* [PATCH v2] staging: ks7010: ks_wlan_net: Use netdev_ or pr_info instead of printk
@ 2016-09-23 21:33 Georgiana Rodica Chelu
2016-09-25 10:35 ` Greg KH
0 siblings, 1 reply; 4+ messages in thread
From: Georgiana Rodica Chelu @ 2016-09-23 21:33 UTC (permalink / raw)
To: outreachy-kernel; +Cc: gregkh
The checkpatch.pl script found the following warning:
WARNING: printk() should include KERN_ facility level
After adding the KERN_ facility level to printk(), the script showed
another warning:
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
The warning is similar for KERN_ERR and KERN_DEBUG. In conclusion,
use netdev_info(), netdev_err() or netdev_dbg() when there is
a netdev device and use pr_info() in the remained cases.
Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
---
Changes in v2:
- make the commit message more clear
- replace all the appearances of printk()
drivers/staging/ks7010/ks_wlan_net.c | 92 ++++++++++++++++++------------------
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/ks7010/ks_wlan_net.c b/drivers/staging/ks7010/ks_wlan_net.c
index d13a06b..9ef44cc 100644
--- a/drivers/staging/ks7010/ks_wlan_net.c
+++ b/drivers/staging/ks7010/ks_wlan_net.c
@@ -233,9 +233,9 @@ static int ks_wlan_set_freq(struct net_device *dev,
/* We should do a better check than that,
* based on the card capability !!! */
if ((channel < 1) || (channel > 14)) {
- printk(KERN_DEBUG
- "%s: New channel value of %d is invalid!\n",
- dev->name, fwrq->m);
+ netdev_dbg(dev,
+ "%s: New channel value of %d is invalid!\n",
+ dev->name, fwrq->m);
rc = -EINVAL;
} else {
/* Yes ! We can set it !!! */
@@ -2671,17 +2671,17 @@ static int ks_wlan_set_sleep_mode(struct net_device *dev,
if (*uwrq == SLP_SLEEP) {
priv->sleep_mode = *uwrq;
- printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
+ netdev_info(dev, "SET_SLEEP_MODE %d\n", priv->sleep_mode);
hostif_sme_enqueue(priv, SME_STOP_REQUEST);
hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
} else if (*uwrq == SLP_ACTIVE) {
priv->sleep_mode = *uwrq;
- printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
+ netdev_info(dev, "SET_SLEEP_MODE %d\n", priv->sleep_mode);
hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
} else {
- printk("SET_SLEEP_MODE %d errror\n", *uwrq);
+ netdev_err(dev, "SET_SLEEP_MODE %d errror\n", *uwrq);
return -EINVAL;
}
@@ -2783,7 +2783,7 @@ static int ks_wlan_get_wps_enable(struct net_device *dev,
}
/* for SLEEP MODE */
*uwrq = priv->wps.wps_enabled;
- printk("return=%d\n", *uwrq);
+ netdev_info(dev, "return=%d\n", *uwrq);
return 0;
}
@@ -2978,112 +2978,112 @@ static void print_hif_event(int event)
switch (event) {
case HIF_DATA_REQ:
