[PATCH 1/2] dt-bindings: add the regulator optional properties

[PATCH 1/2] dt-bindings: add the regulator optional properties

[Caesar Wang]

Add the regulator properties that will be used to power on/off
the regulator.

Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Jiri Kosina <jikos-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---

 Documentation/devicetree/bindings/input/hid-over-i2c.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 488edcb..e648e44 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -17,6 +17,9 @@ Required properties:
 - interrupt-parent: the phandle for the interrupt controller
 - interrupts: interrupt line
 
+Optional properties:
+- power-supply: phandle of the regulator that provides the supply voltage.
+
 Example:
 
 	i2c-hid-dev@2c {
-- 
1.9.1

[PATCH 1/2] dt-bindings: add the regulator optional properties

[Caesar Wang]

Add the regulator properties that will be used to power on/off
the regulator.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: linux-input@vger.kernel.org
---

 Documentation/devicetree/bindings/input/hid-over-i2c.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index 488edcb..e648e44 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -17,6 +17,9 @@ Required properties:
 - interrupt-parent: the phandle for the interrupt controller
 - interrupts: interrupt line
 
+Optional properties:
+- power-supply: phandle of the regulator that provides the supply voltage.
+
 Example:
 
 	i2c-hid-dev@2c {
-- 
1.9.1

[PATCH 2/2] HID: i2c-hid: support the regulator

[Caesar Wang]

From: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

In order to allow supporting the HID based devices that need power on/off
the regulator. We try to get a power-supply property from the
device tree.

Signed-off-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: Jiri Kosina <jikos-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org

---

 drivers/hid/i2c-hid/i2c-hid.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index b3ec4f2..07cc7aa 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -38,6 +38,7 @@
 #include <linux/acpi.h>
 #include <linux/of.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/i2c/i2c-hid.h>
 
@@ -152,6 +153,7 @@ struct i2c_hid {
 
 	bool			irq_wake_enabled;
 	struct mutex		reset_lock;
+	struct regulator	*supply;
 };
 
 static int __i2c_hid_command(struct i2c_client *client,
@@ -968,6 +970,21 @@ static int i2c_hid_probe(struct i2c_client *client,
 	if (!ihid)
 		return -ENOMEM;
 
+	ihid->supply = devm_regulator_get(&client->dev, "power");
+	if (IS_ERR(ihid->supply)) {
+		ret = PTR_ERR(ihid->supply);
+		dev_err(&client->dev, "Failed to get power regulator: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = regulator_enable(ihid->supply);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to enable power regulator: %d\n",
+			ret);
+		return ret;
+	}
+
 	if (client->dev.of_node) {
 		ret = i2c_hid_of_probe(client, &ihid->pdata);
 		if (ret)
@@ -1100,6 +1117,8 @@ static int i2c_hid_remove(struct i2c_client *client)
 	if (ihid->desc)
 		gpiod_put(ihid->desc);
 
+	regulator_disable(ihid->supply);
+
 	kfree(ihid);
 
 	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev));
@@ -1152,6 +1171,11 @@ static int i2c_hid_suspend(struct device *dev)
 		else
 			hid_warn(hid, "Failed to enable irq wake: %d\n",
 				wake_status);
+	} else {
+		ret = regulator_disable(ihid->supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to disable power supply: %d\n",
+				 ret);
 	}
 
 	return 0;
@@ -1165,7 +1189,12 @@ static int i2c_hid_resume(struct device *dev)
 	struct hid_device *hid = ihid->hid;
 	int wake_status;
 
-	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
+	if (!device_may_wakeup(&client->dev)) {
+		ret = regulator_enable(ihid->supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to enable power supply: %d\n",
+				 ret);
+	} else if (ihid->irq_wake_enabled) {
 		wake_status = disable_irq_wake(ihid->irq);
 		if (!wake_status)
 			ihid->irq_wake_enabled = false;
-- 
1.9.1

[PATCH 2/2] HID: i2c-hid: support the regulator

[Caesar Wang]

From: Brian Norris <briannorris@chromium.org>

In order to allow supporting the HID based devices that need power on/off
the regulator. We try to get a power-supply property from the
device tree.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: linux-input@vger.kernel.org

---

 drivers/hid/i2c-hid/i2c-hid.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index b3ec4f2..07cc7aa 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -38,6 +38,7 @@
 #include <linux/acpi.h>
 #include <linux/of.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/i2c/i2c-hid.h>
 
