[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Krzysztof Kozlowski]

The "linux,stdout-path" is deprecated.

Add serial options so the console can be properly configured when
bootloader does not pass "console" parameter to command line.  Without
options and lack of "console", the serial output dies during boot (just
after probing sound).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index f6d135245a4b..a5ae76c1838f 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	emmc_pwrseq: pwrseq {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index d56253049ccb..d04490d40b07 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@02073000 {
-- 
1.9.1

[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Krzysztof Kozlowski]

The "linux,stdout-path" is deprecated.

Add serial options so the console can be properly configured when
bootloader does not pass "console" parameter to command line.  Without
options and lack of "console", the serial output dies during boot (just
after probing sound).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index f6d135245a4b..a5ae76c1838f 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	emmc_pwrseq: pwrseq {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index d56253049ccb..d04490d40b07 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	firmware at 02073000 {
-- 
1.9.1

Re: [PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Mark Rutland]

On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
> The "linux,stdout-path" is deprecated.
> 
> Add serial options so the console can be properly configured when
> bootloader does not pass "console" parameter to command line.  Without
> options and lack of "console", the serial output dies during boot (just
> after probing sound).

I'm confused. Is this just a cleanup (given "linux,stdout-path" is
deprecated but still supported), or a bug fix?

I guess that prior to this patch Linux might change the rate of the
console, but otherwise it should work.

Mark.

> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index f6d135245a4b..a5ae76c1838f 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -26,7 +26,7 @@
>  	};
>  
>  	chosen {
> -		linux,stdout-path = &serial_2;
> +		stdout-path = "serial2:115200n8";
>  	};
>  
>  	emmc_pwrseq: pwrseq {
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index d56253049ccb..d04490d40b07 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -26,7 +26,7 @@
>  	};
>  
>  	chosen {
> -		linux,stdout-path = &serial_2;
> +		stdout-path = "serial2:115200n8";
>  	};
>  
>  	firmware@02073000 {
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Mark Rutland]

On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
> The "linux,stdout-path" is deprecated.
> 
> Add serial options so the console can be properly configured when
> bootloader does not pass "console" parameter to command line.  Without
> options and lack of "console", the serial output dies during boot (just
> after probing sound).

I'm confused. Is this just a cleanup (given "linux,stdout-path" is
deprecated but still supported), or a bug fix?

I guess that prior to this patch Linux might change the rate of the
console, but otherwise it should work.

Mark.

> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index f6d135245a4b..a5ae76c1838f 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -26,7 +26,7 @@
>  	};
>  
>  	chosen {
> -		linux,stdout-path = &serial_2;
> +		stdout-path = "serial2:115200n8";
>  	};
>  
>  	emmc_pwrseq: pwrseq {
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index d56253049ccb..d04490d40b07 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -26,7 +26,7 @@
>  	};
>  
>  	chosen {
> -		linux,stdout-path = &serial_2;
> +		stdout-path = "serial2:115200n8";
>  	};
>  
>  	firmware at 02073000 {
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Mark Rutland]

On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
> The "linux,stdout-path" is deprecated.
> 
> Add serial options so the console can be properly configured when
> bootloader does not pass "console" parameter to command line.  Without
> options and lack of "console", the serial output dies during boot (just
> after probing sound).

I'm confused. Is this just a cleanup (given "linux,stdout-path" is
deprecated but still supported), or a bug fix?

I guess that prior to this patch Linux might change the rate of the
console, but otherwise it should work.

Mark.

> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5410-odroidxu.dts          | 2 +-
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> index f6d135245a4b..a5ae76c1838f 100644
> --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
> +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
> @@ -26,7 +26,7 @@
>  	};
>  
>  	chosen {
> -		linux,stdout-path = &serial_2;
> +		stdout-path = "serial2:115200n8";
>  	};
>  
>  	emmc_pwrseq: pwrseq {
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index d56253049ccb..d04490d40b07 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -26,7 +26,7 @@
>  	};
>  
>  	chosen {
> -		linux,stdout-path = &serial_2;
> +		stdout-path = "serial2:115200n8";
>  	};
>  
>  	firmware@02073000 {
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Krzysztof Kozlowski]

On 08/17/2016 12:25 PM, Mark Rutland wrote:
> On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
>> The "linux,stdout-path" is deprecated.
>>
>> Add serial options so the console can be properly configured when
>> bootloader does not pass "console" parameter to command line.  Without
>> options and lack of "console", the serial output dies during boot (just
>> after probing sound).
> 
> I'm confused. Is this just a cleanup (given "linux,stdout-path" is
> deprecated but still supported), or a bug fix?

There is no bug, so rather this is cleanup and improvement in one.
Usually we pass full console=ttySAC2,115200n8 from UBoot to command
line. The usage of serial options allows skipping that.

I can split the cleanup part from improvement. To me it looked a little
bit too much but I don't mind.

