* [PATCH v2 0/4] remoteproc: Add sysfs interface
@ 2016-10-17 15:48 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:48 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen
Cc: linux-remoteproc, linux-kernel, Matt Redfearn
It is often desireable to boot a remote processor with different
firmware files, depending on the needs of the system at a particular
time. This series adds a sysfs interface to the remoteproc core,
exposing interfaces to manipulate the remote processor. One interface is
the "state" file which performs the same function as the one in debugfs
(which is removed later in the series). The other is a "firmware" file
which allows retrieval of the name of the running firmware, and allows a
new firmware to be loaded when written, as long as the remote processor
is currently stopped.
Some groundwork must be laid first, changing the storage mechanism of
the firmware name such that it can be rewritten easily, then that is
wired up to the new sysfs interface.
This series is based on v4.9-rc1
Changes in v2:
Use a kmalloc'd copy of the firmware name instead of having a fixed
length array in struct rproc
New patch to allow access to firmware loading from remoteproc_sysfs.c
Have firmware_store perform the necessary steps inline.
Use sysfs_streq when dealing with writes to sysfs files
Matt Redfearn (4):
remoteproc: Keep local copy of firmware name
remoteproc: Make rproc_add_virtio_devices non-static
remoteproc: Add a sysfs interface for firmware and state
remoteproc: debugfs: Remove state entry which is duplicated is sysfs
Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/remoteproc_core.c | 36 +++---
drivers/remoteproc/remoteproc_debugfs.c | 71 -----------
drivers/remoteproc/remoteproc_internal.h | 6 +
drivers/remoteproc/remoteproc_sysfs.c | 155 +++++++++++++++++++++++
include/linux/remoteproc.h | 2 +-
7 files changed, 233 insertions(+), 88 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc
create mode 100644 drivers/remoteproc/remoteproc_sysfs.c
--
2.7.4
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 1/4] remoteproc: Keep local copy of firmware name
2016-10-17 15:48 ` Matt Redfearn
@ 2016-10-17 15:48 ` Matt Redfearn
-1 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:48 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen; +Cc: linux-remoteproc, linux-kernel, Matt
Storage of the firmware name was inconsistent, either storing a pointer
to a name stored with unknown ownership, or a variable length tacked
onto the end of the struct proc allocated in rproc_alloc.
In preparation for allowing the firmware of an already allocated struct
rproc to be changed, instead always keep a locally maintained copy of
the firmware name.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2:
Use a kmalloc'd copy of the firmware name instead of having a fixed
length array in struct rproc
drivers/remoteproc/remoteproc_core.c | 31 ++++++++++++++++---------------
include/linux/remoteproc.h | 2 +-
2 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index c6bfb3496684..ccc2a73e94dd 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1273,6 +1273,7 @@ static void rproc_type_release(struct device *dev)
if (rproc->index >= 0)
ida_simple_remove(&rproc_dev_index, rproc->index);
+ kfree(rproc->firmware);
kfree(rproc);
}
@@ -1310,31 +1311,31 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
{
struct rproc *rproc;
char *p, *template = "rproc-%s-fw";
- int name_len = 0;
+ int name_len;
if (!dev || !name || !ops)
return NULL;
- if (!firmware)
+ if (!firmware) {
/*
- * Make room for default firmware name (minus %s plus '\0').
* If the caller didn't pass in a firmware name then
- * construct a default name. We're already glomming 'len'
- * bytes onto the end of the struct rproc allocation, so do
- * a few more for the default firmware name (but only if
- * the caller doesn't pass one).
+ * construct a default name.
*/
name_len = strlen(name) + strlen(template) - 2 + 1;
-
- rproc = kzalloc(sizeof(*rproc) + len + name_len, GFP_KERNEL);
- if (!rproc)
- return NULL;
-
- if (!firmware) {
- p = (char *)rproc + sizeof(struct rproc) + len;
+ p = kmalloc(name_len, GFP_KERNEL);
+ if (!p)
+ return NULL;
snprintf(p, name_len, template, name);
} else {
- p = (char *)firmware;
+ p = kstrdup(firmware, GFP_KERNEL);
+ if (!p)
+ return NULL;
+ }
+
+ rproc = kzalloc(sizeof(struct rproc) + len, GFP_KERNEL);
+ if (!rproc) {
+ kfree(p);
+ return NULL;
}
rproc->firmware = p;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 930023b7c825..940e4cf2ac48 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -415,7 +415,7 @@ struct rproc {
struct list_head node;
struct iommu_domain *domain;
const char *name;
- const char *firmware;
+ char *firmware;
void *priv;
const struct rproc_ops *ops;
struct device dev;
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 1/4] remoteproc: Keep local copy of firmware name
@ 2016-10-17 15:48 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:48 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen
Cc: linux-remoteproc, linux-kernel, Matt Redfearn
Storage of the firmware name was inconsistent, either storing a pointer
to a name stored with unknown ownership, or a variable length tacked
onto the end of the struct proc allocated in rproc_alloc.
In preparation for allowing the firmware of an already allocated struct
rproc to be changed, instead always keep a locally maintained copy of
the firmware name.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2:
Use a kmalloc'd copy of the firmware name instead of having a fixed
length array in struct rproc
drivers/remoteproc/remoteproc_core.c | 31 ++++++++++++++++---------------
include/linux/remoteproc.h | 2 +-
2 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index c6bfb3496684..ccc2a73e94dd 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1273,6 +1273,7 @@ static void rproc_type_release(struct device *dev)
if (rproc->index >= 0)
ida_simple_remove(&rproc_dev_index, rproc->index);
+ kfree(rproc->firmware);
kfree(rproc);
}
@@ -1310,31 +1311,31 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
{
struct rproc *rproc;
char *p, *template = "rproc-%s-fw";
- int name_len = 0;
+ int name_len;
if (!dev || !name || !ops)
return NULL;
- if (!firmware)
+ if (!firmware) {
/*
- * Make room for default firmware name (minus %s plus '\0').