@@ -152,6 +153,7 @@ struct i2c_hid {
 
 	bool			irq_wake_enabled;
 	struct mutex		reset_lock;
+	struct regulator	*supply;
 };
 
 static int __i2c_hid_command(struct i2c_client *client,
@@ -968,6 +970,21 @@ static int i2c_hid_probe(struct i2c_client *client,
 	if (!ihid)
 		return -ENOMEM;
 
+	ihid->supply = devm_regulator_get(&client->dev, "power");
+	if (IS_ERR(ihid->supply)) {
+		ret = PTR_ERR(ihid->supply);
+		dev_err(&client->dev, "Failed to get power regulator: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = regulator_enable(ihid->supply);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to enable power regulator: %d\n",
+			ret);
+		return ret;
+	}
+
 	if (client->dev.of_node) {
 		ret = i2c_hid_of_probe(client, &ihid->pdata);
 		if (ret)
@@ -1100,6 +1117,8 @@ static int i2c_hid_remove(struct i2c_client *client)
 	if (ihid->desc)
 		gpiod_put(ihid->desc);
 
+	regulator_disable(ihid->supply);
+
 	kfree(ihid);
 
 	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev));
@@ -1152,6 +1171,11 @@ static int i2c_hid_suspend(struct device *dev)
 		else
 			hid_warn(hid, "Failed to enable irq wake: %d\n",
 				wake_status);
+	} else {
+		ret = regulator_disable(ihid->supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to disable power supply: %d\n",
+				 ret);
 	}
 
 	return 0;
@@ -1165,7 +1189,12 @@ static int i2c_hid_resume(struct device *dev)
 	struct hid_device *hid = ihid->hid;
 	int wake_status;
 
-	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
+	if (!device_may_wakeup(&client->dev)) {
+		ret = regulator_enable(ihid->supply);
+		if (ret < 0)
+			hid_warn(hid, "Failed to enable power supply: %d\n",
+				 ret);
+	} else if (ihid->irq_wake_enabled) {
 		wake_status = disable_irq_wake(ihid->irq);
 		if (!wake_status)
 			ihid->irq_wake_enabled = false;
-- 
1.9.1

Re: [PATCH 2/2] HID: i2c-hid: support the regulator

[Benjamin Tissoires]

On Sep 05 2016 or thereabouts, Caesar Wang wrote:
> From: Brian Norris <briannorris@chromium.org>
> 
> In order to allow supporting the HID based devices that need power on/off
> the regulator. We try to get a power-supply property from the
> device tree.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> Cc: Jiri Kosina <jikos@kernel.org>
> Cc: linux-input@vger.kernel.org
> 
> ---
> 
>  drivers/hid/i2c-hid/i2c-hid.c | 31 ++++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index b3ec4f2..07cc7aa 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -38,6 +38,7 @@
>  #include <linux/acpi.h>
>  #include <linux/of.h>
>  #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include <linux/i2c/i2c-hid.h>
>  
> @@ -152,6 +153,7 @@ struct i2c_hid {
>  
>  	bool			irq_wake_enabled;
>  	struct mutex		reset_lock;
> +	struct regulator	*supply;
>  };
>  
>  static int __i2c_hid_command(struct i2c_client *client,
> @@ -968,6 +970,21 @@ static int i2c_hid_probe(struct i2c_client *client,
>  	if (!ihid)
>  		return -ENOMEM;
>  
> +	ihid->supply = devm_regulator_get(&client->dev, "power");
> +	if (IS_ERR(ihid->supply)) {

I am not familiar with regulators, but what if (like 99% of the
available i2c-hid devices) there is no regulator attached to the device?

Will the pointer be null? Will there be a dummy regulator?

It seems at first sight that you are adding a requirement on the devices
which is not part of the spec, and which will break every existing
systems but yours. Again, I might be wrong, so please provide more
information.

