.204307] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.204646] Brought up 4 CPUs
[ 0.204679] SMP: Total of 4 processors activated (54.00 BogoMIPS).
[ 0.204696] CPU: All CPU(s) started in SVC mode.
[ 0.207763] devtmpfs: initialized
[ 0.220432] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
[ 0.220947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.221199] pinctrl core: initialized pinctrl subsystem
[ 0.222655] NET: Registered protocol family 16
[ 0.223179] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.264168] cpuidle: using governor menu
[ 0.264535] hw-breakpoint: Failed to enable monitor mode on CPU 3.
[ 0.264548] hw-breakpoint: Failed to enable monitor mode on CPU 1.
[ 0.264560] hw-breakpoint: Failed to enable monitor mode on CPU 2.
[ 0.278269] qcom_rpm 108000.rpm: RPM firmware 3.0.16842936
[ 0.327983] s1: Bringing 0uV into 1225000-1225000uV
[ 0.328725] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
[ 0.328744] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s2
[ 0.329093] s3: Bringing 0uV into 500000-500000uV
[ 0.329471] s4: Bringing 0uV into 1800000-1800000uV
[ 0.330413] s7: Bringing 0uV into 1300000-1300000uV
[ 0.330789] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
[ 0.330807] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s8
[ 0.331270] l1: supplied by s4
[ 0.331793] l2: supplied by s4
[ 0.331904] l2: Bringing 0uV into 1200000-1200000uV
[ 0.332355] l3: Bringing 0uV into 3075000-3075000uV
[ 0.332838] l4: Bringing 0uV into 1800000-1800000uV
[ 0.333351] l5: Bringing 0uV into 2950000-2950000uV
[ 0.334409] l6: Bringing 0uV into 2950000-2950000uV
[ 0.337719] l11: Bringing 0uV into 3000000-3000000uV
[ 0.338530] l12: supplied by s4
[ 0.342047] l17: Bringing 0uV into 3000000-3000000uV
[ 0.343084] l18: supplied by s4
[ 0.346576] l23: Bringing 0uV into 1800000-1800000uV
[ 0.347839] l24: supplied by s1
[ 0.349235] l25: supplied by s1
[ 0.349333] l25: Bringing 0uV into 1250000-1250000uV
[ 0.350665] l26: supplied by s7
[ 0.352114] l27: supplied by s7
[ 0.353570] l28: supplied by s7
[ 0.356649] lvs1: supplied by s4
[ 0.358226] lvs2: supplied by s1
[ 0.359832] lvs3: supplied by s4
[ 0.361519] lvs4: supplied by s4
[ 0.363206] lvs5: supplied by s4
[ 0.364933] lvs6: supplied by s4
[ 0.366772] lvs7: supplied by s4
[ 0.372123] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
[ 0.372141] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator ncp
[ 0.372279] ncp: supplied by l6
[ 0.374869] SCSI subsystem initialized
[ 0.375223] usbcore: registered new interface driver usbfs
[ 0.375305] usbcore: registered new interface driver hub
[ 0.375583] usbcore: registered new device driver usb
[ 0.376583] Advanced Linux Sound Architecture Driver Initialized.
[ 0.379194] clocksource: Switched to clocksource dg_timer
[ 0.475512] NET: Registered protocol family 2
[ 0.476304] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.476375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.476470] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.476555] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.476590] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.476822] NET: Registered protocol family 1
[ 0.477375] Trying to unpack rootfs image as initramfs...