- printk("HIF_DATA_REQ\n");
+ pr_info("HIF_DATA_REQ\n");
break;
case HIF_DATA_IND:
- printk("HIF_DATA_IND\n");
+ pr_info("HIF_DATA_IND\n");
break;
case HIF_MIB_GET_REQ:
- printk("HIF_MIB_GET_REQ\n");
+ pr_info("HIF_MIB_GET_REQ\n");
break;
case HIF_MIB_GET_CONF:
- printk("HIF_MIB_GET_CONF\n");
+ pr_info("HIF_MIB_GET_CONF\n");
break;
case HIF_MIB_SET_REQ:
- printk("HIF_MIB_SET_REQ\n");
+ pr_info("HIF_MIB_SET_REQ\n");
break;
case HIF_MIB_SET_CONF:
- printk("HIF_MIB_SET_CONF\n");
+ pr_info("HIF_MIB_SET_CONF\n");
break;
case HIF_POWERMGT_REQ:
- printk("HIF_POWERMGT_REQ\n");
+ pr_info("HIF_POWERMGT_REQ\n");
break;
case HIF_POWERMGT_CONF:
- printk("HIF_POWERMGT_CONF\n");
+ pr_info("HIF_POWERMGT_CONF\n");
break;
case HIF_START_REQ:
- printk("HIF_START_REQ\n");
+ pr_info("HIF_START_REQ\n");
break;
case HIF_START_CONF:
- printk("HIF_START_CONF\n");
+ pr_info("HIF_START_CONF\n");
break;
case HIF_CONNECT_IND:
- printk("HIF_CONNECT_IND\n");
+ pr_info("HIF_CONNECT_IND\n");
break;
case HIF_STOP_REQ:
- printk("HIF_STOP_REQ\n");
+ pr_info("HIF_STOP_REQ\n");
break;
case HIF_STOP_CONF:
- printk("HIF_STOP_CONF\n");
+ pr_info("HIF_STOP_CONF\n");
break;
case HIF_PS_ADH_SET_REQ:
- printk("HIF_PS_ADH_SET_REQ\n");
+ pr_info("HIF_PS_ADH_SET_REQ\n");
break;
case HIF_PS_ADH_SET_CONF:
- printk("HIF_PS_ADH_SET_CONF\n");
+ pr_info("HIF_PS_ADH_SET_CONF\n");
break;
case HIF_INFRA_SET_REQ:
- printk("HIF_INFRA_SET_REQ\n");
+ pr_info("HIF_INFRA_SET_REQ\n");
break;
case HIF_INFRA_SET_CONF:
- printk("HIF_INFRA_SET_CONF\n");
+ pr_info("HIF_INFRA_SET_CONF\n");
break;
case HIF_ADH_SET_REQ:
- printk("HIF_ADH_SET_REQ\n");
+ pr_info("HIF_ADH_SET_REQ\n");
break;
case HIF_ADH_SET_CONF:
- printk("HIF_ADH_SET_CONF\n");
+ pr_info("HIF_ADH_SET_CONF\n");
break;
case HIF_AP_SET_REQ:
- printk("HIF_AP_SET_REQ\n");
+ pr_info("HIF_AP_SET_REQ\n");
break;
case HIF_AP_SET_CONF:
- printk("HIF_AP_SET_CONF\n");
+ pr_info("HIF_AP_SET_CONF\n");
break;
case HIF_ASSOC_INFO_IND:
- printk("HIF_ASSOC_INFO_IND\n");
+ pr_info("HIF_ASSOC_INFO_IND\n");
break;
case HIF_MIC_FAILURE_REQ:
- printk("HIF_MIC_FAILURE_REQ\n");
+ pr_info("HIF_MIC_FAILURE_REQ\n");
break;
case HIF_MIC_FAILURE_CONF:
- printk("HIF_MIC_FAILURE_CONF\n");
+ pr_info("HIF_MIC_FAILURE_CONF\n");
break;
case HIF_SCAN_REQ:
- printk("HIF_SCAN_REQ\n");
+ pr_info("HIF_SCAN_REQ\n");
break;
case HIF_SCAN_CONF:
- printk("HIF_SCAN_CONF\n");
+ pr_info("HIF_SCAN_CONF\n");
break;
case HIF_PHY_INFO_REQ:
- printk("HIF_PHY_INFO_REQ\n");
+ pr_info("HIF_PHY_INFO_REQ\n");
break;
case HIF_PHY_INFO_CONF:
- printk("HIF_PHY_INFO_CONF\n");
+ pr_info("HIF_PHY_INFO_CONF\n");
break;
case HIF_SLEEP_REQ:
- printk("HIF_SLEEP_REQ\n");
+ pr_info("HIF_SLEEP_REQ\n");
break;