Cheers,
Benjamin

> +		ret = PTR_ERR(ihid->supply);
> +		dev_err(&client->dev, "Failed to get power regulator: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	ret = regulator_enable(ihid->supply);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to enable power regulator: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
>  	if (client->dev.of_node) {
>  		ret = i2c_hid_of_probe(client, &ihid->pdata);
>  		if (ret)
> @@ -1100,6 +1117,8 @@ static int i2c_hid_remove(struct i2c_client *client)
>  	if (ihid->desc)
>  		gpiod_put(ihid->desc);
>  
> +	regulator_disable(ihid->supply);
> +
>  	kfree(ihid);
>  
>  	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev));
> @@ -1152,6 +1171,11 @@ static int i2c_hid_suspend(struct device *dev)
>  		else
>  			hid_warn(hid, "Failed to enable irq wake: %d\n",
>  				wake_status);
> +	} else {
> +		ret = regulator_disable(ihid->supply);
> +		if (ret < 0)
> +			hid_warn(hid, "Failed to disable power supply: %d\n",
> +				 ret);
>  	}
>  
>  	return 0;
> @@ -1165,7 +1189,12 @@ static int i2c_hid_resume(struct device *dev)
>  	struct hid_device *hid = ihid->hid;
>  	int wake_status;
>  
> -	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
> +	if (!device_may_wakeup(&client->dev)) {
> +		ret = regulator_enable(ihid->supply);
> +		if (ret < 0)
> +			hid_warn(hid, "Failed to enable power supply: %d\n",
> +				 ret);
> +	} else if (ihid->irq_wake_enabled) {
>  		wake_status = disable_irq_wake(ihid->irq);
>  		if (!wake_status)
>  			ihid->irq_wake_enabled = false;
> -- 
> 1.9.1
> 

Re: [PATCH 2/2] HID: i2c-hid: support the regulator

[Brian Norris]

Hi Benjamin,

On Wed, Sep 14, 2016 at 09:36:03AM +0200, Benjamin Tissoires wrote:
> On Sep 05 2016 or thereabouts, Caesar Wang wrote:
> > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> > index b3ec4f2..07cc7aa 100644
> > --- a/drivers/hid/i2c-hid/i2c-hid.c
> > +++ b/drivers/hid/i2c-hid/i2c-hid.c
> > @@ -38,6 +38,7 @@
> >  #include <linux/acpi.h>
> >  #include <linux/of.h>
> >  #include <linux/gpio/consumer.h>
> > +#include <linux/regulator/consumer.h>
> >  
> >  #include <linux/i2c/i2c-hid.h>
> >  
> > @@ -152,6 +153,7 @@ struct i2c_hid {
> >  
> >  	bool			irq_wake_enabled;
> >  	struct mutex		reset_lock;
> > +	struct regulator	*supply;
> >  };
> >  
> >  static int __i2c_hid_command(struct i2c_client *client,
> > @@ -968,6 +970,21 @@ static int i2c_hid_probe(struct i2c_client *client,
> >  	if (!ihid)
> >  		return -ENOMEM;
> >  
> > +	ihid->supply = devm_regulator_get(&client->dev, "power");
> > +	if (IS_ERR(ihid->supply)) {
> 
> I am not familiar with regulators, but what if (like 99% of the
> available i2c-hid devices) there is no regulator attached to the device?
> 
> Will the pointer be null? Will there be a dummy regulator?
> 
> It seems at first sight that you are adding a requirement on the devices
> which is not part of the spec, and which will break every existing
> systems but yours. Again, I might be wrong, so please provide more
> information.

The default behavior of regulator_get() is to provide a dummy regulator
if none is found. So the pointer is never NULL, and it won't break
devices without a regulator. If you don't want a dummy regulator you
would use regulator_get_optional() instead, and you would then need to
handle ERR_PTR(-ENODEV) specifically.

Brian

Re: [PATCH 2/2] HID: i2c-hid: support the regulator

[Brian Norris]

Hi Benjamin,

On Wed, Sep 14, 2016 at 09:36:03AM +0200, Benjamin Tissoires wrote:
> On Sep 05 2016 or thereabouts, Caesar Wang wrote:
> > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> > index b3ec4f2..07cc7aa 100644
> > --- a/drivers/hid/i2c-hid/i2c-hid.c
> > +++ b/drivers/hid/i2c-hid/i2c-hid.c
> > @@ -38,6 +38,7 @@
> >  #include <linux/acpi.h>
> >  #include <linux/of.h>
> >  #include <linux/gpio/consumer.h>
> > +#include <linux/regulator/consumer.h>
> >  
> >  #include <linux/i2c/i2c-hid.h>
> >  
> > @@ -152,6 +153,7 @@ struct i2c_hid {
> >  
> >  	bool			irq_wake_enabled;
> >  	struct mutex		reset_lock;
> > +	struct regulator	*supply;
> >  };
> >  
> >  static int __i2c_hid_command(struct i2c_client *client,
> > @@ -968,6 +970,21 @@ static int i2c_hid_probe(struct i2c_client *client,
> >  	if (!ihid)
> >  		return -ENOMEM;
> >  
> > +	ihid->supply = devm_regulator_get(&client->dev, "power");
> > +	if (IS_ERR(ihid->supply)) {
> 
> I am not familiar with regulators, but what if (like 99% of the
> available i2c-hid devices) there is no regulator attached to the device?
> 
> Will the pointer be null? Will there be a dummy regulator?
> 
> It seems at first sight that you are adding a requirement on the devices
> which is not part of the spec, and which will break every existing
> systems but yours. Again, I might be wrong, so please provide more
> information.