* If the caller didn't pass in a firmware name then
- * construct a default name. We're already glomming 'len'
- * bytes onto the end of the struct rproc allocation, so do
- * a few more for the default firmware name (but only if
- * the caller doesn't pass one).
+ * construct a default name.
*/
name_len = strlen(name) + strlen(template) - 2 + 1;
-
- rproc = kzalloc(sizeof(*rproc) + len + name_len, GFP_KERNEL);
- if (!rproc)
- return NULL;
-
- if (!firmware) {
- p = (char *)rproc + sizeof(struct rproc) + len;
+ p = kmalloc(name_len, GFP_KERNEL);
+ if (!p)
+ return NULL;
snprintf(p, name_len, template, name);
} else {
- p = (char *)firmware;
+ p = kstrdup(firmware, GFP_KERNEL);
+ if (!p)
+ return NULL;
+ }
+
+ rproc = kzalloc(sizeof(struct rproc) + len, GFP_KERNEL);
+ if (!rproc) {
+ kfree(p);
+ return NULL;
}
rproc->firmware = p;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 930023b7c825..940e4cf2ac48 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -415,7 +415,7 @@ struct rproc {
struct list_head node;
struct iommu_domain *domain;
const char *name;
- const char *firmware;
+ char *firmware;
void *priv;
const struct rproc_ops *ops;
struct device dev;
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v2 1/4] remoteproc: Keep local copy of firmware name
2016-10-17 15:48 ` Matt Redfearn
(?)
@ 2016-10-18 22:03 ` Bjorn Andersson
-1 siblings, 0 replies; 15+ messages in thread
From: Bjorn Andersson @ 2016-10-18 22:03 UTC (permalink / raw)
To: Matt Redfearn; +Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel
On Mon 17 Oct 08:48 PDT 2016, Matt Redfearn wrote:
> Storage of the firmware name was inconsistent, either storing a pointer
> to a name stored with unknown ownership, or a variable length tacked
> onto the end of the struct proc allocated in rproc_alloc.
>
> In preparation for allowing the firmware of an already allocated struct
> rproc to be changed, instead always keep a locally maintained copy of
> the firmware name.
>
> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Applied, thanks
> ---
>
> Changes in v2:
> Use a kmalloc'd copy of the firmware name instead of having a fixed
> length array in struct rproc
>
> drivers/remoteproc/remoteproc_core.c | 31 ++++++++++++++++---------------
> include/linux/remoteproc.h | 2 +-
> 2 files changed, 17 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index c6bfb3496684..ccc2a73e94dd 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -1273,6 +1273,7 @@ static void rproc_type_release(struct device *dev)
> if (rproc->index >= 0)
> ida_simple_remove(&rproc_dev_index, rproc->index);
>
> + kfree(rproc->firmware);
> kfree(rproc);
> }
>
> @@ -1310,31 +1311,31 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
> {
> struct rproc *rproc;
> char *p, *template = "rproc-%s-fw";
> - int name_len = 0;
> + int name_len;
>
> if (!dev || !name || !ops)
> return NULL;
>
> - if (!firmware)
> + if (!firmware) {
> /*
> - * Make room for default firmware name (minus %s plus '\0').
> * If the caller didn't pass in a firmware name then
> - * construct a default name. We're already glomming 'len'
> - * bytes onto the end of the struct rproc allocation, so do
> - * a few more for the default firmware name (but only if
> - * the caller doesn't pass one).
> + * construct a default name.
> */
> name_len = strlen(name) + strlen(template) - 2 + 1;
> -
> - rproc = kzalloc(sizeof(*rproc) + len + name_len, GFP_KERNEL);
> - if (!rproc)
> - return NULL;
> -
> - if (!firmware) {
> - p = (char *)rproc + sizeof(struct rproc) + len;
> + p = kmalloc(name_len, GFP_KERNEL);
> + if (!p)
> + return NULL;
> snprintf(p, name_len, template, name);
> } else {
> - p = (char *)firmware;
> + p = kstrdup(firmware, GFP_KERNEL);
> + if (!p)
> + return NULL;
> + }
> +
> + rproc = kzalloc(sizeof(struct rproc) + len, GFP_KERNEL);
> + if (!rproc) {
> + kfree(p);
> + return NULL;
> }
>
> rproc->firmware = p;
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 930023b7c825..940e4cf2ac48 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -415,7 +415,7 @@ struct rproc {
> struct list_head node;
> struct iommu_domain *domain;
> const char *name;
> - const char *firmware;
> + char *firmware;
> void *priv;
> const struct rproc_ops *ops;
> struct device dev;
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 2/4] remoteproc: Make rproc_add_virtio_devices non-static
2016-10-17 15:48 ` Matt Redfearn
@ 2016-10-17 15:48 ` Matt Redfearn
-1 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:48 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen; +Cc: linux-remoteproc, linux-kernel, Matt
This function will be required in pther files by the next patch in the
series.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2:
New patch to allow access to firmware loading from remoteproc_sysfs.c
drivers/remoteproc/remoteproc_core.c | 2 +-
drivers/remoteproc/remoteproc_internal.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index ccc2a73e94dd..d86b4be956a9 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -916,7 +916,7 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
complete_all(&rproc->firmware_loading_complete);
}
-static int rproc_add_virtio_devices(struct rproc *rproc)
+int rproc_add_virtio_devices(struct rproc *rproc)
{
int ret;
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 4cf93ca2816e..82345930ecbd 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -49,6 +49,7 @@ struct rproc_fw_ops {
void rproc_release(struct kref *kref);
irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
int rproc_boot_nowait(struct rproc *rproc);
+int rproc_add_virtio_devices(struct rproc *rproc);
/* from remoteproc_virtio.c */
int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id);
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 2/4] remoteproc: Make rproc_add_virtio_devices non-static
@ 2016-10-17 15:48 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:48 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen
Cc: linux-remoteproc, linux-kernel, Matt Redfearn
This function will be required in pther files by the next patch in the
series.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2:
New patch to allow access to firmware loading from remoteproc_sysfs.c
drivers/remoteproc/remoteproc_core.c | 2 +-
drivers/remoteproc/remoteproc_internal.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index ccc2a73e94dd..d86b4be956a9 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -916,7 +916,7 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
complete_all(&rproc->firmware_loading_complete);
}
-static int rproc_add_virtio_devices(struct rproc *rproc)
+int rproc_add_virtio_devices(struct rproc *rproc)
{
int ret;
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 4cf93ca2816e..82345930ecbd 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -49,6 +49,7 @@ struct rproc_fw_ops {
void rproc_release(struct kref *kref);
irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
int rproc_boot_nowait(struct rproc *rproc);
+int rproc_add_virtio_devices(struct rproc *rproc);
/* from remoteproc_virtio.c */
int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id);
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 3/4] remoteproc: Add a sysfs interface for firmware and state
2016-10-17 15:48 ` Matt Redfearn
@ 2016-10-17 15:49 ` Matt Redfearn
-1 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:49 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen; +Cc: linux-remoteproc, linux-kernel, Matt
This patch adds a sysfs interface to rproc allowing the firmware name
and processor state to be changed dynamically.
