From: Bjorn Helgaas <helgaas@kernel.org>
To: Po Liu <po.liu@nxp.com>
Cc: linux-pci@vger.kernel.org, soren.brinkmann@xilinx.com,
Roy Zang <roy.zang@nxp.com>, Arnd Bergmann <arnd@arndb.de>,
jingoohan1@gmail.com, pratyush.anand@gmail.com,
Stuart Yoder <stuart.yoder@nxp.com>,
Yang-Leo Li <leoyang.li@nxp.com>,
linux-arm-kernel@lists.infradead.org,
Bjorn Helgaas <bhelgaas@google.com>,
lftan@altera.com, michal.simek@xilinx.com,
Mingkai Hu <mingkai.hu@nxp.com>
Subject: Re: [PATCH v2] arm64:pci: fix the IOV device access config space valid condition
Date: Mon, 12 Sep 2016 16:44:08 -0500 [thread overview]
Message-ID: <20160912214408.GC23532@localhost> (raw)
In-Reply-To: <1472455618-17892-1-git-send-email-po.liu@nxp.com>
On Mon, Aug 29, 2016 at 03:26:58PM +0800, Po Liu wrote:
> When echo a number to /sys/bus/pci/devices/xxx/sriov_numvfs to enable the
> VF devices. A crash log occurred. This found to be access the IOV devices
> config space failure issue.
>
> The read/write config space from host would judge the pcie device plugin
> or not by(Designware platform as example):
>
> if (bus->primary == pp->root_bus_nr && dev > 0)
> return 0;
>
> Although all PCIe devices for dev(coming from the device and function
> number) is zero. But the dev is not zero for VF devices. So remove the
> condition.
>
> These PCI hosts were changed: designware, altera, xilinx.
>
> Signed-off-by: Po Liu <po.liu@nxp.com>
Applied to pci/virtualization for v4.9, thanks!
I split it into three patches for backporting and reversion purposes.
> ---
> changes for v2:
> - add pci hosts: altera, xilinx;
>
> drivers/pci/host/pcie-altera.c | 7 -------
> drivers/pci/host/pcie-designware.c | 7 -------
> drivers/pci/host/pcie-xilinx.c | 7 -------
> 3 files changed, 21 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c
> index 2b78376..edbe0a7 100644
> --- a/drivers/pci/host/pcie-altera.c
> +++ b/drivers/pci/host/pcie-altera.c
> @@ -171,13 +171,6 @@ static bool altera_pcie_valid_config(struct altera_pcie *pcie,
> if (bus->number == pcie->root_bus_nr && dev > 0)
> return false;
>
> - /*
> - * Do not read more than one device on the bus directly attached
> - * to root port, root port can only attach to one downstream port.
> - */
> - if (bus->primary == pcie->root_bus_nr && dev > 0)
> - return false;
> -
> return true;
> }
>
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 12afce1..dd20eb2 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -670,13 +670,6 @@ static int dw_pcie_valid_config(struct pcie_port *pp,
> if (bus->number == pp->root_bus_nr && dev > 0)
> return 0;
>
> - /*
> - * do not read more than one device on the bus directly attached
> - * to RC's (Virtual Bridge's) DS side.
> - */
> - if (bus->primary == pp->root_bus_nr && dev > 0)
> - return 0;
> -
> return 1;
> }
>
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index a30e016..75c89db 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -168,13 +168,6 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
> if (bus->number == port->root_busno && devfn > 0)
> return false;
>
> - /*
> - * Do not read more than one device on the bus directly attached
> - * to RC.
> - */
> - if (bus->primary == port->root_busno && devfn > 0)
> - return false;
> -
> return true;
> }
>
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: helgaas@kernel.org (Bjorn Helgaas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64:pci: fix the IOV device access config space valid condition
Date: Mon, 12 Sep 2016 16:44:08 -0500 [thread overview]
Message-ID: <20160912214408.GC23532@localhost> (raw)
In-Reply-To: <1472455618-17892-1-git-send-email-po.liu@nxp.com>
On Mon, Aug 29, 2016 at 03:26:58PM +0800, Po Liu wrote:
> When echo a number to /sys/bus/pci/devices/xxx/sriov_numvfs to enable the
> VF devices. A crash log occurred. This found to be access the IOV devices
> config space failure issue.
