All of lore.kernel.org
 help / color / mirror / Atom feed
From: Enrico Jorns <ejo@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Enrico Jorns <ejo@pengutronix.de>
Subject: [PATCH 3/5] fs: squashfs: port zlib compression support from kernel
Date: Tue,  4 Oct 2016 12:10:46 +0200	[thread overview]
Message-ID: <20161004101048.12970-4-ejo@pengutronix.de> (raw)
In-Reply-To: <20161004101048.12970-1-ejo@pengutronix.de>

As this is the default compression method for squashfs, make this the
default in kconfig selection, too

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
---
 fs/squashfs/Kconfig        |  20 ++++++-
 fs/squashfs/Makefile       |   1 +
 fs/squashfs/zlib_wrapper.c | 132 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 152 insertions(+), 1 deletion(-)
 create mode 100644 fs/squashfs/zlib_wrapper.c

diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index d2de168..1cb1ac5 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -17,6 +17,19 @@ menuconfig FS_SQUASHFS
 	  embedded systems where low overhead is needed.  Further information
 	  and tools are available from http://squashfs.sourceforge.net.
 
+config SQUASHFS_ZLIB
+	bool "Include support for ZLIB compressed file systems"
+	depends on FS_SQUASHFS
+	select ZLIB
+	default y
+	help
+	  ZLIB compression is the standard compression used by Squashfs
+	  file systems.  It offers a good trade-off between compression
+	  achieved and the amount of CPU time and memory necessary to
+	  compress and decompress.
+
+	  If unsure, say Y.
+
 config SQUASHFS_LZ4
 	bool "Include support for LZ4 compressed file systems"
 	depends on FS_SQUASHFS
@@ -30,9 +43,10 @@ config SQUASHFS_LZ4
 	  LZ4 is not the standard compression used in Squashfs and so most
 	  file systems will be readable without selecting this option.
 
+	  If unsure, say N.
+
 config SQUASHFS_LZO
 	bool "Include support for LZO compressed file systems"
-	default y
 	depends on FS_SQUASHFS
 	select LZO_DECOMPRESS
 	help
@@ -44,6 +58,8 @@ config SQUASHFS_LZO
 	  LZO is not the standard compression used in Squashfs and so most
 	  file systems will be readable without selecting this option.
 
+	  If unsure, say N.
+
 config SQUASHFS_XZ
 	bool "Include support for XZ compressed file systems"
 	default y
@@ -57,3 +73,5 @@ config SQUASHFS_XZ
 