State was previously available in debugfs, and is replicated here. The
firmware file allows retrieval of the running firmware name, and a new
one to be specified at run time, so long as the remote processor has
been stopped.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2:
Have firmware_store perform the necessary steps inline.
Use sysfs_streq when dealing with writes to sysfs files
Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/remoteproc_core.c | 3 +
drivers/remoteproc/remoteproc_internal.h | 5 +
drivers/remoteproc/remoteproc_sysfs.c | 155 +++++++++++++++++++++++
5 files changed, 214 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc
create mode 100644 drivers/remoteproc/remoteproc_sysfs.c
diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
new file mode 100644
index 000000000000..d188afebc8ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -0,0 +1,50 @@
+What: /sys/class/remoteproc/.../firmware
+Date: October 2016
+Contact: Matt Redfearn <matt.redfearn@imgtec.com>
+Description: Remote processor firmware
+
+ Reports the name of the firmware currently loaded to the
+ remote processor.
+
+ To change the running firmware, ensure the remote processor is
+ stopped (using /sys/class/remoteproc/.../state) and write a new filename.
+
+What: /sys/class/remoteproc/.../state
+Date: October 2016
+Contact: Matt Redfearn <matt.redfearn@imgtec.com>
+Description: Remote processor state
+
+ Reports the state of the remote processor, which will be one of:
+
+ "offline"
+ "suspended"
+ "running"
+ "crashed"
+ "invalid"
+
+ "offline" means the remote processor is powered off.
+
+ "suspended" means that the remote processor is suspended and
+ must be woken to receive messages.
+
+ "running" is the normal state of an available remote processor
+
+ "crashed" indicates that a problem/crash has been detected on
+ the remote processor.
+
+ "invalid" is returned if the remote processor is in an
+ unknown state.
+
+ Writing this file controls the state of the remote processor.
+ The following states can be written:
+
+ "start"
+ "stop"
+
+ Writing "start" will attempt to start the processor running the
+ firmware indicated by, or written to,
+ /sys/class/remoteproc/.../firmware. The remote processor should
+ transition to "running" state.
+
+ Writing "stop" will attempt to halt the remote processor and
+ return it to the "offline" state.
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 6dfb62ed643f..6da9b12f9798 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_REMOTEPROC) += remoteproc.o
remoteproc-y := remoteproc_core.o
remoteproc-y += remoteproc_debugfs.o
+remoteproc-y += remoteproc_sysfs.o
remoteproc-y += remoteproc_virtio.o
remoteproc-y += remoteproc_elf_loader.o
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index d86b4be956a9..e302036d29e7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1347,6 +1347,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
device_initialize(&rproc->dev);
rproc->dev.parent = dev;
rproc->dev.type = &rproc_type;
+ rproc->dev.class = &rproc_class;
/* Assign a unique device index and name */
rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL);
@@ -1485,6 +1486,7 @@ EXPORT_SYMBOL(rproc_report_crash);
static int __init remoteproc_init(void)
{
+ rproc_init_sysfs();
rproc_init_debugfs();
return 0;
@@ -1496,6 +1498,7 @@ static void __exit remoteproc_exit(void)
ida_destroy(&rproc_dev_index);
rproc_exit_debugfs();
+ rproc_exit_sysfs();
}
module_exit(remoteproc_exit);
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 82345930ecbd..fce736251a7f 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -64,6 +64,11 @@ void rproc_create_debug_dir(struct rproc *rproc);
void rproc_init_debugfs(void);
void rproc_exit_debugfs(void);
+/* from remoteproc_sysfs.c */
+extern struct class rproc_class;
+int rproc_init_sysfs(void);
+void rproc_exit_sysfs(void);
+
void rproc_free_vring(struct rproc_vring *rvring);
int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
new file mode 100644
index 000000000000..afa9ca040a7e
--- /dev/null
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -0,0 +1,155 @@
+/*
+ * Remote Processor Framework
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+
+#define to_rproc(d) container_of(d, struct rproc, dev)
+
+/* Expose the loaded / running firmware name via sysfs */
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rproc *rproc = to_rproc(dev);
+
+ return sprintf(buf, "%s\n", rproc->firmware);
+}
+
+/* Change firmware name via sysfs */
+static ssize_t firmware_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rproc *rproc = to_rproc(dev);
+ char *p;
+ int err, len = count;
+
+ err = mutex_lock_interruptible(&rproc->lock);
+ if (err) {
+ dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err);
+ return -EINVAL;
+ }
+
+ if (rproc->state != RPROC_OFFLINE) {
+ dev_err(dev, "can't change firmware while running\n");
+ err = -EBUSY;
+ goto out;
+ }
+
+ p = memchr(buf, '\n', count);
+ if (p)
+ len = p - buf;
+
