All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Enric Balletbo Serra" <eballetbo@gmail.com>,
	"Javier Martinez Canillas" <javier@osg.samsung.com>,
	"Pau Pajuel" <ppajuel@gmail.com>,
	"Agustí Fontquerni i Gorchs" <afontquerni@iseebcn.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: Add power button support for igepv5
Date: Fri,  9 Sep 2016 14:07:29 -0700	[thread overview]
Message-ID: <20160909210729.20184-1-tony@atomide.com> (raw)

Add power button support for igepv5.

Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5-igep0050.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "omap5-board-common.dtsi"
 
 / {
@@ -17,6 +18,18 @@
 		device_type = "memory";
 		reg = <0x80000000 0x7f000000>; /* 2032 MB */
 	};
+
+	gpio_keys {
+                compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &hdmi {
@@ -58,6 +71,12 @@
 			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	power_button_pin: pinctrl_power_button_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
+		>;
+	};
 };
 
 &tpd12s015 {
-- 
2.9.3

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: Add power button support for igepv5
Date: Fri,  9 Sep 2016 14:07:29 -0700	[thread overview]
Message-ID: <20160909210729.20184-1-tony@atomide.com> (raw)

Add power button support for igepv5.

Cc: Agust? Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5-igep0050.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "omap5-board-common.dtsi"
 
 / {
@@ -17,6 +18,18 @@
 		device_type = "memory";
 		reg = <0x80000000 0x7f000000>; /* 2032 MB */
 	};
+
+	gpio_keys {
+                compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &hdmi {
@@ -58,6 +71,12 @@
 			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	power_button_pin: pinctrl_power_button_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
+		>;
+	};
 };
 
 &tpd12s015 {
-- 
2.9.3

             reply	other threads:[~2016-09-09 21:07 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-09 21:07 Tony Lindgren [this message]
2016-09-09 21:07 ` [PATCH] ARM: dts: Add power button support for igepv5 Tony Lindgren
2016-09-14  1:26 ` Javier Martinez Canillas
2016-09-14  1:26   ` Javier Martinez Canillas
2016-09-19  8:13   ` Pau Pajuel
2016-09-19  8:13     ` Pau Pajuel
2016-09-19 23:08     ` Tony Lindgren
2016-09-19 23:08       ` Tony Lindgren
2016-09-20 12:15       ` Ladislav Michl
2016-09-20 12:15         ` Ladislav Michl
2016-09-20 18:39         ` Tony Lindgren
2016-09-20 18:39           ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160909210729.20184-1-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=afontquerni@iseebcn.com \
    --cc=eballetbo@gmail.com \
    --cc=javier@osg.samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=ppajuel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.