Re: [PATCHv4 11/15] clk: ti: clockdomain: add clock provider support to clockdomains

[Stephen Boyd <sboyd@codeaurora.org>]

On 10/28, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [161028 00:43]:
> > On 28/10/16 03:50, Stephen Boyd wrote:
> > > I suppose a PRCM is
> > > like an MFD that has clocks and resets under it? On other
> > > platforms we've combined that all into one node and just had
> > > #clock-cells and #reset-cells in that node. Is there any reason
> > > we can't do that here?
> > 
> > For OMAPs, there are typically multiple instances of the PRCM around; OMAP4
> > for example has:
> > 
> > cm1 @ 0x4a004000 (clocks + clockdomains)
> > cm2 @ 0x4a008000 (clocks + clockdomains)
> > prm @ 0x4a306000 (few clocks + resets + power state handling)
> > scrm @ 0x4a30a000 (few external clocks + plenty of misc stuff)
> > 
> > These instances are also under different power/voltage domains which means
> > their PM behavior is different.
> > 
> > The idea behind having a clockdomain as a provider was mostly to have the
> > topology visible : prcm-instance -> clockdomain -> clocks
> 
> Yeah that's needed to get the interconnect hierarchy right for
> genpd :)
> 
> > ... but basically I think it would be possible to drop the clockdomain
> > representation and just mark the prcm-instance as a clock provider. Tony,
> > any thoughts on that?
> 
> No let's not drop the clockdomains as those will be needed when we
> move things into proper hierarchy within the interconnect instances.
> This will then help with getting things right with genpd.
> 
> In the long run we just want to specify clockdomain and the offset of
> the clock instance within the clockdomain in the dts files.
> 

Sorry, I have very little idea how OMAP hardware works. Do you
mean that you will have different nodes for each clockdomain so
that genpd can map 1:1 to the node in dts? But in hardware
there's a prcm that allows us to control many clock domains
through register read/writes? How is the interconnect involved?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project