+ p = kstrndup(buf, len, GFP_KERNEL);
+ if (!p) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ kfree(rproc->firmware);
+ rproc->firmware = p;
+
+ err = rproc_add_virtio_devices(rproc);
+out:
+ mutex_unlock(&rproc->lock);
+
+ return err ? err : count;
+}
+static DEVICE_ATTR_RW(firmware);
+
+/*
+ * A state-to-string lookup table, for exposing a human readable state
+ * via sysfs. Always keep in sync with enum rproc_state
+ */
+static const char * const rproc_state_string[] = {
+ "offline",
+ "suspended",
+ "running",
+ "crashed",
+ "invalid",
+};
+
+/* Expose the state of the remote processor via sysfs */
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rproc *rproc = to_rproc(dev);
+ unsigned int state;
+
+ state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
+ return sprintf(buf, "%s\n", rproc_state_string[state]);
+}
+
+/* Change remote processor state via sysfs */
+static ssize_t state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rproc *rproc = to_rproc(dev);
+ int ret = 0;
+
+ if (sysfs_streq(buf, "start")) {
+ if (rproc->state == RPROC_RUNNING)
+ return -EBUSY;
+
+ ret = rproc_boot(rproc);
+ if (ret)
+ dev_err(&rproc->dev, "Boot failed: %d\n", ret);
+ } else if (sysfs_streq(buf, "stop")) {
+ if (rproc->state != RPROC_RUNNING)
+ return -EINVAL;
+
+ rproc_shutdown(rproc);
+ } else {
+ dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
+ ret = -EINVAL;
+ }
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(state);
+
+static struct attribute *rproc_attrs[] = {
+ &dev_attr_firmware.attr,
+ &dev_attr_state.attr,
+ NULL
+};
+
+static const struct attribute_group rproc_devgroup = {
+ .attrs = rproc_attrs
+};
+
+static const struct attribute_group *rproc_devgroups[] = {
+ &rproc_devgroup,
+ NULL
+};
+
+struct class rproc_class = {
+ .name = "remoteproc",
+ .dev_groups = rproc_devgroups,
+};
+
+int __init rproc_init_sysfs(void)
+{
+ /* create remoteproc device class for sysfs */
+ int err = class_register(&rproc_class);
+
+ if (err)
+ pr_err("remoteproc: unable to register class\n");
+ return err;
+}
+
+void __exit rproc_exit_sysfs(void)
+{
+ class_unregister(&rproc_class);
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 3/4] remoteproc: Add a sysfs interface for firmware and state
@ 2016-10-17 15:49 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:49 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen
Cc: linux-remoteproc, linux-kernel, Matt Redfearn
This patch adds a sysfs interface to rproc allowing the firmware name
and processor state to be changed dynamically.
State was previously available in debugfs, and is replicated here. The
firmware file allows retrieval of the running firmware name, and a new
one to be specified at run time, so long as the remote processor has
been stopped.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2:
Have firmware_store perform the necessary steps inline.
Use sysfs_streq when dealing with writes to sysfs files
Documentation/ABI/testing/sysfs-class-remoteproc | 50 ++++++++
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/remoteproc_core.c | 3 +
drivers/remoteproc/remoteproc_internal.h | 5 +
drivers/remoteproc/remoteproc_sysfs.c | 155 +++++++++++++++++++++++
5 files changed, 214 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-remoteproc
create mode 100644 drivers/remoteproc/remoteproc_sysfs.c
diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
new file mode 100644
index 000000000000..d188afebc8ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -0,0 +1,50 @@
+What: /sys/class/remoteproc/.../firmware
+Date: October 2016
+Contact: Matt Redfearn <matt.redfearn@imgtec.com>
+Description: Remote processor firmware
+
+ Reports the name of the firmware currently loaded to the
+ remote processor.
+
+ To change the running firmware, ensure the remote processor is
+ stopped (using /sys/class/remoteproc/.../state) and write a new filename.
+
+What: /sys/class/remoteproc/.../state
+Date: October 2016
+Contact: Matt Redfearn <matt.redfearn@imgtec.com>
+Description: Remote processor state
+
+ Reports the state of the remote processor, which will be one of:
+
+ "offline"
+ "suspended"
+ "running"
+ "crashed"
+ "invalid"
+
+ "offline" means the remote processor is powered off.
+
+ "suspended" means that the remote processor is suspended and
+ must be woken to receive messages.
+
+ "running" is the normal state of an available remote processor
+
+ "crashed" indicates that a problem/crash has been detected on
+ the remote processor.
+
+ "invalid" is returned if the remote processor is in an
+ unknown state.
+
+ Writing this file controls the state of the remote processor.
+ The following states can be written:
+
+ "start"
+ "stop"
+
+ Writing "start" will attempt to start the processor running the
+ firmware indicated by, or written to,
+ /sys/class/remoteproc/.../firmware. The remote processor should
+ transition to "running" state.
+
+ Writing "stop" will attempt to halt the remote processor and
+ return it to the "offline" state.