[ 0.542772] Freeing initrd memory: 900K (c2200000 - c22e1000)
[ 0.543450] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
[ 0.545665] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.545734] audit: initializing netlink subsys (disabled)
[ 0.545833] audit: type=2000 audit(0.539:1): initialized
[ 0.547209] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 0.557442] fuse init (API version 7.25)
[ 0.558310] SELinux: Registering netfilter hooks
[ 0.566548] bounce: pool size: 64 pages
[ 0.566639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.566662] io scheduler noop registered
[ 0.566677] io scheduler deadline registered
[ 0.566731] io scheduler cfq registered (default)
[ 0.571896] gsbi 12440000.gsbi: GSBI port protocol: 2 crci: 0
[ 0.572621] gsbi 16200000.gsbi: GSBI port protocol: 2 crci: 0
[ 0.573146] gsbi 16500000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.574138] gsbi 16600000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.575667] msm_serial 16540000.serial: msm_serial: detected port #1
[ 0.575760] msm_serial 16540000.serial: uartclk = 27000000
[ 0.575838] 16540000.serial: ttyMSM1 at MMIO 0x16540000 (irq = 121, base_baud = 1687500) is a MSM
[ 0.576515] msm_serial 16640000.serial: msm_serial: detected port #0
[ 0.576600] msm_serial 16640000.serial: uartclk = 1843200
[ 0.576667] 16640000.serial: ttyMSM0 at MMIO 0x16640000 (irq = 123, base_baud = 115200) is a MSM
[ 0.576716] msm_serial: console setup on port #0
[ 1.339702] console [ttyMSM0] enabled
[ 1.344883] msm_serial: driver initialized
[ 1.372207] brd: module loaded
[ 1.383806] loop: module loaded
[ 1.384166] ssbi 500000.qcom,ssbi: SSBI controller type: 'pmic-arbiter'
[ 1.386317] pm8921_probe: PMIC revision 1: F4
[ 1.392516] pm8921_probe: PMIC revision 2: 06
[ 1.406860] SCSI Media Changer driver v0.25
[ 1.409002] libphy: Fixed MDIO Bus: probed
[ 1.410360] tun: Universal TUN/TAP device driver, 1.6
[ 1.414104] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.419983] PPP generic driver version 2.4.2
[ 1.425769] PPP BSD Compression module registered
[ 1.429811] PPP Deflate Compression module registered
[ 1.434351] PPP MPPE Compression module registered
[ 1.439455] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.444058] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.453858] usbcore: registered new interface driver ax88179_178a
[ 1.461039] usbcore: registered new interface driver cdc_ether
[ 1.467203] usbcore: registered new interface driver net1080
[ 1.473020] usbcore: registered new interface driver cdc_subset
[ 1.478763] usbcore: registered new interface driver cdc_ncm
[ 1.484801] msm_otg 12500000.phy: OTG regs = ea92c000
[ 1.610285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.610348] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 1.616407] usbcore: registered new interface driver cdc_acm
[ 1.621276] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.627153] usbcore: registered new interface driver usb-storage
[ 1.635020] usbcore: registered new interface driver usbserial
[ 1.648234] mousedev: PS/2 mouse device common for all mice
[ 1.649570] input: pmic8xxx_pwrkey as /devices/platform/soc/500000.qcom,ssbi/500000.qcom,ssbi:pmic@0/500000.qcom,ssbi:pmic@0:pwrkey@1c/input/input0
[ 1.654673] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: rtc core: registered pm8xxx_rtc as rtc0
[ 1.666036] i2c /dev entries driver
[ 1.678160] apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by 16540000.serial; cannot claim for 16580000.i2c
[ 1.678207] apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22
[ 1.678362] 1-0010 supply vcc33 not found, using dummy regulator
[ 1.678779] 1-0010 supply vccio not found, using dummy regulator
[ 1.702427] apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16) from group gpio16 on device 800000.pinctrl
[ 1.708353] i2c_qup 16580000.i2c: Error applying setting, reverse things back
[ 1.721193] bq27xxx-battery 0-0055: support ver. 1.2.0 enabled
[ 1.744176] device-mapper: uevent: version 1.0.3
[ 1.745346] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.750077] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 118,0 (pio)
[ 1.756470] mmci-pl18x 12400000.sdcc: DMA channels RX dma0chan1, TX dma0chan2
[ 1.765137] s4: voltage operation not allowed
[ 1.771830] mmci-pl18x 12400000.sdcc: Voltage switch failed
[ 1.779388] msm_otg 12500000.phy: Avail curr from USB = 100
[ 1.823366] input: Elan Touchscreen as /devices/platform/soc/16200000.gsbi/16280000.i2c/i2c-1/1-0010/input/input1
[ 1.829545] sdhci: Secure Digital Host Controller Interface driver
[ 1.832695] sdhci: Copyright(c) Pierre Ossman
[ 1.839743] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.845554] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.849544] usbcore: registered new interface driver usbhid
[ 1.854200] usbhid: USB HID core driver
[ 1.860207] ashmem: initialized
[ 1.882659] oprofile: using timer interrupt.