The default behavior of regulator_get() is to provide a dummy regulator
if none is found. So the pointer is never NULL, and it won't break
devices without a regulator. If you don't want a dummy regulator you
would use regulator_get_optional() instead, and you would then need to
handle ERR_PTR(-ENODEV) specifically.

Brian

Re: [PATCH 2/2] HID: i2c-hid: support the regulator

[Brian Norris]

On Wed, Sep 14, 2016 at 03:55:05PM +0800, Brian Norris wrote:
> The default behavior of regulator_get() is to provide a dummy regulator
> if none is found. So the pointer is never NULL, and it won't break
> devices without a regulator. If you don't want a dummy regulator you
> would use regulator_get_optional() instead, and you would then need to
> handle ERR_PTR(-ENODEV) specifically.

One caveat to the never-NULL comment above that I just noticed:

If CONFIG_REGULATOR=n, then regulator_get() actually returns NULL (see
include/linux/regulator/consumer.h), but it also specifically has a
comment right next to that NULL return, saying:

        /* Nothing except the stubbed out regulator API should be
         * looking at the value except to check if it is an error
         * value. Drivers are free to handle NULL specifically by
         * skipping all regulator API calls, but they don't have to.
         * Drivers which don't, should make sure they properly handle
         * corner cases of the API, such as regulator_get_voltage()
         * returning 0.
         */

So, we still don't need to handle the NULL case specially.

Brian

Re: [PATCH 2/2] HID: i2c-hid: support the regulator

[Benjamin Tissoires]

On Sep 14 2016 or thereabouts, Brian Norris wrote:
> On Wed, Sep 14, 2016 at 03:55:05PM +0800, Brian Norris wrote:
> > The default behavior of regulator_get() is to provide a dummy regulator
> > if none is found. So the pointer is never NULL, and it won't break
> > devices without a regulator. If you don't want a dummy regulator you
> > would use regulator_get_optional() instead, and you would then need to
> > handle ERR_PTR(-ENODEV) specifically.
> 
> One caveat to the never-NULL comment above that I just noticed:
> 
> If CONFIG_REGULATOR=n, then regulator_get() actually returns NULL (see
> include/linux/regulator/consumer.h), but it also specifically has a
> comment right next to that NULL return, saying:
> 
>         /* Nothing except the stubbed out regulator API should be
>          * looking at the value except to check if it is an error
>          * value. Drivers are free to handle NULL specifically by
>          * skipping all regulator API calls, but they don't have to.
>          * Drivers which don't, should make sure they properly handle
>          * corner cases of the API, such as regulator_get_voltage()
>          * returning 0.
>          */
> 
> So, we still don't need to handle the NULL case specially.

Well, all the other regulator calls are either regulator_enable() or
regulator_disable(), which in this case (CONFIG_REGULATOR=n) are
returning 0.

So I think the whole patch is safe in its current form. Thanks for the
explanations.

Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Cheers,
Benjamin

> 
> Brian

Re: [PATCH 1/2] dt-bindings: add the regulator optional properties

[Rob Herring]

On Mon, Sep 05, 2016 at 06:11:55AM +0800, Caesar Wang wrote:
> Add the regulator properties that will be used to power on/off
> the regulator.
> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Jiri Kosina <jikos@kernel.org>
> Cc: linux-input@vger.kernel.org
> ---
> 
>  Documentation/devicetree/bindings/input/hid-over-i2c.txt | 3 +++
>  1 file changed, 3 insertions(+)

I find this binding a bit questionable. The compatible should describe 
the actual device, not just the protocol it uses.

> diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> index 488edcb..e648e44 100644
> --- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
> @@ -17,6 +17,9 @@ Required properties:
>  - interrupt-parent: the phandle for the interrupt controller
>  - interrupts: interrupt line
>  
> +Optional properties:
> +- power-supply: phandle of the regulator that provides the supply voltage.

This needs to be actual supplies for devices. What if a device has 2 
supplies?

Add a device compatible string and make this property specific to that 
device, then it's fine.

Rob