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 6dfb62ed643f..6da9b12f9798 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_REMOTEPROC) += remoteproc.o
remoteproc-y := remoteproc_core.o
remoteproc-y += remoteproc_debugfs.o
+remoteproc-y += remoteproc_sysfs.o
remoteproc-y += remoteproc_virtio.o
remoteproc-y += remoteproc_elf_loader.o
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index d86b4be956a9..e302036d29e7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1347,6 +1347,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
device_initialize(&rproc->dev);
rproc->dev.parent = dev;
rproc->dev.type = &rproc_type;
+ rproc->dev.class = &rproc_class;
/* Assign a unique device index and name */
rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL);
@@ -1485,6 +1486,7 @@ EXPORT_SYMBOL(rproc_report_crash);
static int __init remoteproc_init(void)
{
+ rproc_init_sysfs();
rproc_init_debugfs();
return 0;
@@ -1496,6 +1498,7 @@ static void __exit remoteproc_exit(void)
ida_destroy(&rproc_dev_index);
rproc_exit_debugfs();
+ rproc_exit_sysfs();
}
module_exit(remoteproc_exit);
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 82345930ecbd..fce736251a7f 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -64,6 +64,11 @@ void rproc_create_debug_dir(struct rproc *rproc);
void rproc_init_debugfs(void);
void rproc_exit_debugfs(void);
+/* from remoteproc_sysfs.c */
+extern struct class rproc_class;
+int rproc_init_sysfs(void);
+void rproc_exit_sysfs(void);
+
void rproc_free_vring(struct rproc_vring *rvring);
int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
new file mode 100644
index 000000000000..afa9ca040a7e
--- /dev/null
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -0,0 +1,155 @@
+/*
+ * Remote Processor Framework
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+
+#define to_rproc(d) container_of(d, struct rproc, dev)
+
+/* Expose the loaded / running firmware name via sysfs */
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rproc *rproc = to_rproc(dev);
+
+ return sprintf(buf, "%s\n", rproc->firmware);
+}
+
+/* Change firmware name via sysfs */
+static ssize_t firmware_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rproc *rproc = to_rproc(dev);
+ char *p;
+ int err, len = count;
+
+ err = mutex_lock_interruptible(&rproc->lock);
+ if (err) {
+ dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err);
+ return -EINVAL;
+ }
+
+ if (rproc->state != RPROC_OFFLINE) {
+ dev_err(dev, "can't change firmware while running\n");
+ err = -EBUSY;
+ goto out;
+ }
+
+ p = memchr(buf, '\n', count);
+ if (p)
+ len = p - buf;
+
+ p = kstrndup(buf, len, GFP_KERNEL);
+ if (!p) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ kfree(rproc->firmware);
+ rproc->firmware = p;
+
+ err = rproc_add_virtio_devices(rproc);
+out:
+ mutex_unlock(&rproc->lock);
+
+ return err ? err : count;
+}
+static DEVICE_ATTR_RW(firmware);
+
+/*
+ * A state-to-string lookup table, for exposing a human readable state
+ * via sysfs. Always keep in sync with enum rproc_state
+ */
+static const char * const rproc_state_string[] = {
+ "offline",
+ "suspended",
+ "running",
+ "crashed",
+ "invalid",
+};
+
+/* Expose the state of the remote processor via sysfs */
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rproc *rproc = to_rproc(dev);
+ unsigned int state;
+
+ state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
+ return sprintf(buf, "%s\n", rproc_state_string[state]);
+}
+
+/* Change remote processor state via sysfs */
+static ssize_t state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rproc *rproc = to_rproc(dev);
+ int ret = 0;
+
+ if (sysfs_streq(buf, "start")) {
+ if (rproc->state == RPROC_RUNNING)
+ return -EBUSY;
+
+ ret = rproc_boot(rproc);
+ if (ret)
+ dev_err(&rproc->dev, "Boot failed: %d\n", ret);
+ } else if (sysfs_streq(buf, "stop")) {
+ if (rproc->state != RPROC_RUNNING)
+ return -EINVAL;
+
+ rproc_shutdown(rproc);
+ } else {
+ dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
+ ret = -EINVAL;
+ }
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(state);
+
+static struct attribute *rproc_attrs[] = {
+ &dev_attr_firmware.attr,
+ &dev_attr_state.attr,
+ NULL
+};
+
+static const struct attribute_group rproc_devgroup = {
+ .attrs = rproc_attrs
+};
+
+static const struct attribute_group *rproc_devgroups[] = {
+ &rproc_devgroup,
+ NULL
+};
+
+struct class rproc_class = {
+ .name = "remoteproc",
+ .dev_groups = rproc_devgroups,
+};
+
+int __init rproc_init_sysfs(void)
+{
+ /* create remoteproc device class for sysfs */
+ int err = class_register(&rproc_class);
+
+ if (err)
+ pr_err("remoteproc: unable to register class\n");
+ return err;
+}
+
+void __exit rproc_exit_sysfs(void)
+{
+ class_unregister(&rproc_class);
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/4] remoteproc: Add a sysfs interface for firmware and state
2016-10-17 15:49 ` Matt Redfearn
(?)
@ 2016-10-18 22:16 ` Bjorn Andersson
2016-10-19 11:04 ` Matt Redfearn
-1 siblings, 1 reply; 15+ messages in thread
From: Bjorn Andersson @ 2016-10-18 22:16 UTC (permalink / raw)
To: Matt Redfearn; +Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel
On Mon 17 Oct 08:49 PDT 2016, Matt Redfearn wrote:
> This patch adds a sysfs interface to rproc allowing the firmware name
> and processor state to be changed dynamically.
>
> State was previously available in debugfs, and is replicated here. The
> firmware file allows retrieval of the running firmware name, and a new
> one to be specified at run time, so long as the remote processor has
> been stopped.
>
> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
>
> ---
>
> Changes in v2:
> Have firmware_store perform the necessary steps inline.
> Use sysfs_streq when dealing with writes to sysfs files
>
[..]
> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
> new file mode 100644
> index 000000000000..afa9ca040a7e
> --- /dev/null
> +++ b/drivers/remoteproc/remoteproc_sysfs.c
> @@ -0,0 +1,155 @@
> +/*
> + * Remote Processor Framework
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/remoteproc.h>
> +
> +#include "remoteproc_internal.h"
> +
> +#define to_rproc(d) container_of(d, struct rproc, dev)
> +
> +/* Expose the loaded / running firmware name via sysfs */
> +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct rproc *rproc = to_rproc(dev);
> +
> + return sprintf(buf, "%s\n", rproc->firmware);
> +}
> +
> +/* Change firmware name via sysfs */
> +static ssize_t firmware_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct rproc *rproc = to_rproc(dev);
> + char *p;
> + int err, len = count;
> +
> + err = mutex_lock_interruptible(&rproc->lock);
> + if (err) {
> + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err);
> + return -EINVAL;
> + }
> +
> + if (rproc->state != RPROC_OFFLINE) {
> + dev_err(dev, "can't change firmware while running\n");
> + err = -EBUSY;
> + goto out;
> + }
> +
> + p = memchr(buf, '\n', count);
> + if (p)
> + len = p - buf;
I prefer the following variant:
len = strcspn(buf, '\n');
> +
> + p = kstrndup(buf, len, GFP_KERNEL);
> + if (!p) {
> + err = -ENOMEM;
> + goto out;
> + }
> +
> + kfree(rproc->firmware);
> + rproc->firmware = p;
> +
> + err = rproc_add_virtio_devices(rproc);
As of v4.9 rproc_add_virtio_devices() will only check to see if the
rproc driver has auto_boot set and if so boot the core. (Yes it needs a
new name)
Also I'm not sure if it's valid to provide a sysfs API like this and
sometimes setting firmware results in rproc_boot() and sometimes not...