 	  XZ is not the standard compression used in Squashfs and so most
 	  file systems will be readable without selecting this option.
+
+	  If unsure, say N.
diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index 8590b09..7976e3f 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -13,3 +13,4 @@ obj-y	+= super.o
 obj-$(CONFIG_SQUASHFS_XZ) += xz_wrapper.o
 obj-$(CONFIG_SQUASHFS_LZO) += lzo_wrapper.o
 obj-$(CONFIG_SQUASHFS_LZ4) += lz4_wrapper.o
+obj-$(CONFIG_SQUASHFS_ZLIB) += zlib_wrapper.o
diff --git a/fs/squashfs/zlib_wrapper.c b/fs/squashfs/zlib_wrapper.c
new file mode 100644
index 0000000..f422515
--- /dev/null
+++ b/fs/squashfs/zlib_wrapper.c
@@ -0,0 +1,132 @@
+/*
+ * Squashfs - a compressed read only filesystem for Linux
+ *
+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ * Phillip Lougher <phillip@squashfs.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2,
+ * or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * zlib_wrapper.c
+ */
+
+
+#include <linux/mutex.h>
+#include <linux/zlib.h>
+
+#include "squashfs_fs.h"
+#include "squashfs_fs_sb.h"
+#include "squashfs.h"
+#include "decompressor.h"
+#include "page_actor.h"
+
+static void *zlib_init(struct squashfs_sb_info *dummy, void *buff)
+{
+	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+	if (stream == NULL)
+		goto failed;
+	stream->workspace = vmalloc(zlib_inflate_workspacesize());
+	if (stream->workspace == NULL)
+		goto failed;
+
+	return stream;
+
+failed:
+	ERROR("Failed to allocate zlib workspace\n");
+	kfree(stream);
+	return ERR_PTR(-ENOMEM);
+}
+
+
+static void zlib_free(void *strm)
+{
+	z_stream *stream = strm;
+
+	if (stream)
+		vfree(stream->workspace);
+	kfree(stream);
+}
+
+
+static int zlib_uncompress(struct squashfs_sb_info *msblk, void *strm,
+	char **bh, int b, int offset, int length,
+	struct squashfs_page_actor *output)
+{
+	int zlib_err, zlib_init = 0, k = 0;
+	z_stream *stream = strm;
+
+	stream->avail_out = PAGE_CACHE_SIZE;
+	stream->next_out = squashfs_first_page(output);
+	stream->avail_in = 0;
+
+	do {
+		if (stream->avail_in == 0 && k < b) {
+			int avail = min(length, msblk->devblksize - offset);
+			length -= avail;
+			stream->next_in = bh[k] + offset;
+			stream->avail_in = avail;
+			offset = 0;
+		}
+
+		if (stream->avail_out == 0) {
+			stream->next_out = squashfs_next_page(output);
+			if (stream->next_out != NULL)
+				stream->avail_out = PAGE_CACHE_SIZE;
+		}
+
+		if (!zlib_init) {
+			zlib_err = zlib_inflateInit(stream);
+			if (zlib_err != Z_OK) {
+				squashfs_finish_page(output);
+				goto out;
+			}
+			zlib_init = 1;
+		}
+
+		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
+
+		if (stream->avail_in == 0 && k < b)
+			kfree(bh[k++]);
+	} while (zlib_err == Z_OK);
+
+	squashfs_finish_page(output);
+
+	if (zlib_err != Z_STREAM_END)
+		goto out;
+
+	zlib_err = zlib_inflateEnd(stream);
+	if (zlib_err != Z_OK)
+		goto out;
+
+	if (k < b)
+		goto out;
+
+	return stream->total_out;
+
+out:
+	for (; k < b; k++)
+		kfree(bh[k]);
+
+	return -EIO;
+}
+
+const struct squashfs_decompressor squashfs_zlib_comp_ops = {
+	.init = zlib_init,
+	.free = zlib_free,
+	.decompress = zlib_uncompress,
+	.id = ZLIB_COMPRESSION,
+	.name = "zlib",
+	.supported = 1
+};
+
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-10-04 10:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-04 10:10 [PATCH 0/5] Extend squashfs support Enrico Jorns
2016-10-04 10:10 ` [PATCH 1/5] fs: squashfs: port lzo compression support from kernel Enrico Jorns
2016-10-04 19:34   ` Sascha Hauer
2016-10-12  6:26     ` Yegor Yefremov
2016-10-04 10:10 ` [PATCH 2/5] fs: squashfs: port lz4 " Enrico Jorns
2016-10-04 10:10 ` Enrico Jorns [this message]
2016-10-04 19:40   ` [PATCH 3/5] fs: squashfs: port zlib " Sascha Hauer
2016-10-21  6:04     ` Yegor Yefremov
2016-10-21  6:53       ` Sascha Hauer
2016-10-04 10:10 ` [PATCH 4/5] Add filetype and detection for squashfs images Enrico Jorns
2016-10-06 13:55   ` Yegor Yefremov
2016-10-06 14:10     ` Enrico Joerns
2016-10-07 12:08       ` Yegor Yefremov
2016-10-04 10:10 ` [PATCH 5/5] fs: squashfs: append linux rootarg for ubi volume Enrico Jorns

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161004101048.12970-4-ejo@pengutronix.de \
    --to=ejo@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.