All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support
Date: Tue, 8 Nov 2016 17:27:04 +0100	[thread overview]
Message-ID: <20161108172704.4faed4e2@bbrezillon> (raw)
In-Reply-To: <6c44b7aa93af6ffd76d4d0bee5713f087e082c62.1478621974.git-series.maxime.ripard@free-electrons.com>

On Tue,  8 Nov 2016 17:21:13 +0100
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:

> From: Hans de Goede <hdegoede@redhat.com>
> 
> Enable the NAND and UBI support in the configuration header so that we can
> (finally) use it.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  include/configs/sunxi-common.h | 26 ++++++++++++++++++++++----
>  1 file changed, 22 insertions(+), 4 deletions(-)
> 
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 8363414828fa..1733767ba53b 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -129,9 +129,23 @@
>  #define CONFIG_SERIAL_TAG
>  
>  #ifdef CONFIG_NAND_SUNXI
> +#define CONFIG_SYS_NAND_U_BOOT_OFFS	(8 << 20) /* 8 MiB */


>  #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
>  #define CONFIG_SYS_NAND_ONFI_DETECTION
>  #define CONFIG_SYS_MAX_NAND_DEVICE 8
> +
> +/* Requirements for UBI */
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#define CONFIG_MTD_DEVICE
> +
> +#define CONFIG_MTD_PARTITIONS
> +
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_NAND_TRIMFFS
>  #endif
>  
>  #ifdef CONFIG_SPL_SPI_SUNXI
> @@ -143,7 +157,14 @@
>  #define CONFIG_GENERIC_MMC
>  #define CONFIG_MMC_SUNXI
>  #define CONFIG_MMC_SUNXI_SLOT		0
> -#define CONFIG_ENV_IS_IN_MMC
> +#endif
> +
> +#if defined(CONFIG_ENV_IS_IN_NAND)
> +#define CONFIG_ENV_OFFSET			0xc00000
> +#define CONFIG_ENV_SIZE				0x400000
> +#elif defined(CONFIG_ENV_IS_IN_MMC)
> +#define CONFIG_ENV_OFFSET			(544 << 10) /* (8 + 24 + 512) KiB */
> +#define CONFIG_ENV_SIZE				(128 << 10) /* 128 KiB */
>  #define CONFIG_SYS_MMC_ENV_DEV		0	/* first detected MMC controller */
>  #endif
>  
> @@ -175,9 +196,6 @@
>  
>  #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */
>  
> -#define CONFIG_ENV_OFFSET		(544 << 10) /* (8 + 24 + 512) KiB */
> -#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
> -
>  #define CONFIG_FAT_WRITE	/* enable write access */
>  
>  #define CONFIG_SPL_FRAMEWORK

  reply	other threads:[~2016-11-08 16:27 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-08 16:21 [U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro Maxime Ripard
2016-11-08 16:21 ` [U-Boot] [PATCH 1/7] sunxi: Sync GR8 DTS and AXP209 with the kernel Maxime Ripard
2016-11-14 11:15   ` Hans de Goede
2016-11-08 16:21 ` [U-Boot] [PATCH 2/7] mtd: nand: add support for the TC58NVG2S0H chip Maxime Ripard
2016-11-14 11:15   ` Hans de Goede
2016-11-15  5:04   ` Scott Wood
2016-11-08 16:21 ` [U-Boot] [PATCH 3/7] sunxi: Enable UBI and NAND support Maxime Ripard
2016-11-08 16:27   ` Boris Brezillon [this message]
2016-11-08 16:27   ` Boris Brezillon
2016-11-09 14:32     ` Maxime Ripard
2016-11-09 14:57       ` Boris Brezillon
2016-11-14 11:18   ` Hans de Goede
2016-11-14 14:09     ` Maxime Ripard
2016-11-14 14:12       ` Hans de Goede
2016-11-14 14:12     ` Maxime Ripard
2016-11-14 14:21       ` Hans de Goede
2016-11-14 17:03         ` Tom Rini
2016-11-17 22:27         ` Maxime Ripard
2016-11-08 16:21 ` [U-Boot] [PATCH 4/7] tools: sunxi: Add spl image builder Maxime Ripard
2016-11-08 16:29   ` Boris Brezillon
2016-11-08 20:45     ` Maxime Ripard
2016-11-11 16:20   ` Tom Rini
2016-11-14 15:20     ` Maxime Ripard
2016-11-14 15:25       ` Tom Rini
2016-11-14 18:58         ` Maxime Ripard
2016-11-14 18:59           ` Tom Rini
2016-11-14 11:18   ` Hans de Goede
2016-11-14 11:29     ` Hans de Goede
2016-11-14 13:53       ` Maxime Ripard
2016-11-14 14:01         ` Hans de Goede
2016-11-08 16:21 ` [U-Boot] [PATCH 5/7] nand: sunxi: Add options for the SPL NAND configuration Maxime Ripard
2016-11-08 16:31   ` Boris Brezillon
2016-11-14 11:19   ` Hans de Goede
2016-11-15  5:07   ` Scott Wood
2016-11-08 16:21 ` [U-Boot] [PATCH 6/7] scripts: sunxi: Build an raw SPL image Maxime Ripard
2016-11-08 16:33   ` Boris Brezillon
2016-11-14 11:19   ` Hans de Goede
2016-11-14 11:30     ` Hans de Goede
2016-11-08 16:21 ` [U-Boot] [PATCH 7/7] sunxi: Add support for the CHIP Pro Maxime Ripard
2016-11-14 11:20   ` Hans de Goede
2016-11-09  7:47 ` [U-Boot] [PATCH 0/7] " Heiko Schocher
2016-11-09 14:44   ` Maxime Ripard
2016-11-10 11:57     ` Heiko Schocher
2016-11-11 16:24       ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161108172704.4faed4e2@bbrezillon \
    --to=boris.brezillon@free-electrons.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.