So, just drop patch 2 in this series and drop the call to
rproc_add_virtio_devices() here.
> +out:
> + mutex_unlock(&rproc->lock);
> +
> + return err ? err : count;
> +}
> +static DEVICE_ATTR_RW(firmware);
> +
> +/*
> + * A state-to-string lookup table, for exposing a human readable state
> + * via sysfs. Always keep in sync with enum rproc_state
> + */
> +static const char * const rproc_state_string[] = {
> + "offline",
Please be overly explicit here and make these:
[RPROC_OFFLINE] = "offline",
> + "suspended",
> + "running",
> + "crashed",
> + "invalid",
> +};
> +
Regards,
Bjorn
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/4] remoteproc: Add a sysfs interface for firmware and state
2016-10-18 22:16 ` Bjorn Andersson
@ 2016-10-19 11:04 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-19 11:04 UTC (permalink / raw)
To: Bjorn Andersson; +Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel
Hi Bjorn,
On 18/10/16 23:16, Bjorn Andersson wrote:
> On Mon 17 Oct 08:49 PDT 2016, Matt Redfearn wrote:
>
>> This patch adds a sysfs interface to rproc allowing the firmware name
>> and processor state to be changed dynamically.
>>
>> State was previously available in debugfs, and is replicated here. The
>> firmware file allows retrieval of the running firmware name, and a new
>> one to be specified at run time, so long as the remote processor has
>> been stopped.
>>
>> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
>>
>> ---
>>
>> Changes in v2:
>> Have firmware_store perform the necessary steps inline.
>> Use sysfs_streq when dealing with writes to sysfs files
>>
> [..]
>> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
>> new file mode 100644
>> index 000000000000..afa9ca040a7e
>> --- /dev/null
>> +++ b/drivers/remoteproc/remoteproc_sysfs.c
>> @@ -0,0 +1,155 @@
>> +/*
>> + * Remote Processor Framework
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/remoteproc.h>
>> +
>> +#include "remoteproc_internal.h"
>> +
>> +#define to_rproc(d) container_of(d, struct rproc, dev)
>> +
>> +/* Expose the loaded / running firmware name via sysfs */
>> +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct rproc *rproc = to_rproc(dev);
>> +
>> + return sprintf(buf, "%s\n", rproc->firmware);
>> +}
>> +
>> +/* Change firmware name via sysfs */
>> +static ssize_t firmware_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct rproc *rproc = to_rproc(dev);
>> + char *p;
>> + int err, len = count;
>> +
>> + err = mutex_lock_interruptible(&rproc->lock);
>> + if (err) {
>> + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err);
>> + return -EINVAL;
>> + }
>> +
>> + if (rproc->state != RPROC_OFFLINE) {
>> + dev_err(dev, "can't change firmware while running\n");
>> + err = -EBUSY;
>> + goto out;
>> + }
>> +
>> + p = memchr(buf, '\n', count);
>> + if (p)
>> + len = p - buf;
> I prefer the following variant:
>
> len = strcspn(buf, '\n');
Yes - that's neater.
>
>> +
>> + p = kstrndup(buf, len, GFP_KERNEL);
>> + if (!p) {
>> + err = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + kfree(rproc->firmware);
>> + rproc->firmware = p;
>> +
>> + err = rproc_add_virtio_devices(rproc);
> As of v4.9 rproc_add_virtio_devices() will only check to see if the
> rproc driver has auto_boot set and if so boot the core. (Yes it needs a
> new name)
>
> Also I'm not sure if it's valid to provide a sysfs API like this and
> sometimes setting firmware results in rproc_boot() and sometimes not...
>
> So, just drop patch 2 in this series and drop the call to
> rproc_add_virtio_devices() here.
Makes sense, and it's more consistent behavior with that change.
>
>> +out:
>> + mutex_unlock(&rproc->lock);
>> +
>> + return err ? err : count;
>> +}
>> +static DEVICE_ATTR_RW(firmware);
>> +
>> +/*
>> + * A state-to-string lookup table, for exposing a human readable state
>> + * via sysfs. Always keep in sync with enum rproc_state
>> + */
>> +static const char * const rproc_state_string[] = {
>> + "offline",
> Please be overly explicit here and make these:
>
> [RPROC_OFFLINE] = "offline",
No problem.
Thanks,
Matt
>
>> + "suspended",
>> + "running",
>> + "crashed",
>> + "invalid",
>> +};
>> +
> Regards,
> Bjorn
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v2 3/4] remoteproc: Add a sysfs interface for firmware and state
@ 2016-10-19 11:04 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-19 11:04 UTC (permalink / raw)
To: Bjorn Andersson; +Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel
Hi Bjorn,
On 18/10/16 23:16, Bjorn Andersson wrote:
> On Mon 17 Oct 08:49 PDT 2016, Matt Redfearn wrote:
>
>> This patch adds a sysfs interface to rproc allowing the firmware name
>> and processor state to be changed dynamically.
>>
>> State was previously available in debugfs, and is replicated here. The
>> firmware file allows retrieval of the running firmware name, and a new
>> one to be specified at run time, so long as the remote processor has
>> been stopped.
>>
>> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
>>
>> ---
>>
>> Changes in v2:
>> Have firmware_store perform the necessary steps inline.
>> Use sysfs_streq when dealing with writes to sysfs files
>>
> [..]
>> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
>> new file mode 100644
>> index 000000000000..afa9ca040a7e
>> --- /dev/null
>> +++ b/drivers/remoteproc/remoteproc_sysfs.c
>> @@ -0,0 +1,155 @@
>> +/*
>> + * Remote Processor Framework
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/remoteproc.h>
>> +
>> +#include "remoteproc_internal.h"
>> +
>> +#define to_rproc(d) container_of(d, struct rproc, dev)
>> +
>> +/* Expose the loaded / running firmware name via sysfs */
>> +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct rproc *rproc = to_rproc(dev);
>> +
>> + return sprintf(buf, "%s\n", rproc->firmware);
>> +}
>> +
>> +/* Change firmware name via sysfs */
>> +static ssize_t firmware_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct rproc *rproc = to_rproc(dev);
>> + char *p;
>> + int err, len = count;
>> +
>> + err = mutex_lock_interruptible(&rproc->lock);
>> + if (err) {
>> + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, err);
>> + return -EINVAL;
>> + }
>> +
>> + if (rproc->state != RPROC_OFFLINE) {
>> + dev_err(dev, "can't change firmware while running\n");
>> + err = -EBUSY;
>> + goto out;
>> + }
>> +
>> + p = memchr(buf, '\n', count);
>> + if (p)
>> + len = p - buf;
> I prefer the following variant:
>
> len = strcspn(buf, '\n');
Yes - that's neater.
>
>> +
>> + p = kstrndup(buf, len, GFP_KERNEL);
>> + if (!p) {
>> + err = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + kfree(rproc->firmware);
>> + rproc->firmware = p;
>> +
>> + err = rproc_add_virtio_devices(rproc);
> As of v4.9 rproc_add_virtio_devices() will only check to see if the
> rproc driver has auto_boot set and if so boot the core. (Yes it needs a
> new name)
>
> Also I'm not sure if it's valid to provide a sysfs API like this and
> sometimes setting firmware results in rproc_boot() and sometimes not...
>
> So, just drop patch 2 in this series and drop the call to
> rproc_add_virtio_devices() here.
Makes sense, and it's more consistent behavior with that change.
>
>> +out:
>> + mutex_unlock(&rproc->lock);
>> +
>> + return err ? err : count;
>> +}
>> +static DEVICE_ATTR_RW(firmware);
>> +
>> +/*
>> + * A state-to-string lookup table, for exposing a human readable state
>> + * via sysfs. Always keep in sync with enum rproc_state
>> + */
>> +static const char * const rproc_state_string[] = {
>> + "offline",
> Please be overly explicit here and make these:
>
> [RPROC_OFFLINE] = "offline",
No problem.
Thanks,
Matt
>
>> + "suspended",
>> + "running",
>> + "crashed",
>> + "invalid",
>> +};
>> +
> Regards,
> Bjorn
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 4/4] remoteproc: debugfs: Remove state entry which is duplicated is sysfs
2016-10-17 15:48 ` Matt Redfearn
@ 2016-10-17 15:49 ` Matt Redfearn
-1 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:49 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen; +Cc: linux-remoteproc, linux-kernel, Matt
Since there is now an always available state file in sysfs with the same
function as this one in debugfs, remove the redundant entry.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2: None
drivers/remoteproc/remoteproc_debugfs.c | 71 ---------------------------------
1 file changed, 71 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 374797206c79..1c122e230cec 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -59,75 +59,6 @@ static const struct file_operations trace_rproc_ops = {
.llseek = generic_file_llseek,
};
-/*
- * A state-to-string lookup table, for exposing a human readable state
- * via debugfs. Always keep in sync with enum rproc_state
- */
-static const char * const rproc_state_string[] = {
- "offline",
- "suspended",
- "running",
- "crashed",
- "invalid",
-};
-
-/* expose the state of the remote processor via debugfs */
-static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct rproc *rproc = filp->private_data;
- unsigned int state;
- char buf[30];
- int i;
-
- state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
-
- i = scnprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state],
- rproc->state);
-
- return simple_read_from_buffer(userbuf, count, ppos, buf, i);
-}
-
-static ssize_t rproc_state_write(struct file *filp, const char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct rproc *rproc = filp->private_data;
- char buf[10];
- int ret;
-
- if (count > sizeof(buf) || count <= 0)
- return -EINVAL;
-
- ret = copy_from_user(buf, userbuf, count);
- if (ret)
- return -EFAULT;
-
- if (buf[count - 1] == '\n')
- buf[count - 1] = '\0';
-
- if (!strncmp(buf, "start", count)) {
- ret = rproc_boot(rproc);
- if (ret) {
- dev_err(&rproc->dev, "Boot failed: %d\n", ret);
- return ret;
- }
- } else if (!strncmp(buf, "stop", count)) {
- rproc_shutdown(rproc);
- } else {
- dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
- return -EINVAL;
- }
-
- return count;
-}
-
-static const struct file_operations rproc_state_ops = {
- .read = rproc_state_read,
- .write = rproc_state_write,
- .open = simple_open,
- .llseek = generic_file_llseek,
-};
-
/* expose the name of the remote processor via debugfs */
static ssize_t rproc_name_read(struct file *filp, char __user *userbuf,
size_t count, loff_t *ppos)
@@ -265,8 +196,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
debugfs_create_file("name", 0400, rproc->dbg_dir,
rproc, &rproc_name_ops);
- debugfs_create_file("state", 0400, rproc->dbg_dir,
- rproc, &rproc_state_ops);
debugfs_create_file("recovery", 0400, rproc->dbg_dir,
rproc, &rproc_recovery_ops);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 4/4] remoteproc: debugfs: Remove state entry which is duplicated is sysfs
@ 2016-10-17 15:49 ` Matt Redfearn
0 siblings, 0 replies; 15+ messages in thread
From: Matt Redfearn @ 2016-10-17 15:49 UTC (permalink / raw)
To: Bjorn Andersson, Ohad Ben-Cohen
Cc: linux-remoteproc, linux-kernel, Matt Redfearn
Since there is now an always available state file in sysfs with the same