[ 1.882829] u32 classifier
[ 1.885992] Actions configured
[ 1.888521] Netfilter messages via NETLINK v0.30.
[ 1.892458] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.897323] ctnetlink v0.93: registering with nfnetlink.
[ 1.903039] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 1.908589] xt_time: kernel timezone is -0000
[ 1.914959] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.919457] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.924395] Initializing XFRM netlink socket
[ 1.931085] NET: Registered protocol family 10
[ 1.936032] mip6: Mobile IPv6
[ 1.938458] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.941842] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.947793] NET: Registered protocol family 17
[ 1.952730] NET: Registered protocol family 15
[ 1.957476] Registering SWP/SWPB emulation handler
[ 1.965391] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[ 1.967226] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: setting system clock to 2016-08-05 18:04:52 UTC (1470420292)
[ 1.996762] ext_3p3v: disabling
[ 1.997670] ALSA device list:
[ 1.998718] No soundcards found.
[ 2.003445] mmc0: new high speed MMC card at address 0001
[ 2.006240] mmcblk0: mmc0:0001 016GE2 14.7 GiB
[ 2.011830] mmcblk0boot0: mmc0:0001 016GE2 partition 1 4.00 MiB
[ 2.012502] mmcblk0boot1: mmc0:0001 016GE2 partition 2 4.00 MiB
[ 2.013667] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000)
[ 2.023550] mmcblk0rpmb: mmc0:0001 016GE2 partition 3 4.00 MiB
[ 2.034144] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
[ 2.050694] init: init started!
[ 2.075616] SELinux: 2048 avtab hash slots, 5414 rules.
[ 2.079089] SELinux: Android master kernel running Android M policy in compatibility mode.
[ 2.093626] SELinux: 2048 avtab hash slots, 5414 rules.
[ 2.093735] SELinux: 1 users, 2 roles, 581 types, 0 bools, 1 sens, 1024 cats
[ 2.093787] SELinux: 87 classes, 5414 rules
[ 2.098908] SELinux: Permission validate_trans in class security not defined in policy.
[ 2.099060] SELinux: Permission module_load in class system not defined in policy.
[ 2.107326] SELinux: Class netlink_iscsi_socket not defined in policy.
[ 2.113662] SELinux: Class netlink_fib_lookup_socket not defined in policy.
[ 2.120187] SELinux: Class netlink_connector_socket not defined in policy.
[ 2.127367] SELinux: Class netlink_netfilter_socket not defined in policy.
[ 2.134255] SELinux: Class netlink_generic_socket not defined in policy.
[ 2.141091] SELinux: Class netlink_scsitransport_socket not defined in policy.
[ 2.147939] SELinux: Class netlink_rdma_socket not defined in policy.
[ 2.155158] SELinux: Class netlink_crypto_socket not defined in policy.
[ 2.161919] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 2.168575] SELinux: Class cap_userns not defined in policy.
[ 2.176337] SELinux: Class cap2_userns not defined in policy.
[ 2.182258] SELinux: the above unknown classes and permissions will be denied
[ 2.187944] SELinux: Completing initialization.
[ 2.187960] SELinux: Setting up existing superblocks.
[ 2.319904] audit: type=1403 audit(1470420292.849:2): policy loaded auid=4294967295 ses=4294967295
[ 2.321917] init: (Initializing SELinux non-enforcing took 0.27s.)
[ 2.378846] init: init second stage started!
[ 2.568874] init: waitpid failed: No child processes
[ 2.570383] init: (Loading properties from /default.prop took 0.00s.)
