From: Ladislav Michl <ladis@linux-mips.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv2 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO
Date: Fri, 4 Nov 2016 12:55:21 +0100 [thread overview]
Message-ID: <20161104115521.GA7713@localhost.localdomain> (raw)
In-Reply-To: <20161104114711.GA7540@localhost.localdomain>
As a single U-Boot binary can now run on various board modifications,
drop CONFIG_DISPLAY_BOARDINFO as it prints flash memory information
too early to give us chance to easily detect it. Also saves few bytes
as a bonus.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
Changes in v2:
- update to current git (uses Kconfig)
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 808955e..71688cc 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -27,24 +27,6 @@
DECLARE_GLOBAL_DATA_PTR;
-const omap3_sysinfo sysinfo = {
- DDR_STACKED,
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
- "IGEPv2",
-#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
- "IGEP COM MODULE/ELECTRON",
-#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
- "IGEP COM PROTON",
-#endif
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
- "ONENAND",
-#else
- "NAND",
-#endif
-};
-
static const struct ns16550_platdata igep_serial = {
.base = OMAP34XX_UART3,
.reg_shift = 2,
diff --git a/configs/igep0020_defconfig b/configs/igep0020_defconfig
index 9c247d7..c25b6b8 100644
--- a/configs/igep0020_defconfig
+++ b/configs/igep0020_defconfig
@@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
diff --git a/configs/igep0030_defconfig b/configs/igep0030_defconfig
index 1312ddb..75f731d 100644
--- a/configs/igep0030_defconfig
+++ b/configs/igep0030_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
diff --git a/configs/igep0032_defconfig b/configs/igep0032_defconfig
index 37e46b0..1819995 100644
--- a/configs/igep0032_defconfig
+++ b/configs/igep0032_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ONENAND_SUPPORT=y
--
2.1.4
next prev parent reply other threads:[~2016-11-04 11:55 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-20 9:04 [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Ladislav Michl
2016-09-20 9:07 ` [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
2016-09-20 12:52 ` Tom Rini
2016-09-20 22:44 ` Ladislav Michl
2016-09-20 23:45 ` Tom Rini
2016-09-20 23:52 ` Ladislav Michl
2016-09-21 0:26 ` Tom Rini
2016-09-21 9:39 ` Ladislav Michl
2016-09-21 11:46 ` Enric Balletbo Serra
2016-09-21 12:51 ` Tom Rini
2016-09-21 13:46 ` Enric Balletbo Serra
2016-09-21 14:02 ` Tom Rini
2016-09-22 5:12 ` Ladislav Michl
2016-09-20 9:09 ` [U-Boot] [PATCH 3/3] igep00x0: add Hynix timings Ladislav Michl
2016-09-20 15:41 ` [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Enric Balletbo Serra
2016-09-20 23:10 ` Ladislav Michl
2016-11-04 11:47 ` Ladislav Michl
2016-11-04 11:55 ` Ladislav Michl [this message]
[not found] ` <ef3936d3-3967-bc71-4fdc-7a78b12a3c45@osg.samsung.com>
2016-11-04 17:21 ` [U-Boot] [PATCHv2 " Ladislav Michl
2016-11-04 19:34 ` Javier Martinez Canillas
2016-11-04 19:36 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot, PATCHv2, " Tom Rini
2016-11-04 11:57 ` [U-Boot] [PATCHv2 2/3] igep00x0: consolidate defconfigs Ladislav Michl
2016-11-04 19:37 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot,PATCHv2,2/3] " Tom Rini
2016-11-04 11:59 ` [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings Ladislav Michl
2016-11-04 19:39 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot,PATCHv2,3/3] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161104115521.GA7713@localhost.localdomain \
--to=ladis@linux-mips.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.