From: Ladislav Michl <ladis@linux-mips.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings
Date: Fri, 4 Nov 2016 12:59:46 +0100 [thread overview]
Message-ID: <20161104115946.GC7713@localhost.localdomain> (raw)
In-Reply-To: <20161104114711.GA7540@localhost.localdomain>
Tested on IGEPv2 with Micron MT29F4G16ABBDA3W and
Hynix H27S4G6F2DKA-BM
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
Changes in v2:
- None
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 71688cc..669f3dd 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -84,10 +84,22 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
int mfr, id, err = identify_nand_chip(&mfr, &id);
timings->mr = MICRON_V_MR_165;
- if (!err && mfr == NAND_MFR_MICRON) {
- timings->mcfg = MICRON_V_MCFG_200(256 << 20);
- timings->ctrla = MICRON_V_ACTIMA_200;
- timings->ctrlb = MICRON_V_ACTIMB_200;
+ if (!err) {
+ switch (mfr) {
+ case NAND_MFR_HYNIX:
+ timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
+ timings->ctrla = HYNIX_V_ACTIMA_200;
+ timings->ctrlb = HYNIX_V_ACTIMB_200;
+ break;
+ case NAND_MFR_MICRON:
+ timings->mcfg = MICRON_V_MCFG_200(256 << 20);
+ timings->ctrla = MICRON_V_ACTIMA_200;
+ timings->ctrlb = MICRON_V_ACTIMB_200;
+ break;
+ default:
+ /* Should not happen... */
+ break;
+ }
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
gpmc_cs0_flash = MTD_DEV_TYPE_NAND;
} else {
--
2.1.4
next prev parent reply other threads:[~2016-11-04 11:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-20 9:04 [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Ladislav Michl
2016-09-20 9:07 ` [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs Ladislav Michl
2016-09-20 12:52 ` Tom Rini
2016-09-20 22:44 ` Ladislav Michl
2016-09-20 23:45 ` Tom Rini
2016-09-20 23:52 ` Ladislav Michl
2016-09-21 0:26 ` Tom Rini
2016-09-21 9:39 ` Ladislav Michl
2016-09-21 11:46 ` Enric Balletbo Serra
2016-09-21 12:51 ` Tom Rini
2016-09-21 13:46 ` Enric Balletbo Serra
2016-09-21 14:02 ` Tom Rini
2016-09-22 5:12 ` Ladislav Michl
2016-09-20 9:09 ` [U-Boot] [PATCH 3/3] igep00x0: add Hynix timings Ladislav Michl
2016-09-20 15:41 ` [U-Boot] [PATCH 1/3] igep00x0: disable CONFIG_DISPLAY_BOARDINFO Enric Balletbo Serra
2016-09-20 23:10 ` Ladislav Michl
2016-11-04 11:47 ` Ladislav Michl
2016-11-04 11:55 ` [U-Boot] [PATCHv2 " Ladislav Michl
[not found] ` <ef3936d3-3967-bc71-4fdc-7a78b12a3c45@osg.samsung.com>
2016-11-04 17:21 ` Ladislav Michl
2016-11-04 19:34 ` Javier Martinez Canillas
2016-11-04 19:36 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot, PATCHv2, " Tom Rini
2016-11-04 11:57 ` [U-Boot] [PATCHv2 2/3] igep00x0: consolidate defconfigs Ladislav Michl
2016-11-04 19:37 ` Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot,PATCHv2,2/3] " Tom Rini
2016-11-04 11:59 ` Ladislav Michl [this message]
2016-11-04 19:39 ` [U-Boot] [PATCHv2 3/3] igep00x0: add Hynix timings Javier Martinez Canillas
2016-11-13 20:58 ` [U-Boot] [U-Boot,PATCHv2,3/3] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161104115946.GC7713@localhost.localdomain \
--to=ladis@linux-mips.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.