function as this one in debugfs, remove the redundant entry.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
Changes in v2: None
drivers/remoteproc/remoteproc_debugfs.c | 71 ---------------------------------
1 file changed, 71 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 374797206c79..1c122e230cec 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -59,75 +59,6 @@ static const struct file_operations trace_rproc_ops = {
.llseek = generic_file_llseek,
};
-/*
- * A state-to-string lookup table, for exposing a human readable state
- * via debugfs. Always keep in sync with enum rproc_state
- */
-static const char * const rproc_state_string[] = {
- "offline",
- "suspended",
- "running",
- "crashed",
- "invalid",
-};
-
-/* expose the state of the remote processor via debugfs */
-static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct rproc *rproc = filp->private_data;
- unsigned int state;
- char buf[30];
- int i;
-
- state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
-
- i = scnprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state],
- rproc->state);
-
- return simple_read_from_buffer(userbuf, count, ppos, buf, i);
-}
-
-static ssize_t rproc_state_write(struct file *filp, const char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct rproc *rproc = filp->private_data;
- char buf[10];
- int ret;
-
- if (count > sizeof(buf) || count <= 0)
- return -EINVAL;
-
- ret = copy_from_user(buf, userbuf, count);
- if (ret)
- return -EFAULT;
-
- if (buf[count - 1] == '\n')
- buf[count - 1] = '\0';
-
- if (!strncmp(buf, "start", count)) {
- ret = rproc_boot(rproc);
- if (ret) {
- dev_err(&rproc->dev, "Boot failed: %d\n", ret);
- return ret;
- }
- } else if (!strncmp(buf, "stop", count)) {
- rproc_shutdown(rproc);
- } else {
- dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
- return -EINVAL;
- }
-
- return count;
-}
-
-static const struct file_operations rproc_state_ops = {
- .read = rproc_state_read,
- .write = rproc_state_write,
- .open = simple_open,
- .llseek = generic_file_llseek,
-};
-
/* expose the name of the remote processor via debugfs */
static ssize_t rproc_name_read(struct file *filp, char __user *userbuf,
size_t count, loff_t *ppos)
@@ -265,8 +196,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
debugfs_create_file("name", 0400, rproc->dbg_dir,
rproc, &rproc_name_ops);
- debugfs_create_file("state", 0400, rproc->dbg_dir,
- rproc, &rproc_state_ops);
debugfs_create_file("recovery", 0400, rproc->dbg_dir,
rproc, &rproc_recovery_ops);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v2 4/4] remoteproc: debugfs: Remove state entry which is duplicated is sysfs
2016-10-17 15:49 ` Matt Redfearn
(?)
@ 2016-10-18 22:17 ` Bjorn Andersson
-1 siblings, 0 replies; 15+ messages in thread
From: Bjorn Andersson @ 2016-10-18 22:17 UTC (permalink / raw)
To: Matt Redfearn; +Cc: Ohad Ben-Cohen, linux-remoteproc, linux-kernel
On Mon 17 Oct 08:49 PDT 2016, Matt Redfearn wrote:
> Since there is now an always available state file in sysfs with the same
> function as this one in debugfs, remove the redundant entry.
>
> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
>
> Changes in v2: None
>
> drivers/remoteproc/remoteproc_debugfs.c | 71 ---------------------------------
> 1 file changed, 71 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 374797206c79..1c122e230cec 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -59,75 +59,6 @@ static const struct file_operations trace_rproc_ops = {
> .llseek = generic_file_llseek,
> };
>
> -/*
> - * A state-to-string lookup table, for exposing a human readable state
> - * via debugfs. Always keep in sync with enum rproc_state
> - */
> -static const char * const rproc_state_string[] = {
> - "offline",
> - "suspended",
> - "running",
> - "crashed",
> - "invalid",
> -};
> -
> -/* expose the state of the remote processor via debugfs */
> -static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
> - size_t count, loff_t *ppos)
> -{
> - struct rproc *rproc = filp->private_data;
> - unsigned int state;
> - char buf[30];
> - int i;
> -
> - state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
> -
> - i = scnprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state],
> - rproc->state);
> -
> - return simple_read_from_buffer(userbuf, count, ppos, buf, i);
> -}
> -
> -static ssize_t rproc_state_write(struct file *filp, const char __user *userbuf,
> - size_t count, loff_t *ppos)
> -{
> - struct rproc *rproc = filp->private_data;
> - char buf[10];
> - int ret;
> -
> - if (count > sizeof(buf) || count <= 0)
> - return -EINVAL;
> -
> - ret = copy_from_user(buf, userbuf, count);
> - if (ret)
> - return -EFAULT;
> -
> - if (buf[count - 1] == '\n')
> - buf[count - 1] = '\0';
> -
> - if (!strncmp(buf, "start", count)) {
> - ret = rproc_boot(rproc);
> - if (ret) {
> - dev_err(&rproc->dev, "Boot failed: %d\n", ret);
> - return ret;
> - }
> - } else if (!strncmp(buf, "stop", count)) {
> - rproc_shutdown(rproc);
> - } else {
> - dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
> - return -EINVAL;
> - }
> -
> - return count;
> -}
> -
> -static const struct file_operations rproc_state_ops = {
> - .read = rproc_state_read,
> - .write = rproc_state_write,
> - .open = simple_open,
> - .llseek = generic_file_llseek,
> -};
> -
> /* expose the name of the remote processor via debugfs */
> static ssize_t rproc_name_read(struct file *filp, char __user *userbuf,
> size_t count, loff_t *ppos)
> @@ -265,8 +196,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
>
> debugfs_create_file("name", 0400, rproc->dbg_dir,
> rproc, &rproc_name_ops);
> - debugfs_create_file("state", 0400, rproc->dbg_dir,
> - rproc, &rproc_state_ops);
> debugfs_create_file("recovery", 0400, rproc->dbg_dir,
> rproc, &rproc_recovery_ops);
> }
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 15+ messages in thread