[ 2.583174] init: (Parsing /init.environ.rc took 0.00s.)
[ 2.584847] init: (Parsing /init.usb.rc took 0.00s.)
[ 2.593192] init: (Parsing init.flo.usb.rc took 0.00s.)
[ 2.593563] init: (Parsing init.flo.diag.rc took 0.00s.)
[ 2.597559] init: (Parsing /init.flo.rc took 0.01s.)
[ 2.605660] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[ 2.608448] init: (Parsing /init.zygote32.rc took 0.00s.)
[ 2.618378] audit: type=1400 audit(1470420293.139:3): avc: denied { mounton } for pid=1 comm="init" path="/sys/kernel/debug" dev="debugfs" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
[ 2.622672] ueventd: ueventd started!
[ 3.180479] ueventd: Coldboot took 0.53s.
[ 3.353090] audit: type=1400 audit(1470420293.879:4): avc: denied { write } for pid=1 comm="init" name="cpu" dev="proc" ino=4026531912 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=dir permissive=1
[ 3.353317] audit: type=1400 audit(1470420293.879:5): avc: denied { add_name } for pid=1 comm="init" name="alignment" scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=dir permissive=1
[ 3.370990] audit: type=1400 audit(1470420293.899:6): avc: denied { create } for pid=1 comm="init" name="alignment" scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[ 3.397979] audit: type=1400 audit(1470420293.919:7): avc: denied { create } for pid=1 comm="init" name="cpu.shares" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
[ 3.440034] EXT4-fs (mmcblk0p22): mounted filesystem without journal. Opts: barrier=1
[ 3.443034] audit: type=1400 audit(1470420293.969:8): avc: denied { mounton } for pid=113 comm="init" path="/cache" dev="rootfs" ino=9243 scontext=u:r:init:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=1
[ 3.447674] EXT4-fs (mmcblk0p23): Ignoring removed nomblk_io_submit option
[ 3.474315] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 3.515264] random: fast init done
[ 3.682524] audit: type=1400 audit(1470420294.209:9): avc: denied { getattr } for pid=118 comm="e2fsck" path="/dev/block/mmcblk0p23" dev="tmpfs" ino=8416 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
[ 3.683207] audit: type=1400 audit(1470420294.209:10): avc: denied { read } for pid=118 comm="e2fsck" name="mmcblk0p23" dev="tmpfs" ino=8416 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
[ 3.718336] EXT4-fs (mmcblk0p23): Ignoring removed nomblk_io_submit option
[ 3.732767] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,errors=panic
[ 3.736337] EXT4-fs (mmcblk0p30): Ignoring removed nomblk_io_submit option
[ 3.754923] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 4.021422] EXT4-fs (mmcblk0p30): Ignoring removed nomblk_io_submit option
[ 4.032191] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,errors=panic
[ 4.043903] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
[ 4.245507] logd.auditd: start
[ 4.245733] logd.klogd: 4246495553
[ 4.484262] binder: 143:143 transaction failed 29189, size 0-0
[ 4.521095] file system registered
[ 4.522644] type=1400 audit(1470420295.039:16): avc: denied { associate } for pid=1 comm="init" name="g1" scontext=u:object_r:unlabeled:s0 tcontext=u:object_r:unlabeled:s0 tclass=filesystem permissive=1
[ 4.549652] type=1400 audit(1470420295.059:17): avc: denied { write } for pid=32 comm="kdevtmpfs" name="/" dev="devtmpfs" ino=1025 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
[ 4.552119] type=1400 audit(1470420295.059:18): avc: denied { mknod } for pid=32 comm="kdevtmpfs" capability=27 scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=capability permissive=1
[ 4.577782] logd.daemon: reinit
[ 4.624654] type=1400 audit(1470420295.059:19): avc: denied { add_name } for pid=32 comm="kdevtmpfs" name="mtp_usb" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
[ 4.780015] read descriptors
[ 4.780100] read strings
[ 4.873189] type=1400 audit(1470420295.059:20): avc: denied { create } for pid=32 comm="kdevtmpfs" name="mtp_usb" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 4.891134] type=1400 audit(1470420295.059:21): avc: denied { setattr } for pid=32 comm="kdevtmpfs" name="mtp_usb" dev="devtmpfs" ino=1227 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[ 4.891615] type=1400 audit(1470420295.069:22): avc: denied { mount } for pid=1 comm="init" name="/" dev="tracefs" ino=1 scontext=u:r:kernel:s0 tcontext=u:object_r:unlabeled:s0 tclass=filesystem permissive=1
[ 5.185119] android_work: sent uevent USB_STATE=CONNECTED
[ 5.188892] android_work: sent uevent USB_STATE=DISCONNECTED
[ 5.293100] android_work: sent uevent USB_STATE=CONNECTED
[ 5.295648] configfs-gadget gadget: high-speed config #1: b
[ 5.297556] msm_otg 12500000.phy: Avail curr from USB = 500
[ 5.303372] android_work: sent uevent USB_STATE=CONFIGURED
[ 5.491990] healthd: No charger supplies found
[ 9.527933] init: Starting service 'netd'...