case HIF_SLEEP_CONF:
- printk("HIF_SLEEP_CONF\n");
+ pr_info("HIF_SLEEP_CONF\n");
break;
case HIF_PHY_INFO_IND:
- printk("HIF_PHY_INFO_IND\n");
+ pr_info("HIF_PHY_INFO_IND\n");
break;
case HIF_SCAN_IND:
- printk("HIF_SCAN_IND\n");
+ pr_info("HIF_SCAN_IND\n");
break;
case HIF_INFRA_SET2_REQ:
- printk("HIF_INFRA_SET2_REQ\n");
+ pr_info("HIF_INFRA_SET2_REQ\n");
break;
case HIF_INFRA_SET2_CONF:
- printk("HIF_INFRA_SET2_CONF\n");
+ pr_info("HIF_INFRA_SET2_CONF\n");
break;
case HIF_ADH_SET2_REQ:
- printk("HIF_ADH_SET2_REQ\n");
+ pr_info("HIF_ADH_SET2_REQ\n");
break;
case HIF_ADH_SET2_CONF:
- printk("HIF_ADH_SET2_CONF\n");
+ pr_info("HIF_ADH_SET2_CONF\n");
}
}
@@ -3330,7 +3330,7 @@ int ks_wlan_set_mac_address(struct net_device *dev, void *addr)
priv->mac_address_valid = 0;
hostif_sme_enqueue(priv, SME_MACADDRESS_SET_REQUEST);
- printk(KERN_INFO
+ netdev_info(dev,
"ks_wlan: MAC ADDRESS = %02x:%02x:%02x:%02x:%02x:%02x\n",
priv->eth_addr[0], priv->eth_addr[1], priv->eth_addr[2],
priv->eth_addr[3], priv->eth_addr[4], priv->eth_addr[5]);
@@ -3362,7 +3362,7 @@ int ks_wlan_start_xmit(struct sk_buff *skb, struct net_device *dev)
DPRINTK(3, "in_interrupt()=%ld\n", in_interrupt());
if (!skb) {
- printk(KERN_ERR "ks_wlan: skb == NULL!!!\n");
+ netdev_err(dev, "ks_wlan: skb == NULL!!!\n");
return 0;
}
if (priv->dev_state < DEVICE_STATE_READY) {
@@ -3428,7 +3428,7 @@ int ks_wlan_open(struct net_device *dev)
priv->cur_rx = 0;
if (!priv->mac_address_valid) {
- printk(KERN_ERR "ks_wlan : %s Not READY !!\n", dev->name);
+ netdev_err(dev, "ks_wlan : %s Not READY !!\n", dev->name);
return -EBUSY;
} else
netif_start_queue(dev);
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] staging: ks7010: ks_wlan_net: Use netdev_ or pr_info instead of printk
2016-09-23 21:33 [PATCH v2] staging: ks7010: ks_wlan_net: Use netdev_ or pr_info instead of printk Georgiana Rodica Chelu
@ 2016-09-25 10:35 ` Greg KH
2016-09-26 8:19 ` Georgiana Chelu
0 siblings, 1 reply; 4+ messages in thread
From: Greg KH @ 2016-09-25 10:35 UTC (permalink / raw)
To: Georgiana Rodica Chelu; +Cc: outreachy-kernel
On Sat, Sep 24, 2016 at 12:33:43AM +0300, Georgiana Rodica Chelu wrote:
> The checkpatch.pl script found the following warning:
>
> WARNING: printk() should include KERN_ facility level
>
> After adding the KERN_ facility level to printk(), the script showed
> another warning:
>
> WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
> dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
>
> The warning is similar for KERN_ERR and KERN_DEBUG. In conclusion,
> use netdev_info(), netdev_err() or netdev_dbg() when there is
> a netdev device and use pr_info() in the remained cases.
