[PATCH v2 0/3] mini-os: some cleanups

[PATCH v2 0/3] mini-os: some cleanups

[Juergen Gross]

Do some cleanups in Mini-OS.

V2: modified patch 2 as suggested by Andrew Cooper

Juergen Gross (3):
  mini-os: cleanup x86_32.S
  mini-os: cleanup x86_64.S
  mini-os: remove unused functions from sched.c

 arch/x86/x86_32.S |  7 +------
 arch/x86/x86_64.S | 43 +++++++++++++++----------------------------
 sched.c           | 48 ------------------------------------------------
 3 files changed, 16 insertions(+), 82 deletions(-)

-- 
2.6.6


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v2 1/3] mini-os: cleanup x86_32.S

[Juergen Gross]

arch/x86/x86_32.S has some superfluous instructions. Remove them.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
---
 arch/x86/x86_32.S | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/x86/x86_32.S b/arch/x86/x86_32.S
index f70fc65..3de0027 100644
--- a/arch/x86/x86_32.S
+++ b/arch/x86/x86_32.S
@@ -111,7 +111,6 @@ do_exception:
     jmp ret_from_exception
     
 ret_from_exception:
-    movb CS(%esp),%cl
     addl $8,%esp
     RESTORE_ALL
 
@@ -140,11 +139,7 @@ ENTRY(hypervisor_callback)
         call do_hypervisor_callback
         add  $4,%esp
         movl HYPERVISOR_shared_info,%esi
-        xorl %eax,%eax
-        movb CS(%esp),%cl
-    	test $2,%cl          # slow return to ring 2 or 3
-        jne  safesti
-safesti:movb $0,1(%esi)     # reenable event callbacks
+        movb $0,1(%esi)     # reenable event callbacks
 scrit:  /**** START OF CRITICAL REGION ****/
         testb $0xFF,(%esi)
         jnz  14f              # process more events if necessary...
-- 
2.6.6


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v2 2/3] mini-os: cleanup x86_64.S

[Juergen Gross]

arch/x86/x86_64.S contains some unnecessary macros. Remove them.

Add a SAVE_PARAVIRT macro for saving %rcx and %r11 on the stack in
case of CONFIG_PARAVIRT defined.

Remove the parameter from HYPERVISOR_IRET macro as it is used with
0 only.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2: modify SAVE_PARAVIRT as suggested by Andrew Cooper
---
 arch/x86/x86_64.S | 43 +++++++++++++++----------------------------
 1 file changed, 15 insertions(+), 28 deletions(-)

diff --git a/arch/x86/x86_64.S b/arch/x86/x86_64.S
index 2046187..7529c02 100644
--- a/arch/x86/x86_64.S
+++ b/arch/x86/x86_64.S
@@ -45,21 +45,10 @@ hypercall_page:
 
 
 #define XEN_GET_VCPU_INFO(reg)	movq HYPERVISOR_shared_info,reg
-#define XEN_PUT_VCPU_INFO(reg)
-#define XEN_PUT_VCPU_INFO_fixup
 #define XEN_LOCKED_BLOCK_EVENTS(reg)	movb $1,evtchn_upcall_mask(reg)
 #define XEN_LOCKED_UNBLOCK_EVENTS(reg)	movb $0,evtchn_upcall_mask(reg)
 #define XEN_TEST_PENDING(reg)	testb $0xFF,evtchn_upcall_pending(reg)
 
-#define XEN_BLOCK_EVENTS(reg)	XEN_GET_VCPU_INFO(reg)			; \
-                    			XEN_LOCKED_BLOCK_EVENTS(reg)	; \
-    				            XEN_PUT_VCPU_INFO(reg)
-
-#define XEN_UNBLOCK_EVENTS(reg)	XEN_GET_VCPU_INFO(reg)			; \
-                				XEN_LOCKED_UNBLOCK_EVENTS(reg)	; \
-    			            	XEN_PUT_VCPU_INFO(reg)
-
-
 /* Offsets into shared_info_t. */                
 #define evtchn_upcall_pending		/* 0 */
 #define evtchn_upcall_mask		1
@@ -77,12 +66,15 @@ KERNEL_CS_MASK = 0xfc
 