>
> The read/write config space from host would judge the pcie device plugin
> or not by(Designware platform as example):
>
> if (bus->primary == pp->root_bus_nr && dev > 0)
> return 0;
>
> Although all PCIe devices for dev(coming from the device and function
> number) is zero. But the dev is not zero for VF devices. So remove the
> condition.
>
> These PCI hosts were changed: designware, altera, xilinx.
>
> Signed-off-by: Po Liu <po.liu@nxp.com>
Applied to pci/virtualization for v4.9, thanks!
I split it into three patches for backporting and reversion purposes.
> ---
> changes for v2:
> - add pci hosts: altera, xilinx;
>
> drivers/pci/host/pcie-altera.c | 7 -------
> drivers/pci/host/pcie-designware.c | 7 -------
> drivers/pci/host/pcie-xilinx.c | 7 -------
> 3 files changed, 21 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c
> index 2b78376..edbe0a7 100644
> --- a/drivers/pci/host/pcie-altera.c
> +++ b/drivers/pci/host/pcie-altera.c
> @@ -171,13 +171,6 @@ static bool altera_pcie_valid_config(struct altera_pcie *pcie,
> if (bus->number == pcie->root_bus_nr && dev > 0)
> return false;
>
> - /*
> - * Do not read more than one device on the bus directly attached
> - * to root port, root port can only attach to one downstream port.
> - */
> - if (bus->primary == pcie->root_bus_nr && dev > 0)
> - return false;
> -
> return true;
> }
>
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 12afce1..dd20eb2 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -670,13 +670,6 @@ static int dw_pcie_valid_config(struct pcie_port *pp,
> if (bus->number == pp->root_bus_nr && dev > 0)
> return 0;
>
> - /*
> - * do not read more than one device on the bus directly attached
> - * to RC's (Virtual Bridge's) DS side.
> - */
> - if (bus->primary == pp->root_bus_nr && dev > 0)
> - return 0;
> -
> return 1;
> }
>
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index a30e016..75c89db 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -168,13 +168,6 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
> if (bus->number == port->root_busno && devfn > 0)
> return false;
>
> - /*
> - * Do not read more than one device on the bus directly attached
> - * to RC.
> - */
> - if (bus->primary == port->root_busno && devfn > 0)
> - return false;
> -
> return true;
> }
>
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2016-09-12 21:44 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-23 6:01 [PATCH v1] arm64:pci: fix the IOV device enabled crash issue in designware Po Liu
2016-08-23 6:01 ` Po Liu
2016-08-24 20:50 ` Bjorn Helgaas
2016-08-24 20:50 ` Bjorn Helgaas
2016-08-25 4:53 ` Po Liu
2016-08-25 4:53 ` Po Liu
2016-08-25 18:09 ` Bjorn Helgaas
2016-08-25 18:09 ` Bjorn Helgaas
2016-08-26 8:17 ` Po Liu
2016-08-26 8:17 ` Po Liu
2016-08-29 7:26 ` [PATCH v2] arm64:pci: fix the IOV device access config space valid condition Po Liu
2016-08-29 7:26 ` Po Liu
2016-08-30 15:43 ` Jingoo Han
2016-08-30 15:43 ` Jingoo Han
2016-08-30 15:54 ` Roy Zang
2016-08-30 15:54 ` Roy Zang
2016-08-30 16:32 ` Roy Zang
2016-08-30 16:32 ` Roy Zang
2016-08-30 18:15 ` Jingoo Han
2016-08-30 18:15 ` Jingoo Han
2016-08-30 18:25 ` Roy Zang
2016-08-30 18:25 ` Roy Zang
2016-09-01 0:58 ` Ley Foon Tan
2016-09-01 0:58 ` Ley Foon Tan
2016-09-12 21:44 ` Bjorn Helgaas [this message]
2016-09-12 21:44 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160912214408.GC23532@localhost \
--to=helgaas@kernel.org \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=leoyang.li@nxp.com \
--cc=lftan@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=mingkai.hu@nxp.com \
--cc=po.liu@nxp.com \
--cc=pratyush.anand@gmail.com \
--cc=roy.zang@nxp.com \
--cc=soren.brinkmann@xilinx.com \
--cc=stuart.yoder@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.