>
> Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
> ---
> Changes in v2:
> - make the commit message more clear
> - replace all the appearances of printk()
>
> drivers/staging/ks7010/ks_wlan_net.c | 92 ++++++++++++++++++------------------
> 1 file changed, 46 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/staging/ks7010/ks_wlan_net.c b/drivers/staging/ks7010/ks_wlan_net.c
> index d13a06b..9ef44cc 100644
> --- a/drivers/staging/ks7010/ks_wlan_net.c
> +++ b/drivers/staging/ks7010/ks_wlan_net.c
> @@ -233,9 +233,9 @@ static int ks_wlan_set_freq(struct net_device *dev,
> /* We should do a better check than that,
> * based on the card capability !!! */
> if ((channel < 1) || (channel > 14)) {
> - printk(KERN_DEBUG
> - "%s: New channel value of %d is invalid!\n",
> - dev->name, fwrq->m);
> + netdev_dbg(dev,
> + "%s: New channel value of %d is invalid!\n",
> + dev->name, fwrq->m);
> rc = -EINVAL;
> } else {
> /* Yes ! We can set it !!! */
> @@ -2671,17 +2671,17 @@ static int ks_wlan_set_sleep_mode(struct net_device *dev,
>
> if (*uwrq == SLP_SLEEP) {
> priv->sleep_mode = *uwrq;
> - printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
> + netdev_info(dev, "SET_SLEEP_MODE %d\n", priv->sleep_mode);
>
> hostif_sme_enqueue(priv, SME_STOP_REQUEST);
> hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
>
> } else if (*uwrq == SLP_ACTIVE) {
> priv->sleep_mode = *uwrq;
> - printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
> + netdev_info(dev, "SET_SLEEP_MODE %d\n", priv->sleep_mode);
> hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
> } else {
> - printk("SET_SLEEP_MODE %d errror\n", *uwrq);
> + netdev_err(dev, "SET_SLEEP_MODE %d errror\n", *uwrq);
> return -EINVAL;
> }
>
> @@ -2783,7 +2783,7 @@ static int ks_wlan_get_wps_enable(struct net_device *dev,
> }
> /* for SLEEP MODE */
> *uwrq = priv->wps.wps_enabled;
> - printk("return=%d\n", *uwrq);
> + netdev_info(dev, "return=%d\n", *uwrq);
>
> return 0;
> }
> @@ -2978,112 +2978,112 @@ static void print_hif_event(int event)
>
> switch (event) {
> case HIF_DATA_REQ:
> - printk("HIF_DATA_REQ\n");
> + pr_info("HIF_DATA_REQ\n");
> break;
> case HIF_DATA_IND:
> - printk("HIF_DATA_IND\n");
> + pr_info("HIF_DATA_IND\n");
All of these should have a device structure somewhere, please fix this
function up to have that. Right now I'd just take these changes out of
the patch and submit the rest.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] staging: ks7010: ks_wlan_net: Use netdev_ or pr_info instead of printk
2016-09-25 10:35 ` Greg KH
@ 2016-09-26 8:19 ` Georgiana Chelu
2016-09-26 9:02 ` [Outreachy kernel] " Julia Lawall
0 siblings, 1 reply; 4+ messages in thread
From: Georgiana Chelu @ 2016-09-26 8:19 UTC (permalink / raw)
To: Greg KH; +Cc: outreachy-kernel
[-- Attachment #1: Type: text/plain, Size: 4107 bytes --]
I submitted the third version of the patch. I had to change the title,
so the patch will not appear in this thread.
About the function static void print_hif_event(int event); I have
no clue how to find the device structure. Could you give me some hints?
Thank you,
Georgiana
On 25 September 2016 at 13:35, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Sat, Sep 24, 2016 at 12:33:43AM +0300, Georgiana Rodica Chelu wrote:
> > The checkpatch.pl script found the following warning:
> >
> > WARNING: printk() should include KERN_ facility level
> >
> > After adding the KERN_ facility level to printk(), the script showed
> > another warning:
> >
> > WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
> > dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
> >
> > The warning is similar for KERN_ERR and KERN_DEBUG. In conclusion,
> > use netdev_info(), netdev_err() or netdev_dbg() when there is
> > a netdev device and use pr_info() in the remained cases.