> I guess that prior to this patch Linux might change the rate of the
> console, but otherwise it should work.

It still can be overridden by command line if needed.

Best regards,
Krzysztof

[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Krzysztof Kozlowski]

On 08/17/2016 12:25 PM, Mark Rutland wrote:
> On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
>> The "linux,stdout-path" is deprecated.
>>
>> Add serial options so the console can be properly configured when
>> bootloader does not pass "console" parameter to command line.  Without
>> options and lack of "console", the serial output dies during boot (just
>> after probing sound).
> 
> I'm confused. Is this just a cleanup (given "linux,stdout-path" is
> deprecated but still supported), or a bug fix?

There is no bug, so rather this is cleanup and improvement in one.
Usually we pass full console=ttySAC2,115200n8 from UBoot to command
line. The usage of serial options allows skipping that.

I can split the cleanup part from improvement. To me it looked a little
bit too much but I don't mind.

> I guess that prior to this patch Linux might change the rate of the
> console, but otherwise it should work.

It still can be overridden by command line if needed.

Best regards,
Krzysztof

Re: [PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Mark Rutland]

On Wed, Aug 17, 2016 at 12:28:48PM +0200, Krzysztof Kozlowski wrote:
> On 08/17/2016 12:25 PM, Mark Rutland wrote:
> > On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
> >> The "linux,stdout-path" is deprecated.
> >>
> >> Add serial options so the console can be properly configured when
> >> bootloader does not pass "console" parameter to command line.  Without
> >> options and lack of "console", the serial output dies during boot (just
> >> after probing sound).
> > 
> > I'm confused. Is this just a cleanup (given "linux,stdout-path" is
> > deprecated but still supported), or a bug fix?
> 
> There is no bug, so rather this is cleanup and improvement in one.
> Usually we pass full console=ttySAC2,115200n8 from UBoot to command
> line. The usage of serial options allows skipping that.
> 
> I can split the cleanup part from improvement. To me it looked a little
> bit too much but I don't mind.

No need. It just wasn't clear to me that you had U-Boot configured to
pass the rate on the command line.

As I mentioned, I suspect that the serial output doesn't "die" as such,
but rather changes rate. It might be worth clarifying that in the commit
message, but either way the patch itself is fine, and it's no big deal.

Thanks,
Mark.

[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Mark Rutland]

On Wed, Aug 17, 2016 at 12:28:48PM +0200, Krzysztof Kozlowski wrote:
> On 08/17/2016 12:25 PM, Mark Rutland wrote:
> > On Wed, Aug 17, 2016 at 09:34:58AM +0200, Krzysztof Kozlowski wrote:
> >> The "linux,stdout-path" is deprecated.
> >>
> >> Add serial options so the console can be properly configured when
> >> bootloader does not pass "console" parameter to command line.  Without
> >> options and lack of "console", the serial output dies during boot (just
> >> after probing sound).
> > 
> > I'm confused. Is this just a cleanup (given "linux,stdout-path" is
> > deprecated but still supported), or a bug fix?
> 
> There is no bug, so rather this is cleanup and improvement in one.
> Usually we pass full console=ttySAC2,115200n8 from UBoot to command
> line. The usage of serial options allows skipping that.
> 
> I can split the cleanup part from improvement. To me it looked a little
> bit too much but I don't mind.

No need. It just wasn't clear to me that you had U-Boot configured to
pass the rate on the command line.

As I mentioned, I suspect that the serial output doesn't "die" as such,
but rather changes rate. It might be worth clarifying that in the commit
message, but either way the patch itself is fine, and it's no big deal.

Thanks,
Mark.

Re: [PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Javier Martinez Canillas]

Hello Krzysztof,

On 08/17/2016 03:34 AM, Krzysztof Kozlowski wrote:
> The "linux,stdout-path" is deprecated.
> 
> Add serial options so the console can be properly configured when
> bootloader does not pass "console" parameter to command line.  Without
> options and lack of "console", the serial output dies during boot (just
> after probing sound).
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---

The patch looks good to me.

Reviewed-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Javier Martinez Canillas]

Hello Krzysztof,

On 08/17/2016 03:34 AM, Krzysztof Kozlowski wrote:
> The "linux,stdout-path" is deprecated.
> 
> Add serial options so the console can be properly configured when
> bootloader does not pass "console" parameter to command line.  Without
> options and lack of "console", the serial output dies during boot (just
> after probing sound).
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---

The patch looks good to me.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH] ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4

[Javier Martinez Canillas]

Hello Krzysztof,

On 08/17/2016 03:34 AM, Krzysztof Kozlowski wrote:
> The "linux,stdout-path" is deprecated.
> 
> Add serial options so the console can be properly configured when
> bootloader does not pass "console" parameter to command line.  Without
> options and lack of "console", the serial output dies during boot (just
> after probing sound).
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---

The patch looks good to me.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America