[ 9.531934] init: Starting service 'surfaceflinger'...
[ 9.535424] init: Starting service 'media'...
[ 9.540183] init: Starting service 'zygote'...
[ 10.564509] init: Service 'surfaceflinger' (pid 223) killed by signal 6
[ 10.564602] init: Service 'surfaceflinger' (pid 223) killing any children in process group
[ 10.570165] init: Service 'zygote' is being killed...
[ 10.596251] init: Service 'zygote' (pid 225) killed by signal 9
[ 10.596340] init: Service 'zygote' (pid 225) killing any children in process group
[ 10.601333] init: write_file: Unable to open '/sys/android_power/request_state': No such file or directory
[ 14.985486] init: Starting service 'media'...
next prev parent reply other threads:[~2016-08-05 18:13 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-30 4:39 [Regression] "irqdomain: Don't set type when mapping an IRQ" breaks nexus7 gpio buttons John Stultz
2016-07-30 4:52 ` Bjorn Andersson
2016-07-30 11:10 ` Marc Zyngier
2016-07-30 8:07 ` Thomas Gleixner
2016-08-05 18:12 ` John Stultz [this message]
2016-08-08 9:04 ` Jon Hunter
2016-08-08 21:50 ` Linus Walleij
2016-08-08 21:35 ` Linus Walleij
2016-08-01 10:26 ` Jon Hunter
2016-08-05 23:45 ` John Stultz
2016-08-08 9:31 ` Jon Hunter
2016-08-09 4:25 ` John Stultz
2016-08-09 13:20 ` Jon Hunter
2016-08-09 15:08 ` Marc Zyngier
2016-08-09 23:03 ` Linus Walleij
2016-08-10 9:41 ` Marc Zyngier
2016-08-10 9:56 ` Jon Hunter
2016-08-10 10:21 ` Marc Zyngier
2016-08-10 13:58 ` Linus Walleij
2016-08-10 14:12 ` Jon Hunter
2016-08-10 22:06 ` Linus Walleij
2016-08-10 13:50 ` Linus Walleij
2016-08-10 15:17 ` Marc Zyngier
2016-08-10 22:14 ` Linus Walleij
2016-08-08 21:48 ` Linus Walleij
2016-08-11 8:37 ` Marc Zyngier
2016-08-11 9:47 ` Jon Hunter
2016-08-11 11:45 ` Marc Zyngier
2016-08-11 11:53 ` Marc Zyngier
2016-08-11 12:46 ` Marc Zyngier
2016-08-11 13:29 ` Jon Hunter
2016-08-11 13:34 ` Marc Zyngier
2016-08-11 15:32 ` John Stultz
2016-08-11 15:51 ` Marc Zyngier
2016-08-11 21:08 ` Linus Walleij
2016-08-11 21:23 ` Bjorn Andersson
2016-08-12 10:22 ` Marc Zyngier
2016-08-11 12:01 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160805181253.GA18546@buildbox \
--to=john.stultz@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.