* iproute: ss truncates abstract unix domain socket embedding null @ 2016-10-16 20:43 Isaac Boukris 2016-10-18 18:46 ` Isaac Boukris 0 siblings, 1 reply; 6+ messages in thread From: Isaac Boukris @ 2016-10-16 20:43 UTC (permalink / raw) To: netdev Hello, The unix(7) man page says that null have no special meaning in abstract unix domain socket address (the length is specified therefore). However, when such name (embedding null) is used, ss (and netstat) will only show up to the first null occurrence (second technically, if we count the null prefix). e.g. the name "\0/tmp/fo\0.sock" is displayed as: "@/tmp/fo" (whilst strace tool shows it as: sun_path=@"/tmp/fo\0.sock"). Would it be more useful if it printed the whole name and escaped the null? If so, would '\0' be ok for escaping the null? Thanks! ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: iproute: ss truncates abstract unix domain socket embedding null 2016-10-16 20:43 iproute: ss truncates abstract unix domain socket embedding null Isaac Boukris @ 2016-10-18 18:46 ` Isaac Boukris 2016-10-26 17:15 ` Stephen Hemminger 0 siblings, 1 reply; 6+ messages in thread From: Isaac Boukris @ 2016-10-18 18:46 UTC (permalink / raw) To: netdev Hi again, On Sun, Oct 16, 2016 at 11:43 PM, Isaac Boukris <iboukris@gmail.com> wrote: > Hello, > > The unix(7) man page says that null have no special meaning in > abstract unix domain socket address (the length is specified > therefore). > > However, when such name (embedding null) is used, ss (and netstat) > will only show up to the first null occurrence (second technically, if > we count the null prefix). > e.g. the name "\0/tmp/fo\0.sock" is displayed as: "@/tmp/fo" (whilst > strace tool shows it as: sun_path=@"/tmp/fo\0.sock"). > > Would it be more useful if it printed the whole name and escaped the null? > If so, would '\0' be ok for escaping the null? Meanwhile, I've got it to escape the null character with with '\0' as suggested. Can anyone take a look and advise if I'm on the right track? Thanks! diff --git a/misc/ss.c b/misc/ss.c index dd77b81..3e41f44 100644 --- a/misc/ss.c +++ b/misc/ss.c @@ -2869,7 +2869,7 @@ static int unix_show_sock(const struct sockaddr_nl *addr, struct nlmsghdr *nlh, struct filter *f = (struct filter *)arg; struct unix_diag_msg *r = NLMSG_DATA(nlh); struct rtattr *tb[UNIX_DIAG_MAX+1]; - char name[128]; + char name[128*2]; struct sockstat stat = { .name = "*", .peer_name = "*" }; parse_rtattr(tb, UNIX_DIAG_MAX, (struct rtattr *)(r+1), @@ -2891,11 +2891,25 @@ static int unix_show_sock(const struct sockaddr_nl *addr, struct nlmsghdr *nlh, } if (tb[UNIX_DIAG_NAME]) { int len = RTA_PAYLOAD(tb[UNIX_DIAG_NAME]); + char *real_name = RTA_DATA(tb[UNIX_DIAG_NAME]); - memcpy(name, RTA_DATA(tb[UNIX_DIAG_NAME]), len); - name[len] = '\0'; - if (name[0] == '\0') + if (real_name[0] == '\0') { + int i, j; name[0] = '@'; + for (i = j = 1; i < len; ++i) { + if (real_name[i] == '\0') { + name[j++] = '\\'; + name[j++] = '0'; + } + else + name[j++] = real_name[i]; + } + name[j] = '\0'; + } else { + memcpy(name, real_name, len); + name[len] = '\0'; + } + stat.name = &name[0]; memcpy(stat.local.data, &stat.name, sizeof(stat.name)); } ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: iproute: ss truncates abstract unix domain socket embedding null 2016-10-18 18:46 ` Isaac Boukris @ 2016-10-26 17:15 ` Stephen Hemminger 2016-10-26 18:49 ` Isaac Boukris 0 siblings, 1 reply; 6+ messages in thread From: Stephen Hemminger @ 2016-10-26 17:15 UTC (permalink / raw) To: Isaac Boukris; +Cc: netdev On Tue, 18 Oct 2016 21:46:48 +0300 Isaac Boukris <iboukris@gmail.com> wrote: > Hi again, > > On Sun, Oct 16, 2016 at 11:43 PM, Isaac Boukris <iboukris@gmail.com> wrote: > > Hello, > > > > The unix(7) man page says that null have no special meaning in > > abstract unix domain socket address (the length is specified > > therefore). > > > > However, when such name (embedding null) is used, ss (and netstat) > > will only show up to the first null occurrence (second technically, if > > we count the null prefix). > > e.g. the name "\0/tmp/fo\0.sock" is displayed as: "@/tmp/fo" (whilst > > strace tool shows it as: sun_path=@"/tmp/fo\0.sock"). > > > > Would it be more useful if it printed the whole name and escaped the null? > > If so, would '\0' be ok for escaping the null? > > > Meanwhile, I've got it to escape the null character with with '\0' as suggested. > Can anyone take a look and advise if I'm on the right track? Thanks! I did a little investigation and current ss behavior matches the output of other commands (netstat and lsof). Therefore I really can't see the motivation to fix this. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: iproute: ss truncates abstract unix domain socket embedding null 2016-10-26 17:15 ` Stephen Hemminger @ 2016-10-26 18:49 ` Isaac Boukris 2016-10-26 22:22 ` Stephen Hemminger 0 siblings, 1 reply; 6+ messages in thread From: Isaac Boukris @ 2016-10-26 18:49 UTC (permalink / raw) To: Stephen Hemminger; +Cc: netdev Hi Stephen, thanks for looking into this. On Wed, Oct 26, 2016 at 8:15 PM, Stephen Hemminger <stephen@networkplumber.org> wrote: > On Tue, 18 Oct 2016 21:46:48 +0300 > Isaac Boukris <iboukris@gmail.com> wrote: > >> Hi again, >> >> On Sun, Oct 16, 2016 at 11:43 PM, Isaac Boukris <iboukris@gmail.com> wrote: >> > Hello, >> > >> > The unix(7) man page says that null have no special meaning in >> > abstract unix domain socket address (the length is specified >> > therefore). >> > >> > However, when such name (embedding null) is used, ss (and netstat) >> > will only show up to the first null occurrence (second technically, if >> > we count the null prefix). >> > e.g. the name "\0/tmp/fo\0.sock" is displayed as: "@/tmp/fo" (whilst >> > strace tool shows it as: sun_path=@"/tmp/fo\0.sock"). >> > >> > Would it be more useful if it printed the whole name and escaped the null? >> > If so, would '\0' be ok for escaping the null? >> >> >> Meanwhile, I've got it to escape the null character with with '\0' as suggested. >> Can anyone take a look and advise if I'm on the right track? Thanks! > > I did a little investigation and current ss behavior matches the output > of other commands (netstat and lsof). Therefore I really can't see the motivation > to fix this. The motivation behind the fix is because the usage of abstract unix domain socket is somewhat tricky. I've seen it being used incorrectly where for example the addrlen was specified as 'sizeof(struct sockaddr_un)' which is ok for regular unix sockets because their names are null-terminated, but with abstract sockets it causes extra null padding which leads to interoperability problems. On another occasion, addrlen was incremented to account for an additional null-termination byte. I was thinking therefore, it could help if the diagnostic tools would show all the significant bytes of the name in order to make it clear and easy to distinguish. On the other hand, I think I've complicated it a little bit with the '\0' escaping. Perhaps it would suffice to substitute each null character with an '@' sign, the same way we do for the null prefix. As regarding netstat, I have in fact made a patch for it, but then I realized it perhaps isn't its fault as it prints what it reads from '/proc/net/unix' which prints the null prefix as '@' but leaves subsequent nulls as is (literally, can be seen with 'cat -A'). So I'm trying to see if '/proc/net/unix' can be fixed to translate all null occurrences to '@' sign (not only the prefix). This should fix netstat and also (I think) the alternative 'proc' base implementation in ss (unix_use_proc). What do you think? ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: iproute: ss truncates abstract unix domain socket embedding null 2016-10-26 18:49 ` Isaac Boukris @ 2016-10-26 22:22 ` Stephen Hemminger 2016-10-29 19:35 ` Isaac Boukris 0 siblings, 1 reply; 6+ messages in thread From: Stephen Hemminger @ 2016-10-26 22:22 UTC (permalink / raw) To: Isaac Boukris; +Cc: netdev On Wed, 26 Oct 2016 21:49:35 +0300 Isaac Boukris <iboukris@gmail.com> wrote: > Hi Stephen, thanks for looking into this. > > On Wed, Oct 26, 2016 at 8:15 PM, Stephen Hemminger > <stephen@networkplumber.org> wrote: > > On Tue, 18 Oct 2016 21:46:48 +0300 > > Isaac Boukris <iboukris@gmail.com> wrote: > > > >> Hi again, > >> > >> On Sun, Oct 16, 2016 at 11:43 PM, Isaac Boukris <iboukris@gmail.com> wrote: > >> > Hello, > >> > > >> > The unix(7) man page says that null have no special meaning in > >> > abstract unix domain socket address (the length is specified > >> > therefore). > >> > > >> > However, when such name (embedding null) is used, ss (and netstat) > >> > will only show up to the first null occurrence (second technically, if > >> > we count the null prefix). > >> > e.g. the name "\0/tmp/fo\0.sock" is displayed as: "@/tmp/fo" (whilst > >> > strace tool shows it as: sun_path=@"/tmp/fo\0.sock"). > >> > > >> > Would it be more useful if it printed the whole name and escaped the null? > >> > If so, would '\0' be ok for escaping the null? > >> > >> > >> Meanwhile, I've got it to escape the null character with with '\0' as suggested. > >> Can anyone take a look and advise if I'm on the right track? Thanks! > > > > I did a little investigation and current ss behavior matches the output > > of other commands (netstat and lsof). Therefore I really can't see the motivation > > to fix this. > > The motivation behind the fix is because the usage of abstract unix > domain socket is somewhat tricky. > I've seen it being used incorrectly where for example the addrlen was > specified as 'sizeof(struct sockaddr_un)' which is ok for regular unix > sockets because their names are null-terminated, but with abstract > sockets it causes extra null padding which leads to interoperability > problems. > On another occasion, addrlen was incremented to account for an > additional null-termination byte. > > I was thinking therefore, it could help if the diagnostic tools would > show all the significant bytes of the name in order to make it clear > and easy to distinguish. > > On the other hand, I think I've complicated it a little bit with the > '\0' escaping. > Perhaps it would suffice to substitute each null character with an '@' > sign, the same way we do for the null prefix. > > As regarding netstat, I have in fact made a patch for it, but then I > realized it perhaps isn't its fault as it prints what it reads from > '/proc/net/unix' which prints the null prefix as '@' but leaves > subsequent nulls as is (literally, can be seen with 'cat -A'). > So I'm trying to see if '/proc/net/unix' can be fixed to translate all > null occurrences to '@' sign (not only the prefix). > This should fix netstat and also (I think) the alternative 'proc' base > implementation in ss (unix_use_proc). > > What do you think? Just translating all null characters to @ seems the most consistent and logical. Also translating other all non-printing characters to something (maybe '?') might be wise. It would be nice if all utilities output the same thing. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: iproute: ss truncates abstract unix domain socket embedding null 2016-10-26 22:22 ` Stephen Hemminger @ 2016-10-29 19:35 ` Isaac Boukris 0 siblings, 0 replies; 6+ messages in thread From: Isaac Boukris @ 2016-10-29 19:35 UTC (permalink / raw) To: Stephen Hemminger; +Cc: netdev On Thu, Oct 27, 2016 at 1:22 AM, Stephen Hemminger <stephen@networkplumber.org> wrote: > Just translating all null characters to @ seems the most consistent and > logical. Also translating other all non-printing characters to something (maybe '?') > might be wise. It would be nice if all utilities output the same thing. I've sent two patches to netdev with which all of ss, netstat and lsof would translate all null bytes the same way. I left out the other non-printable characters as I wasn't as confident about it. Thanks. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-10-29 19:35 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-10-16 20:43 iproute: ss truncates abstract unix domain socket embedding null Isaac Boukris 2016-10-18 18:46 ` Isaac Boukris 2016-10-26 17:15 ` Stephen Hemminger 2016-10-26 18:49 ` Isaac Boukris 2016-10-26 22:22 ` Stephen Hemminger 2016-10-29 19:35 ` Isaac Boukris
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.