 
 /* Macros */
+.macro SAVE_PARAVIRT
+#ifdef CONFIG_PARAVIRT
+	pop %rcx
+	pop %r11 /* rsp points to the error code */
+#endif
+.endm
+
 .macro zeroentry sym
-#ifdef CONFIG_PARAVIRT
-	movq (%rsp),%rcx
-	movq 8(%rsp),%r11
-	addq $0x10,%rsp /* skip rcx and r11 */
-#endif
+	SAVE_PARAVIRT
 	pushq $0	/* push error code/oldrax */
 	pushq %rax	/* push real oldrax to the rdi slot */
 	leaq  \sym(%rip),%rax
@@ -90,11 +82,7 @@ KERNEL_CS_MASK = 0xfc
 .endm
 
 .macro errorentry sym
-#ifdef CONFIG_PARAVIRT
-	movq (%rsp),%rcx
-	movq 8(%rsp),%r11
-	addq $0x10,%rsp /* rsp points to the error code */
-#endif
+	SAVE_PARAVIRT
 	pushq %rax
 	leaq  \sym(%rip),%rax
 	jmp error_entry
@@ -141,7 +129,7 @@ KERNEL_CS_MASK = 0xfc
 	movq %rdi, RDI(%rsp)	/* put rdi into the slot */
 .endm
 
-.macro HYPERVISOR_IRET flag
+.macro HYPERVISOR_IRET
 #ifdef CONFIG_PARAVIRT
 	testl $NMI_MASK,2*8(%rsp)
 	jnz   2f
@@ -155,7 +143,7 @@ KERNEL_CS_MASK = 0xfc
 #ifdef CONFIG_PARAVIRT
 2:	/* Slow iret via hypervisor. */
 	andl  $~NMI_MASK, 16(%rsp)
-	pushq $\flag
+	pushq $0
 	jmp  hypercall_page + (__HYPERVISOR_iret * 32)
 #endif
 .endm
@@ -207,17 +195,16 @@ error_exit:
 	andb evtchn_upcall_mask(%rsi),%al
 	andb $1,%al			# EAX[0] == IRET_RFLAGS.IF & event_mask
 	jnz restore_all_enable_events	#        != 0 => enable event delivery
-	XEN_PUT_VCPU_INFO(%rsi)
 
 	RESTORE_ALL
-	HYPERVISOR_IRET 0
+	HYPERVISOR_IRET
 
 restore_all_enable_events:
 	RESTORE_ALL
 	pushq %rax                      # save rax for it will be clobbered later
 	RSP_OFFSET=8                    # record the stack frame layout changes
 	XEN_GET_VCPU_INFO(%rax)         # safe to use rax since it is saved
-	XEN_UNBLOCK_EVENTS(%rax)
+	XEN_LOCKED_UNBLOCK_EVENTS(%rax)
 
 scrit:	/**** START OF CRITICAL REGION ****/
 	XEN_TEST_PENDING(%rax)
@@ -229,7 +216,7 @@ scrit:	/**** START OF CRITICAL REGION ****/
 restore_end:
 	jnz hypervisor_prologue         # safe to jump out of critical region
 	                                # because events are masked if ZF = 0
-	HYPERVISOR_IRET 0
+	HYPERVISOR_IRET
 ecrit:  /**** END OF CRITICAL REGION ****/
 
 # Set up the stack as Xen does before calling event callback
@@ -278,7 +265,7 @@ critical_region_fixup:
 #else
 error_exit:
 	RESTORE_ALL
-	HYPERVISOR_IRET 0
+	HYPERVISOR_IRET
 
 /*
  * Xen event (virtual interrupt) entry point.
-- 
2.6.6


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v2 2/3] mini-os: cleanup x86_64.S

[Wei Liu]