> >
> > Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
> > ---
> > Changes in v2:
> > - make the commit message more clear
> > - replace all the appearances of printk()
> >
> > drivers/staging/ks7010/ks_wlan_net.c | 92
> ++++++++++++++++++------------------
> > 1 file changed, 46 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/staging/ks7010/ks_wlan_net.c
> b/drivers/staging/ks7010/ks_wlan_net.c
> > index d13a06b..9ef44cc 100644
> > --- a/drivers/staging/ks7010/ks_wlan_net.c
> > +++ b/drivers/staging/ks7010/ks_wlan_net.c
> > @@ -233,9 +233,9 @@ static int ks_wlan_set_freq(struct net_device *dev,
> > /* We should do a better check than that,
> > * based on the card capability !!! */
> > if ((channel < 1) || (channel > 14)) {
> > - printk(KERN_DEBUG
> > - "%s: New channel value of %d is invalid!\n",
> > - dev->name, fwrq->m);
> > + netdev_dbg(dev,
> > + "%s: New channel value of %d is
> invalid!\n",
> > + dev->name, fwrq->m);
> > rc = -EINVAL;
> > } else {
> > /* Yes ! We can set it !!! */
> > @@ -2671,17 +2671,17 @@ static int ks_wlan_set_sleep_mode(struct
> net_device *dev,
> >
> > if (*uwrq == SLP_SLEEP) {
> > priv->sleep_mode = *uwrq;
> > - printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
> > + netdev_info(dev, "SET_SLEEP_MODE %d\n", priv->sleep_mode);
> >
> > hostif_sme_enqueue(priv, SME_STOP_REQUEST);
> > hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
> >
> > } else if (*uwrq == SLP_ACTIVE) {
> > priv->sleep_mode = *uwrq;
> > - printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
> > + netdev_info(dev, "SET_SLEEP_MODE %d\n", priv->sleep_mode);
> > hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
> > } else {
> > - printk("SET_SLEEP_MODE %d errror\n", *uwrq);
> > + netdev_err(dev, "SET_SLEEP_MODE %d errror\n", *uwrq);
> > return -EINVAL;
> > }
> >
> > @@ -2783,7 +2783,7 @@ static int ks_wlan_get_wps_enable(struct
> net_device *dev,
> > }
> > /* for SLEEP MODE */
> > *uwrq = priv->wps.wps_enabled;
> > - printk("return=%d\n", *uwrq);
> > + netdev_info(dev, "return=%d\n", *uwrq);
> >
> > return 0;
> > }
> > @@ -2978,112 +2978,112 @@ static void print_hif_event(int event)
> >
> > switch (event) {
> > case HIF_DATA_REQ:
> > - printk("HIF_DATA_REQ\n");
> > + pr_info("HIF_DATA_REQ\n");
> > break;
> > case HIF_DATA_IND:
> > - printk("HIF_DATA_IND\n");
> > + pr_info("HIF_DATA_IND\n");
>
> All of these should have a device structure somewhere, please fix this
> function up to have that. Right now I'd just take these changes out of
> the patch and submit the rest.
>
> thanks,
>
> greg k-h
>
[-- Attachment #2: Type: text/html, Size: 5699 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [Outreachy kernel] Re: [PATCH v2] staging: ks7010: ks_wlan_net: Use netdev_ or pr_info instead of printk
2016-09-26 8:19 ` Georgiana Chelu
@ 2016-09-26 9:02 ` Julia Lawall
0 siblings, 0 replies; 4+ messages in thread
From: Julia Lawall @ 2016-09-26 9:02 UTC (permalink / raw)
To: Georgiana Chelu; +Cc: Greg KH, outreachy-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 5798 bytes --]
On Mon, 26 Sep 2016, Georgiana Chelu wrote:
> I submitted the third version of the patch. I had to change the title,
> so the patch will not appear in this thread.
>
> About the function static void print_hif_event(int event); I have
> no clue how to find the device structure. Could you give me some hints?
Look at the call sites of print_hif_event and see if there is some
argument you could add that would provide the needed information.
julia
>
> Thank you,
> Georgiana
>
> On 25 September 2016 at 13:35, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Sat, Sep 24, 2016 at 12:33:43AM +0300, Georgiana Rodica Chelu
> wrote:
> > The checkpatch.pl script found the following warning:
> >
> > WARNING: printk() should include KERN_ facility level
> >
> > After adding the KERN_ facility level to printk(), the script
> showed
> > another warning:
> >
> > WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev,
> ... then
> > dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
> >
> > The warning is similar for KERN_ERR and KERN_DEBUG. In
> conclusion,
> > use netdev_info(), netdev_err() or netdev_dbg() when there is
> > a netdev device and use pr_info() in the remained cases.
> >
> > Signed-off-by: Georgiana Rodica Chelu
> <georgiana.chelu93@gmail.com>
> > ---
> > Changes in v2:
> > - make the commit message more clear
> > - replace all the appearances of printk()
> >
> > drivers/staging/ks7010/ks_wlan_net.c | 92
> ++++++++++++++++++------------------
> > 1 file changed, 46 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/staging/ks7010/ks_wlan_net.c
> b/drivers/staging/ks7010/ks_wlan_net.c
> > index d13a06b..9ef44cc 100644
> > --- a/drivers/staging/ks7010/ks_wlan_net.c
> > +++ b/drivers/staging/ks7010/ks_wlan_net.c
> > @@ -233,9 +233,9 @@ static int ks_wlan_set_freq(struct
> net_device *dev,
> > /* We should do a better check than that,
> > * based on the card capability !!! */
> > if ((channel < 1) || (channel > 14)) {
> > - printk(KERN_DEBUG
> > - "%s: New channel value of %d is
> invalid!\n",
> > - dev->name, fwrq->m);
> > + netdev_dbg(dev,
> > + "%s: New channel value of %d
> is invalid!\n",
> > + dev->name, fwrq->m);
> > rc = -EINVAL;
> > } else {
> > /* Yes ! We can set it !!! */
> > @@ -2671,17 +2671,17 @@ static int
> ks_wlan_set_sleep_mode(struct net_device *dev,
> >
> > if (*uwrq == SLP_SLEEP) {
> > priv->sleep_mode = *uwrq;
> > - printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
> > + netdev_info(dev, "SET_SLEEP_MODE %d\n",
> priv->sleep_mode);
> >
> > hostif_sme_enqueue(priv, SME_STOP_REQUEST);
> > hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
> >
> > } else if (*uwrq == SLP_ACTIVE) {
> > priv->sleep_mode = *uwrq;
> > - printk("SET_SLEEP_MODE %d\n", priv->sleep_mode);
> > + netdev_info(dev, "SET_SLEEP_MODE %d\n",
> priv->sleep_mode);
> > hostif_sme_enqueue(priv, SME_SLEEP_REQUEST);
> > } else {
> > - printk("SET_SLEEP_MODE %d errror\n", *uwrq);
> > + netdev_err(dev, "SET_SLEEP_MODE %d errror\n",
> *uwrq);
> > return -EINVAL;
> > }
> >
> > @@ -2783,7 +2783,7 @@ static int ks_wlan_get_wps_enable(struct
> net_device *dev,
> > }
> > /* for SLEEP MODE */
> > *uwrq = priv->wps.wps_enabled;
> > - printk("return=%d\n", *uwrq);
> > + netdev_info(dev, "return=%d\n", *uwrq);
> >
> > return 0;
> > }
> > @@ -2978,112 +2978,112 @@ static void print_hif_event(int
> event)
> >
> > switch (event) {
> > case HIF_DATA_REQ:
> > - printk("HIF_DATA_REQ\n");
> > + pr_info("HIF_DATA_REQ\n");
> > break;
> > case HIF_DATA_IND:
> > - printk("HIF_DATA_IND\n");
> > + pr_info("HIF_DATA_IND\n");
>
> All of these should have a device structure somewhere, please fix this
> function up to have that. Right now I'd just take these changes out
> of
> the patch and submit the rest.
>
> thanks,
>
> greg k-h
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visithttps://groups.google.com/d/msgid/outreachy-kernel/CALta04y3Z_12G_7Gcv%3D65
> Z9Qb1Hc8UkJ0B4UMVfjQZz9HuKhxw%40mail.gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-09-26 9:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-23 21:33 [PATCH v2] staging: ks7010: ks_wlan_net: Use netdev_ or pr_info instead of printk Georgiana Rodica Chelu
2016-09-25 10:35 ` Greg KH
2016-09-26 8:19 ` Georgiana Chelu
2016-09-26 9:02 ` [Outreachy kernel] " Julia Lawall
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.