[PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt

[PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt

[Masanari Iida]

This patch fix a spelling typo in cciss.txt

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
 Documentation/blockdev/cciss.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index b79d0a13e7cd..3a5477cc456e 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart Array controllers is to
 act as a RAID controller for disk drives, so the vast majority of commands
 are allocated for disk devices.  However, if you have more than a few tape
 drives attached to a smart array, the default number of commands may not be
-enought (for example, if you have 8 tape drives, you could only rewind 6
+enough (for example, if you have 8 tape drives, you could only rewind 6
 at one time with the default number of commands.)  The cciss_tape_cmds module
 parameter allows more commands (up to 16 more) to be allocated for use by
 tape drives.  For example:
-- 
2.10.1.502.g6598894

RE: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt

[Don Brace]

> -----Original Message-----
> From: Masanari Iida [mailto:standby24x7@gmail.com]
> Sent: Thursday, October 20, 2016 3:00 PM
> To: Don Brace; corbet@lwn.net; linux-doc@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: Masanari Iida
> Subject: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt
> 
> EXTERNAL EMAIL
> 
> 
> This patch fix a spelling typo in cciss.txt
> 
> Signed-off-by: Masanari Iida <standby24x7@gmail.com>
> ---
>  Documentation/blockdev/cciss.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/blockdev/cciss.txt
> b/Documentation/blockdev/cciss.txt
> index b79d0a13e7cd..3a5477cc456e 100644
> --- a/Documentation/blockdev/cciss.txt
> +++ b/Documentation/blockdev/cciss.txt
> @@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart
> Array controllers is to
>  act as a RAID controller for disk drives, so the vast majority of commands
>  are allocated for disk devices.  However, if you have more than a few tape
>  drives attached to a smart array, the default number of commands may not
> be
> -enought (for example, if you have 8 tape drives, you could only rewind 6
> +enough (for example, if you have 8 tape drives, you could only rewind 6
>  at one time with the default number of commands.)  The cciss_tape_cmds
> module
>  parameter allows more commands (up to 16 more) to be allocated for use by
>  tape drives.  For example:
> --
> 2.10.1.502.g6598894

Acked-by: Don Brace <don.brace@microsemi.com>

Re: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt

[Jonathan Corbet]

On Fri, 21 Oct 2016 04:59:32 +0900
Masanari Iida <standby24x7@gmail.com> wrote:

> This patch fix a spelling typo in cciss.txt

Applied to the docs tree, thanks.

jon