From: Enrico Jorns <ejo@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Enrico Jorns <ejo@pengutronix.de>
Subject: [PATCH 2/5] fs: squashfs: port lz4 compression support from kernel
Date: Tue, 4 Oct 2016 12:10:45 +0200 [thread overview]
Message-ID: <20161004101048.12970-3-ejo@pengutronix.de> (raw)
In-Reply-To: <20161004101048.12970-1-ejo@pengutronix.de>
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
---
fs/squashfs/Kconfig | 13 +++++
fs/squashfs/Makefile | 1 +
fs/squashfs/lz4_wrapper.c | 140 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 154 insertions(+)
create mode 100644 fs/squashfs/lz4_wrapper.c
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index d8ee554..d2de168 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -17,6 +17,19 @@ menuconfig FS_SQUASHFS
embedded systems where low overhead is needed. Further information
and tools are available from http://squashfs.sourceforge.net.
+config SQUASHFS_LZ4
+ bool "Include support for LZ4 compressed file systems"
+ depends on FS_SQUASHFS
+ select LZ4_DECOMPRESS
+ help
+ Saying Y here includes support for reading Squashfs file systems
+ compressed with LZ4 compression. LZ4 compression is mainly
+ aimed at embedded systems with slower CPUs where the overheads
+ of zlib are too high.
+
+ LZ4 is not the standard compression used in Squashfs and so most
+ file systems will be readable without selecting this option.
+
config SQUASHFS_LZO
bool "Include support for LZO compressed file systems"
default y
diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index 447e15e..8590b09 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -12,3 +12,4 @@ obj-y += namei.o
obj-y += super.o
obj-$(CONFIG_SQUASHFS_XZ) += xz_wrapper.o
obj-$(CONFIG_SQUASHFS_LZO) += lzo_wrapper.o
+obj-$(CONFIG_SQUASHFS_LZ4) += lz4_wrapper.o
diff --git a/fs/squashfs/lz4_wrapper.c b/fs/squashfs/lz4_wrapper.c
new file mode 100644
index 0000000..6ca6a32
--- /dev/null
+++ b/fs/squashfs/lz4_wrapper.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (c) 2013, 2014
+ * Phillip Lougher <phillip@squashfs.org.uk>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include <types.h>
+#include <linux/mutex.h>
+#include <linux/lz4.h>
+
+#include "squashfs_fs.h"
+#include "squashfs_fs_sb.h"
+#include "squashfs.h"
+#include "decompressor.h"
+#include "page_actor.h"
+
+#define LZ4_LEGACY 1
+
+struct lz4_comp_opts {
+ __le32 version;
+ __le32 flags;
+};
+
+struct squashfs_lz4 {
+ void *input;
+ void *output;
+};
+
+
+static void *lz4_comp_opts(struct squashfs_sb_info *msblk,
+ void *buff, int len)
+{
+ struct lz4_comp_opts *comp_opts = buff;
+
+ /* LZ4 compressed filesystems always have compression options */
+ if (comp_opts == NULL || len < sizeof(*comp_opts))
+ return ERR_PTR(-EIO);
+
+ if (le32_to_cpu(comp_opts->version) != LZ4_LEGACY) {
+ /* LZ4 format currently used by the kernel is the 'legacy'
+ * format */
+ ERROR("Unknown LZ4 version\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return NULL;
+}
+
+
+static void *lz4_init(struct squashfs_sb_info *msblk, void *buff)
+{
+ int block_size = max_t(int, msblk->block_size, SQUASHFS_METADATA_SIZE);
+ struct squashfs_lz4 *stream;
+
+ stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+ if (stream == NULL)
+ goto failed;
+ stream->input = vmalloc(block_size);
+ if (stream->input == NULL)
+ goto failed2;
+ stream->output = vmalloc(block_size);
+ if (stream->output == NULL)
+ goto failed3;
+
+ return stream;
+
+failed3:
+ vfree(stream->input);
+failed2:
+ kfree(stream);
+failed:
+ ERROR("Failed to initialise LZ4 decompressor\n");
+ return ERR_PTR(-ENOMEM);
+}
+
+
+static void lz4_free(void *strm)
+{
+ struct squashfs_lz4 *stream = strm;
+
+ if (stream) {
+ vfree(stream->input);
+ vfree(stream->output);
+ }
+ kfree(stream);
+}
+
+
+static int lz4_uncompress(struct squashfs_sb_info *msblk, void *strm,
+ char **bh, int b, int offset, int length,
+ struct squashfs_page_actor *output)
+{
+ struct squashfs_lz4 *stream = strm;
+ void *buff = stream->input, *data;
+ int avail, i, bytes = length, res;
+ size_t dest_len = output->length;
+
+ for (i = 0; i < b; i++) {
+ avail = min(bytes, msblk->devblksize - offset);
+ memcpy(buff, bh[i] + offset, avail);
+ buff += avail;
+ bytes -= avail;
+ offset = 0;
+ kfree(bh[i]);
+ }
+
+ res = lz4_decompress_unknownoutputsize(stream->input, length,
+ stream->output, &dest_len);
+ if (res)
+ return -EIO;
+
+ bytes = dest_len;
+ data = squashfs_first_page(output);
+ buff = stream->output;
+ while (data) {
+ if (bytes <= PAGE_CACHE_SIZE) {
+ memcpy(data, buff, bytes);
+ break;
+ }
+ memcpy(data, buff, PAGE_CACHE_SIZE);
+ buff += PAGE_CACHE_SIZE;
+ bytes -= PAGE_CACHE_SIZE;
+ data = squashfs_next_page(output);
+ }
+ squashfs_finish_page(output);
+
+ return dest_len;
+}
+
+const struct squashfs_decompressor squashfs_lz4_comp_ops = {
+ .init = lz4_init,
+ .comp_opts = lz4_comp_opts,
+ .free = lz4_free,
+ .decompress = lz4_uncompress,
+ .id = LZ4_COMPRESSION,
+ .name = "lz4",
+ .supported = 1
+};
--
2.9.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-10-04 10:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-04 10:10 [PATCH 0/5] Extend squashfs support Enrico Jorns
2016-10-04 10:10 ` [PATCH 1/5] fs: squashfs: port lzo compression support from kernel Enrico Jorns
2016-10-04 19:34 ` Sascha Hauer
2016-10-12 6:26 ` Yegor Yefremov
2016-10-04 10:10 ` Enrico Jorns [this message]
2016-10-04 10:10 ` [PATCH 3/5] fs: squashfs: port zlib " Enrico Jorns
2016-10-04 19:40 ` Sascha Hauer
2016-10-21 6:04 ` Yegor Yefremov
2016-10-21 6:53 ` Sascha Hauer
2016-10-04 10:10 ` [PATCH 4/5] Add filetype and detection for squashfs images Enrico Jorns
2016-10-06 13:55 ` Yegor Yefremov
2016-10-06 14:10 ` Enrico Joerns
2016-10-07 12:08 ` Yegor Yefremov
2016-10-04 10:10 ` [PATCH 5/5] fs: squashfs: append linux rootarg for ubi volume Enrico Jorns
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161004101048.12970-3-ejo@pengutronix.de \
--to=ejo@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.