On Mon, Aug 29, 2016 at 08:17:21AM +0200, Juergen Gross wrote:
> arch/x86/x86_64.S contains some unnecessary macros. Remove them.
> 
> Add a SAVE_PARAVIRT macro for saving %rcx and %r11 on the stack in
> case of CONFIG_PARAVIRT defined.
> 
> Remove the parameter from HYPERVISOR_IRET macro as it is used with
> 0 only.
> 
> Signed-off-by: Juergen Gross <jgross@suse.com>

Reviewed-by: Wei Liu <wei.liu2@citrix.com>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v2 2/3] mini-os: cleanup x86_64.S

[Samuel Thibault]

Wei Liu, on Mon 29 Aug 2016 09:51:52 +0100, wrote:
> On Mon, Aug 29, 2016 at 08:17:21AM +0200, Juergen Gross wrote:
> > arch/x86/x86_64.S contains some unnecessary macros. Remove them.
> > 
> > Add a SAVE_PARAVIRT macro for saving %rcx and %r11 on the stack in
> > case of CONFIG_PARAVIRT defined.
> > 
> > Remove the parameter from HYPERVISOR_IRET macro as it is used with
> > 0 only.
> > 
> > Signed-off-by: Juergen Gross <jgross@suse.com>
> 
> Reviewed-by: Wei Liu <wei.liu2@citrix.com>

Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

[PATCH v2 3/3] mini-os: remove unused functions from sched.c

[Juergen Gross]

sched.c contains some functions nobody is using. Remove them.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
---
 sched.c | 48 ------------------------------------------------
 1 file changed, 48 deletions(-)

diff --git a/sched.c b/sched.c
index 1e843d9..6f89ea4 100644
--- a/sched.c
+++ b/sched.c
@@ -63,16 +63,6 @@ static int threads_started;
 
 struct thread *main_thread;
 
-void inline print_runqueue(void)
-{
-    struct thread *th;
-    MINIOS_TAILQ_FOREACH(th, &thread_list, thread_list)
-    {
-        printk("   Thread \"%s\", runnable=%d\n", th->name, is_runnable(th));
-    }
-    printk("\n");
-}
-
 void schedule(void)
 {
     struct thread *prev, *next, *thread, *tmp;
@@ -245,44 +235,6 @@ void idle_thread_fn(void *unused)
     }
 }
 
-DECLARE_MUTEX(mutex);
-
-void th_f1(void *data)
-{
-    struct timeval tv1, tv2;
-
-    for(;;)
-    {
-        down(&mutex);
-        printk("Thread \"%s\" got semaphore, runnable %d\n", current->name, is_runnable(current));
-        schedule();
-        printk("Thread \"%s\" releases the semaphore\n", current->name);
-        up(&mutex);
-        
-        
-        gettimeofday(&tv1, NULL);
-        for(;;)
-        {
-            gettimeofday(&tv2, NULL);
-            if(tv2.tv_sec - tv1.tv_sec > 2) break;
-        }
-                
-        
-        schedule(); 
-    }
-}
-
-void th_f2(void *data)
-{
-    for(;;)
-    {
-        printk("Thread OTHER executing, data 0x%p\n", data);
-        schedule();
-    }
-}
-
-
-
 void init_sched(void)
 {
     printk("Initialising scheduler\n");
-- 
2.6.6


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

Re: [PATCH v2 0/3] mini-os: some cleanups

[Wei Liu]

On Mon, Aug 29, 2016 at 08:17:19AM +0200, Juergen Gross wrote:
> Do some cleanups in Mini-OS.
> 
> V2: modified patch 2 as suggested by Andrew Cooper
> 
> Juergen Gross (3):
>   mini-os: cleanup x86_32.S
>   mini-os: cleanup x86_64.S
>   mini-os: remove unused functions from sched.c
> 
>  arch/x86/x86_32.S |  7 +------
>  arch/x86/x86_64.S | 43 +++++++++++++++----------------------------
>  sched.c           | 48 ------------------------------------------------
>  3 files changed, 16 insertions(+), 82 deletions(-)
> 

Pushed.

> -- 
> 2.6.6
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel